Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/gnome-settings-daemon.postinst =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/gnome-settings-daemon.postinst (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/gnome-settings-daemon.postinst (revision 6565) @@ -0,0 +1,16 @@ +#! /bin/sh +set -e + +# Remove obsolete conffiles + +case "$1" in +configure) + if dpkg --compare-versions "$2" lt-nl "2.24.1"; then + rm -rf /etc/gnome/config/xrdb + fi + if dpkg --compare-versions "$2" lt-nl "2.26.1"; then + rm -f /etc/xdg/autostart/gnome-settings-daemon.desktop + fi +esac + +#DEBHELPER# Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/watch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/watch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/watch (revision 6565) @@ -0,0 +1,3 @@ +version=2 +http://ftp.gnome.org/pub/GNOME/sources/gnome-settings-daemon/([\d\.]+)[02468]/ \ +gnome-settings-daemon-([\d\.]+)\.tar\.gz Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/changelog =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/changelog (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/changelog (revision 6565) @@ -0,0 +1,213 @@ +gnome-settings-daemon (2.28.2-parsix1) unstable; urgency=low + + * Sync'd with Debian 2.28.1-3 + * Regenerated 70_relibtoolize.patch + + -- Alan Baghumian Wed, 21 Apr 2010 19:06:14 -0700 + +gnome-settings-daemon (2.28.1-3) unstable; urgency=low + + * Depend on libgnome2-common for the GConf schemas. + * 40_xklavier_5.0.patch: new patch. Get 2.28 version to work with + libxklavier 5.0. + * Require said version to build. + + -- Josselin Mouette Fri, 09 Apr 2010 00:17:00 +0200 + +gnome-settings-daemon (2.28.1-2) unstable; urgency=low + + * Drop libxxf86misc-dev build-dependency. This extension is only used + as a fallback to XKB. Closes: #559690. + * 12_monitor_network_fs.patch: new patch. Don’t monitor remote + filesystems for their free size. Closes: #563592. + + -- Josselin Mouette Sat, 09 Jan 2010 10:59:14 +0100 + +gnome-settings-daemon (2.28.1-1) unstable; urgency=low + + * New upstream release. + - debian/patches/70_relibtoolize.patch: + + Updated. + * debian/rules: remove check-dist.mk to upload to unstable. + + -- Emilio Pozuelo Monfort Thu, 22 Oct 2009 06:08:36 +0200 + +gnome-settings-daemon (2.28.0-1) experimental; urgency=low + + * Add a watch file. + * Add a manpage for gnome-settings-daemon, thanks Joshua Cummings! + Closes: #494370. + * debian/control.in: remove trailing whitespaces. + * Standards-Version is 3.8.2, no changes needed. + * New upstream release. + - debian/control.in: + + Bump libgtk2.0-dev and libgnome-desktop-dev build dependencies. + + Remove libglade2-dev build dependency, no longer needed. + + Build depend on libxklavier-dev >= 4.0 instead of libxklavier12-dev. + + Break gnome-screensaver << 2.28 since g-s-d doesn't start it anymore, + relaying on the autostart file in g-s 2.28. + - debian/patches/20_gstreamer.patch, + debian/patches/70_relibtoolize.patch: + + Updated to apply again. + - debian/gnome-settings-daemon.install: + + Install *.ui rather than *.glade. + + Don't install *.png, the icon is not shipped anymore. + * Standards-Version is 3.8.3, no changes needed. + * debian/rules: + - Don't touch every file anymore, it was done because of a broken tarball. + - Include check-dist.mk to avoid uploads to unstable. + + -- Emilio Pozuelo Monfort Fri, 09 Oct 2009 17:26:43 +0200 + +gnome-settings-daemon (2.26.1-2) unstable; urgency=low + + * 03_maintainer_mode.patch: new patch, add AM_MAINTAINER_MODE. Fixes + FTBFS. + * Regenerate 70_relibtoolize.patch. + + -- Josselin Mouette Fri, 29 May 2009 16:19:52 +0200 + +gnome-settings-daemon (2.26.1-1) unstable; urgency=low + + * New upstream release. + + 20_gstreamer.patch: install the plugin although pulse is disabled. + + Refresh 70_relibtoolize.patch. + * Move the autostart file to /usr/share/gnome/autostart. + * gnome-settings-daemon.postinst: + + Remove the old autostart file if needed. + + Only remove the