| Author |
Message |
pecajeff
|
|
Post subject: Live CD Boot Problem (Viola)
 Posted: Jul 02, 2008 - 09:03 PM
|
|
Joined: Jul 02, 2008
Posts: 3
Status: Offline
|
|
I am unable to get the ver 1.5 live CD to boot completely on my Thinkpad T30. It will boot my T40 without any problems. Version 1.0 booted on my T30 without issue.
The boot gets as far as this:
INIT: version 2.86 booting
Running Linux Kernel 2.6.24-parsix-23
Processor 0 is Mobile Intel(R) Pentium (R) 4 - M CPU 1.80GHz 1794MHz, 512 KB Cache
Enable udev.
At this point it just hangs and never completes the boot. I know the CD and the image is good as it does work on the T40.
Any suggestions? |
Last edited by pecajeff on Jul 03, 2008 - 01:00 PM; edited 1 time in total
|
| |
|
|
|
 |
|
blix
|
|
|
Post subject: RE: Live CD Boot Problem (Viola)
Posted: Jul 03, 2008 - 03:16 AM
|
|
Forum Moderator
Joined: Jun 19, 2007
Posts: 72
Status: Offline
|
|
| Testing some boot options may help you to bood correctly. I suggest "fail safe" option if you did not test it yet. |
_________________
Those who sacrifice liberty for security deserve neither.
Benjamin Franklin
|
| |
|
|
|
|
|
pecajeff
|
|
|
Post subject:
Posted: Jul 03, 2008 - 12:59 PM
|
|
Joined: Jul 02, 2008
Posts: 3
Status: Offline
|
|
| I tried the "fail safe" option and got the same result. I added, one at a time, noapic, nolapic, acpi=off, noacpi, pci=noacpi, and nopcmcia to the boot options without success. |
|
|
| |
|
|
|
|
|
alan
|
|
|
Post subject:
Posted: Jul 05, 2008 - 06:09 AM
|
|
Developer
Joined: Jan 25, 2005
Posts: 325
Location: Glendale, California
Status: Offline
|
|
| Would you send us lspci output? |
|
|
| |
|
|
|
|
|
Motux
|
|
|
Post subject:
Posted: Jul 08, 2008 - 02:21 PM
|
|
Joined: Jul 11, 2007
Posts: 7
Status: Offline
|
|
Hi,
I have same problem with an Thinkpad X23 ... 
At first time all is ok :
LiveCD mode ok
Install ok
First reboot ok
but when docking station was removed (CD and Floppy drives not necessary)
boot sequence freeze after /dev/udev loading ... 
I tried to replug the docking but it freeze always
I also tried failsafe, noacpi ...
I must reboot in LiveCD mode
Thanks for your help  |
|
|
| |
|
|
|
|
|
pecajeff
|
|
|
Post subject:
Posted: Jul 08, 2008 - 10:17 PM
|
|
Joined: Jul 02, 2008
Posts: 3
Status: Offline
|
|
Alan,
This is what I got when I ran lspci:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) |
|
|
| |
|
|
|
|
|
|
FAQ
Search
Register
Log in to check your private messages
Log in