xrdb stuff upon upgrades from pre-2.24.1. + + -- Josselin Mouette Fri, 29 May 2009 11:25:35 +0200 + +gnome-settings-daemon (2.26.0-2) experimental; urgency=low + + * 20_gstreamer.patch: Initialize Gerror * variables to NULL before + usage. Fixes a crasher when using media keys (Closes: #524165) + + -- Sjoerd Simons Sat, 18 Apr 2009 11:00:25 +0100 + +gnome-settings-daemon (2.26.0-1) experimental; urgency=low + + * New upstream release. + * Update build-dependencies. + * Install the autostart file and the keybindings XML file. + + Break gnome-session < 2.24 which would attempt to start it twice + with the autostart file. + * 11_sleepkey.patch: updated for the new version. + * 20_gstreamer.patch: new patch from Romain Périer, adds back support + for GStreamer with a selection at compile time. + * 70_relibtoolize.patch: regenerated. + * Refresh other patches. + * Pass --disable-pulse to configure, to use the GStreamer code + instead. + + -- Josselin Mouette Sat, 11 Apr 2009 11:31:52 +0200 + +gnome-settings-daemon (2.24.1-2) unstable; urgency=low + + [ Josselin Mouette ] + * Improve package descriptions. Mention XSETTINGS. Closes: #511905. + * Upload to unstable. + + [ Loic Minier ] + * Suggest x11-xserver-utils as gnome-settings-daemon attempts to run xrdb by + default and logs a warning when that fails. + * Suggest gnome-screensaver as gnome-settings-daemon attempts to start it by + default and logs a warning when that fails. + * Suggest metacity | x-window-manager as gnome-settings-daemon attemts to + start a window manager and logs a warning when that fails. + + -- Josselin Mouette Tue, 07 Apr 2009 08:48:36 +0200 + +gnome-settings-daemon (2.24.1-1) experimental; urgency=low + + * New upstream release. + + Cleans up thumbnail cache automatically. Closes: #235067. + * Update build-dependencies and -dev dependencies. + * Standards version is 3.8.0. + * Switch to quilt for patch management; build-depend on quilt. + * 02_missing_libs.patch: explicitly add X11 libraries to + SETTINGS_PLUGINS since plugins are actually relying on them being + available. + * 70_relibtoolize.patch: new patch, relibtoolize the source. + * 99_ltmain_as-needed.patch: new patch, make --as-needed work. + * Pass -O1 -z defs --as-needed to the linker. + + Only warn on undefined symbols as plugins need a symbol from the + daemon. + * Add some comments in the patches. + * Pass --no-act to dh_makeshlibs. + * gnome-settings-daemon.postinst: remove /etc/gnome/config/xrdb. + * Install .ad files in /etc/gnome/config to replace the ones from + capplets-data which are still used. + * Do not install the autostart file since we still use gnome-session + 2.22 which will start g-s-d by hand. + + -- Josselin Mouette Sat, 27 Dec 2008 11:29:41 +0100 + +gnome-settings-daemon (2.22.2.1-2) unstable; urgency=low + + * 08_extra_touchpad_options.patch: removed broken patch from Ubuntu. + Closes: #481191. + * 11_sleepkey.patch: use gnome-power-cmd to suspend the computer + instead of the nonexistent gdm-signal. + + -- Josselin Mouette Tue, 11 Nov 2008 16:08:08 +0100 + +gnome-settings-daemon (2.22.2.1-1) unstable; urgency=low + + [ Josselin Mouette ] + * Fix priority. + + [ Sebastian Dröge ] + * New upstream bugfix release: + + debian/rules: + - Run touch on every file to fix up timestamps. + + -- Sebastian Dröge Thu, 29 May 2008 10:31:39 +0200 + +gnome-settings-daemon (2.22.1-2) unstable; urgency=high + + * Conflict against gnome-control-center < 2.21.5. Closes: #476802. + + -- Josselin Mouette Sat, 19 Apr 2008 22:17:49 +0200 + +gnome-settings-daemon (2.22.1-1) unstable; urgency=low + + * New upstream bugfix release: + + debian/patches/09_locate_pointer.patch: + - Dropped, fixed upstream. + + -- Sebastian Dröge Mon, 07 Apr 2008 14:44:12 +0200 + +gnome-settings-daemon (2.22.0-4) unstable; urgency=low + + * debian/control.in: + + Also conflict with totem (<< 2.22.0) for the same reason. + * debian/gnome-settings-daemon.install: + + Install xrdb files into /etc/gnome/config again. + + -- Sebastian Dröge Sat, 22 Mar 2008 14:56:12 +0100 + +gnome-settings-daemon (2.22.0-3) unstable; urgency=low + + * Upload to unstable. + * debian/control.in: + + Add conflicts with rhythmbox (<< 0.11.5) and banshee (<< 0.13.2+dfsg-7) + as the multimedia keys DBus interface changed. + + -- Sebastian Dröge Wed, 19 Mar 2008 01:47:15 +0100 + +gnome-settings-daemon (2.22.0-2) experimental; urgency=low + + * debian/rules: + + Don't install the dbus service file. This is not meant to be autostarted + but should be started by gnome-session. + + -- Sebastian Dröge Sun, 16 Mar 2008 17:39:52 +0100 + +gnome-settings-daemon (2.22.0-1) experimental; urgency=low + + * New package, based on the Ubuntu packaging. + + -- Sebastian Dröge Wed, 12 Mar 2008 15:17:19 +0100 + Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/series =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/series (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/series (revision 6565) @@ -0,0 +1,10 @@ +01_xrdb.patch +02_missing_libs.patch +03_maintainer_mode.patch +11_sleepkey.patch +12_monitor_network_fs.patch +20_gstreamer.patch +30_pkgconfig-path.patch +40_xklavier_5.0.patch +70_relibtoolize.patch +99_ltmain_as-needed.patch Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/03_maintainer_mode.patch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/03_maintainer_mode.patch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/03_maintainer_mode.patch (revision 6565) @@ -0,0 +1,12 @@ +Index: gnome-settings-daemon-2.26.1/configure.ac +=================================================================== +--- gnome-settings-daemon-2.26.1.orig/configure.ac 2009-05-29 16:19:04.081105324 +0200 ++++ gnome-settings-daemon-2.26.1/configure.ac 2009-05-29 16:19:32.437481894 +0200 +@@ -11,6 +11,7 @@ AC_INIT([gnome-settings-daemon], + AC_CONFIG_SRCDIR([gnome-settings-daemon/gnome-settings-manager.c]) + + AM_INIT_AUTOMAKE([1.9 no-dist-gzip dist-bzip2 tar-ustar]) ++AM_MAINTAINER_MODE + + AC_STDC_HEADERS + AC_PROG_CXX Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/01_xrdb.patch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/01_xrdb.patch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/01_xrdb.patch (revision 6565) @@ -0,0 +1,15 @@ +Change the directory for xrdb data. + +Index: gnome-settings-daemon-2.26.0/plugins/xrdb/gsd-xrdb-manager.c +=================================================================== +--- gnome-settings-daemon-2.26.0.orig/plugins/xrdb/gsd-xrdb-manager.c 2009-01-05 17:26:26.000000000 +0100 ++++ gnome-settings-daemon-2.26.0/plugins/xrdb/gsd-xrdb-manager.c 2009-04-11 13:36:54.898047572 +0200 +@@ -42,7 +42,7 @@ + + #define GSD_XRDB_MANAGER_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), GSD_TYPE_XRDB_MANAGER, GsdXrdbManagerPrivate)) + +-#define SYSTEM_AD_DIR DATADIR "/xrdb" ++#define SYSTEM_AD_DIR "/etc/gnome/config" + #define GENERAL_AD SYSTEM_AD_DIR "/General.ad" + #define USER_AD_DIR ".gnome2/xrdb" + #define USER_X_RESOURCES ".Xresources" Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/11_sleepkey.patch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/11_sleepkey.patch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/11_sleepkey.patch (revision 6565) @@ -0,0 +1,16 @@ +Use gnome-power-cmd to suspend the computer instead of the nonexistent +gdm-signal. + +Index: gnome-settings-daemon-2.26.0/plugins/media-keys/gsd-media-keys-manager.c +=================================================================== +--- gnome-settings-daemon-2.26.0.orig/plugins/media-keys/gsd-media-keys-manager.c 2009-01-22 13:08:29.000000000 +0100 ++++ gnome-settings-daemon-2.26.0/plugins/media-keys/gsd-media-keys-manager.c 2009-04-11 13:38:05.607025529 +0200 +@@ -71,7 +71,7 @@ + #if defined(__OpenBSD__) || defined(__FreeBSD__) + # define SLEEP_COMMAND "zzz" + #else +-# define SLEEP_COMMAND "apm" ++# define SLEEP_COMMAND "gnome-power-cmd suspend" + #endif + + #define GSD_MEDIA_KEYS_MANAGER_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), GSD_TYPE_MEDIA_KEYS_MANAGER, GsdMediaKeysManagerPrivate)) Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/02_missing_libs.patch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/02_missing_libs.patch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/02_missing_libs.patch (revision 6565) @@ -0,0 +1,13 @@ +Index: gnome-settings-daemon-2.26.0/configure.ac +=================================================================== +--- gnome-settings-daemon-2.26.0.orig/configure.ac 2009-04-11 13:37:02.222552992 +0200 ++++ gnome-settings-daemon-2.26.0/configure.ac 2009-04-11 13:37:05.694052231 +0200 +@@ -69,6 +69,8 @@ PKG_CHECK_MODULES(SETTINGS_PLUGIN, + gio-2.0 >= $GIO_REQUIRED_VERSION + libglade-2.0 >= 2.0.0 + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + ) + + GSD_PLUGIN_LDFLAGS="-export_dynamic -module -avoid-version -no-undefined" Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/30_pkgconfig-path.patch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/30_pkgconfig-path.patch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/30_pkgconfig-path.patch (revision 6565) @@ -0,0 +1,11 @@ +--- gnome-settings-daemon/data/gnome-settings-daemon.pc.in.orig 2007-11-03 02:19:59.340704956 +0100 ++++ gnome-settings-daemon/data/gnome-settings-daemon.pc.in 2007-11-03 02:20:30.994508804 +0100 +@@ -2,6 +2,8 @@ + exec_prefix=@exec_prefix@ + libdir=@libdir@ + includedir=@includedir@ ++libexecdir=@libexecdir@ ++binary=${libexecdir}/gnome-settings-daemon + + Name: gnome-settings-daemon + Description: Utility library for accessing gnome-settings-daemon over DBUS Index: pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/70_relibtoolize.patch =================================================================== --- pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/70_relibtoolize.patch (revision 6565) +++ pkg/tags/gnome-settings-daemon-2.28.2-parsix1/debian/patches/70_relibtoolize.patch (revision 6565) @@ -0,0 +1,35752 @@ +libtoolize --force --copy +aclocal +automake -acf -Wno-portability +autoheader +autoconf +rm -rf autom4te.cache/ config.h.in~ + +diff -urN gnome-settings-daemon-2.28.2//aclocal.m4 gnome-settings-daemon-2.28.2.new//aclocal.m4 +--- gnome-settings-daemon-2.28.2//aclocal.m4 2010-03-10 03:49:26.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//aclocal.m4 2010-04-21 19:02:47.062622079 -0700 +@@ -1,7 +1,7 @@ +-# generated automatically by aclocal 1.11.1 -*- Autoconf -*- ++# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. ++# 2005 Free Software Foundation, Inc. + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -11,4681 +11,4542 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +-m4_ifndef([AC_AUTOCONF_VERSION], +- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, +-[m4_warning([this file was generated for autoconf 2.65. +-You have another version of autoconf. It may work, but is not guaranteed to. +-If you have problems, you may need to regenerate the build system entirely. +-To do so, use the procedure documented by the package, typically `autoreconf'.])]) ++dnl AM_GCONF_SOURCE_2 ++dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas ++dnl (i.e. pass to gconftool-2 ++dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where ++dnl you should install foo.schemas files ++dnl + +-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ++AC_DEFUN([AM_GCONF_SOURCE_2], ++[ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi ++ ++ AC_ARG_WITH([gconf-source], ++ AC_HELP_STRING([--with-gconf-source=sourceaddress], ++ [Config database for installing schema files.]), ++ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) ++ ++ AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) ++ AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) ++ ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ AC_ARG_WITH([gconf-schema-file-dir], ++ AC_HELP_STRING([--with-gconf-schema-file-dir=dir], ++ [Directory for installing schema files.]), ++ [GCONF_SCHEMA_FILE_DIR="$withval"],) ++ ++ AC_SUBST(GCONF_SCHEMA_FILE_DIR) ++ AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++ ++ AC_ARG_ENABLE(schemas-install, ++ AC_HELP_STRING([--disable-schemas-install], ++ [Disable the schemas installation]), ++ [case ${enableval} in ++ yes|no) ;; ++ *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-install]) ;; ++ esac]) ++ AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++]) ++ ++# Copyright (C) 1995-2002 Free Software Foundation, Inc. ++# Copyright (C) 2001-2003,2004 Red Hat, Inc. + # +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008 Free Software Foundation, Inc. +-# Written by Gordon Matzigkeit, 1996 ++# This file is free software, distributed under the terms of the GNU ++# General Public License. As a special exception to the GNU General ++# Public License, this file may be distributed as part of a program ++# that contains a configuration script generated by Autoconf, under ++# the same distribution terms as the rest of that program. + # +-# This file is free software; the Free Software Foundation gives +-# unlimited permission to copy and/or distribute it, with or without +-# modifications, as long as this notice is preserved. +- +-m4_define([_LT_COPYING], [dnl +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +-# 2006, 2007, 2008 Free Software Foundation, Inc. +-# Written by Gordon Matzigkeit, 1996 ++# This file can be copied and used freely without restrictions. It can ++# be used in projects which are not available under the GNU Public License ++# but which still want to provide support for the GNU gettext functionality. + # +-# This file is part of GNU Libtool. ++# Macro to add for using GNU gettext. ++# Ulrich Drepper , 1995, 1996 + # +-# GNU Libtool is free software; you can redistribute it and/or +-# modify it under the terms of the GNU General Public License as +-# published by the Free Software Foundation; either version 2 of +-# the License, or (at your option) any later version. ++# Modified to never use included libintl. ++# Owen Taylor , 12/15/1998 + # +-# As a special exception to the GNU General Public License, +-# if you distribute this file as part of a program or library that +-# is built using GNU Libtool, you may include this file under the +-# same distribution terms that you use for the rest of that program. ++# Major rework to remove unused code ++# Owen Taylor , 12/11/2002 + # +-# GNU Libtool is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. ++# Added better handling of ALL_LINGUAS from GNU gettext version ++# written by Bruno Haible, Owen Taylor 5/30/3002 + # +-# You should have received a copy of the GNU General Public License +-# along with GNU Libtool; see the file COPYING. If not, a copy +-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +-# obtained by writing to the Free Software Foundation, Inc., +-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-]) +- +-# serial 56 LT_INIT +- ++# Modified to require ngettext ++# Matthias Clasen 08/06/2004 ++# ++# We need this here as well, since someone might use autoconf-2.5x ++# to configure GLib then an older version to configure a package ++# using AM_GLIB_GNU_GETTEXT ++AC_PREREQ(2.53) + +-# LT_PREREQ(VERSION) +-# ------------------ +-# Complain and exit if this libtool version is less that VERSION. +-m4_defun([LT_PREREQ], +-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, +- [m4_default([$3], +- [m4_fatal([Libtool version $1 or higher is required], +- 63)])], +- [$2])]) ++dnl ++dnl We go to great lengths to make sure that aclocal won't ++dnl try to pull in the installed version of these macros ++dnl when running aclocal in the glib directory. ++dnl ++m4_copy([AC_DEFUN],[glib_DEFUN]) ++m4_copy([AC_REQUIRE],[glib_REQUIRE]) ++dnl ++dnl At the end, if we're not within glib, we'll define the public ++dnl definitions in terms of our private definitions. ++dnl + ++# GLIB_LC_MESSAGES ++#-------------------- ++glib_DEFUN([GLIB_LC_MESSAGES], ++ [AC_CHECK_HEADERS([locale.h]) ++ if test $ac_cv_header_locale_h = yes; then ++ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, ++ [AC_TRY_LINK([#include ], [return LC_MESSAGES], ++ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) ++ if test $am_cv_val_LC_MESSAGES = yes; then ++ AC_DEFINE(HAVE_LC_MESSAGES, 1, ++ [Define if your file defines LC_MESSAGES.]) ++ fi ++ fi]) + +-# _LT_CHECK_BUILDDIR +-# ------------------ +-# Complain if the absolute build directory name contains unusual characters +-m4_defun([_LT_CHECK_BUILDDIR], +-[case `pwd` in +- *\ * | *\ *) +- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +-esac ++# GLIB_PATH_PROG_WITH_TEST ++#---------------------------- ++dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, ++dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) ++glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], ++[# Extract the first word of "$2", so it can be a program name with args. ++set dummy $2; ac_word=[$]2 ++AC_MSG_CHECKING([for $ac_word]) ++AC_CACHE_VAL(ac_cv_path_$1, ++[case "[$]$1" in ++ /*) ++ ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in ifelse([$5], , $PATH, [$5]); do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if [$3]; then ++ ac_cv_path_$1="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++dnl If no 4th arg is given, leave the cache variable unset, ++dnl so AC_PATH_PROGS will keep looking. ++ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ++])dnl ++ ;; ++esac])dnl ++$1="$ac_cv_path_$1" ++if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then ++ AC_MSG_RESULT([$]$1) ++else ++ AC_MSG_RESULT(no) ++fi ++AC_SUBST($1)dnl + ]) + ++# GLIB_WITH_NLS ++#----------------- ++glib_DEFUN([GLIB_WITH_NLS], ++ dnl NLS is obligatory ++ [USE_NLS=yes ++ AC_SUBST(USE_NLS) + +-# LT_INIT([OPTIONS]) +-# ------------------ +-AC_DEFUN([LT_INIT], +-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +-AC_BEFORE([$0], [LT_LANG])dnl +-AC_BEFORE([$0], [LT_OUTPUT])dnl +-AC_BEFORE([$0], [LTDL_INIT])dnl +-m4_require([_LT_CHECK_BUILDDIR])dnl +- +-dnl Autoconf doesn't catch unexpanded LT_ macros by default: +-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +-dnl unless we require an AC_DEFUNed macro: +-AC_REQUIRE([LTOPTIONS_VERSION])dnl +-AC_REQUIRE([LTSUGAR_VERSION])dnl +-AC_REQUIRE([LTVERSION_VERSION])dnl +-AC_REQUIRE([LTOBSOLETE_VERSION])dnl +-m4_require([_LT_PROG_LTMAIN])dnl +- +-dnl Parse OPTIONS +-_LT_SET_OPTIONS([$0], [$1]) +- +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ltmain" ++ gt_cv_have_gettext=no + +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' +-AC_SUBST(LIBTOOL)dnl ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= + +-_LT_SETUP ++ AC_CHECK_HEADER(libintl.h, ++ [gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" + +-# Only expand once: +-m4_define([LT_INIT]) +-])# LT_INIT ++ # ++ # First check in libc ++ # ++ AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, ++ [AC_TRY_LINK([ ++#include ++], ++ [return !ngettext ("","", 1)], ++ gt_cv_func_ngettext_libc=yes, ++ gt_cv_func_ngettext_libc=no) ++ ]) ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, ++ [AC_TRY_LINK([ ++#include ++], ++ [return !dgettext ("","")], ++ gt_cv_func_dgettext_libc=yes, ++ gt_cv_func_dgettext_libc=no) ++ ]) ++ fi ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ AC_CHECK_FUNCS(bind_textdomain_codeset) ++ fi + +-# Old names: +-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +-dnl AC_DEFUN([AM_PROG_LIBTOOL], []) +- +- +-# _LT_CC_BASENAME(CC) +-# ------------------- +-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +-m4_defun([_LT_CC_BASENAME], +-[for cc_temp in $1""; do +- case $cc_temp in +- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; +- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +-]) ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ AC_CHECK_LIB(intl, bindtextdomain, ++ [AC_CHECK_LIB(intl, ngettext, ++ [AC_CHECK_LIB(intl, dgettext, ++ gt_cv_func_dgettext_libintl=yes)])]) + ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ AC_MSG_CHECKING([if -liconv is needed to use gettext]) ++ AC_MSG_RESULT([]) ++ AC_CHECK_LIB(intl, ngettext, ++ [AC_CHECK_LIB(intl, dcgettext, ++ [gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv], ++ :,-liconv)], ++ :,-liconv) ++ fi + +-# _LT_FILEUTILS_DEFAULTS +-# ---------------------- +-# It is okay to use these file commands and assume they have been set +-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +-m4_defun([_LT_FILEUTILS_DEFAULTS], +-[: ${CP="cp -f"} +-: ${MV="mv -f"} +-: ${RM="rm -f"} +-])# _LT_FILEUTILS_DEFAULTS ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ AC_CHECK_FUNCS(bind_textdomain_codeset) ++ LIBS="$glib_save_LIBS" + ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi + +-# _LT_SETUP +-# --------- +-m4_defun([_LT_SETUP], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-_LT_DECL([], [host_alias], [0], [The host system])dnl +-_LT_DECL([], [host], [0])dnl +-_LT_DECL([], [host_os], [0])dnl +-dnl +-_LT_DECL([], [build_alias], [0], [The build system])dnl +-_LT_DECL([], [build], [0])dnl +-_LT_DECL([], [build_os], [0])dnl +-dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([LT_PATH_LD])dnl +-AC_REQUIRE([LT_PATH_NM])dnl +-dnl +-AC_REQUIRE([AC_PROG_LN_S])dnl +-test -z "$LN_S" && LN_S="ln -s" +-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +-dnl +-AC_REQUIRE([LT_CMD_MAX_LEN])dnl +-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +-dnl +-m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_CHECK_SHELL_FEATURES])dnl +-m4_require([_LT_CMD_RELOAD])dnl +-m4_require([_LT_CHECK_MAGIC_METHOD])dnl +-m4_require([_LT_CMD_OLD_ARCHIVE])dnl +-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi ++ ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ AC_DEFINE(HAVE_GETTEXT,1, ++ [Define if the GNU gettext() function is already present or preinstalled.]) ++ GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, ++ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ AC_CHECK_FUNCS(dcgettext) ++ MSGFMT_OPTS= ++ AC_MSG_CHECKING([if msgfmt accepts -c]) ++ GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) ++ AC_SUBST(MSGFMT_OPTS) ++ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) ++ GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, ++ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) ++ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr], ++ [CATOBJEXT=.gmo ++ DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share and ++ dnl and CATOBJEXT=.gmo in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [CATOBJEXT=.gmo ++ DATADIRNAME=share], ++ [CATOBJEXT=.mo ++ DATADIRNAME=lib]) ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac]) ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ]) + +-_LT_CONFIG_LIBTOOL_INIT([ +-# See if we are running on zsh, and set the options which allow our +-# commands through without removal of \ escapes INIT. +-if test -n "\${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +-fi +-]) +-if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +-fi ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ AC_DEFINE(ENABLE_NLS, 1, ++ [always defined to indicate that i18n is enabled]) ++ fi + +-_LT_CHECK_OBJDIR ++ dnl Test whether we really found GNU xgettext. ++ if test "$XGETTEXT" != ":"; then ++ dnl If it is not GNU xgettext we define it as : so that the ++ dnl Makefiles still can work. ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ AC_MSG_RESULT( ++ [found xgettext program is not GNU xgettext; ignore it]) ++ XGETTEXT=":" ++ fi ++ fi + +-m4_require([_LT_TAG_COMPILER])dnl +-_LT_PROG_ECHO_BACKSLASH ++ # We need to process the po/ directory. ++ POSUB=po + +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +- fi +- ;; +-esac ++ AC_OUTPUT_COMMANDS( ++ [case "$CONFIG_FILES" in *po/Makefile.in*) ++ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile ++ esac]) + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' ++ dnl These rules are solely for the distribution goal. While doing this ++ dnl we only have to keep exactly one list of the available catalogs ++ dnl in configure.in. ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done + +-# Same as above, but do not quote variable references. +-double_quote_subst='s/\([["`\\]]\)/\\\1/g' ++ dnl Make all variables we use known to autoconf. ++ AC_SUBST(CATALOGS) ++ AC_SUBST(CATOBJEXT) ++ AC_SUBST(DATADIRNAME) ++ AC_SUBST(GMOFILES) ++ AC_SUBST(INSTOBJEXT) ++ AC_SUBST(INTLLIBS) ++ AC_SUBST(PO_IN_DATADIR_TRUE) ++ AC_SUBST(PO_IN_DATADIR_FALSE) ++ AC_SUBST(POFILES) ++ AC_SUBST(POSUB) ++ ]) + +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++# AM_GLIB_GNU_GETTEXT ++# ------------------- ++# Do checks necessary for use of gettext. If a suitable implementation ++# of gettext is found in either in libintl or in the C library, ++# it will set INTLLIBS to the libraries needed for use of gettext ++# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable ++# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() ++# on various variables needed by the Makefile.in.in installed by ++# glib-gettextize. ++dnl ++glib_DEFUN([GLIB_GNU_GETTEXT], ++ [AC_REQUIRE([AC_PROG_CC])dnl ++ AC_REQUIRE([AC_HEADER_STDC])dnl ++ ++ GLIB_LC_MESSAGES ++ GLIB_WITH_NLS + +-# Sed substitution to delay expansion of an escaped single quote. +-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' +- +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' +- +-# Global variables: +-ofile=libtool +-can_build_shared=yes +- +-# All known linkers require a `.a' archive for static linking (except MSVC, +-# which needs '.lib'). +-libext=a ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ AC_MSG_CHECKING(for catalogs to be installed) ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ AC_MSG_RESULT($LINGUAS) ++ fi + +-with_gnu_ld="$lt_cv_prog_gnu_ld" ++ dnl Construct list of names of catalog files to be constructed. ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi + +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" ++ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly ++ dnl find the mkinstalldirs script in another subdir but ($top_srcdir). ++ dnl Try to locate is. ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ AC_SUBST(MKINSTALLDIRS) + +-# Set sane defaults for various variables +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +-test -z "$LD" && LD=ld +-test -z "$ac_objext" && ac_objext=o ++ dnl Generate list of files to be processed by xgettext which will ++ dnl be included in po/Makefile. ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ]) + +-_LT_CC_BASENAME([$compiler]) ++# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) ++# ------------------------------- ++# Define VARIABLE to the location where catalog files will ++# be installed by po/Makefile. ++glib_DEFUN([GLIB_DEFINE_LOCALEDIR], ++[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl ++glib_save_prefix="$prefix" ++glib_save_exec_prefix="$exec_prefix" ++glib_save_datarootdir="$datarootdir" ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++test "x$exec_prefix" = xNONE && exec_prefix=$prefix ++datarootdir=`eval echo "${datarootdir}"` ++if test "x$CATOBJEXT" = "x.mo" ; then ++ localedir=`eval echo "${libdir}/locale"` ++else ++ localedir=`eval echo "${datadir}/locale"` ++fi ++prefix="$glib_save_prefix" ++exec_prefix="$glib_save_exec_prefix" ++datarootdir="$glib_save_datarootdir" ++AC_DEFINE_UNQUOTED($1, "$localedir", ++ [Define the location where the catalogs will be installed]) ++]) + +-# Only perform the check for file, if the check method requires it +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- _LT_PATH_MAGIC +- fi +- ;; +-esac ++dnl ++dnl Now the definitions that aclocal will find ++dnl ++ifdef(glib_configure_in,[],[ ++AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) ++AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ++])dnl + +-# Use C for the default configuration in the libtool script +-LT_SUPPORTED_TAG([CC]) +-_LT_LANG_C_CONFIG +-_LT_LANG_DEFAULT_CONFIG +-_LT_CONFIG_COMMANDS +-])# _LT_SETUP ++# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) ++# ++# Create a temporary file with TEST-FILE as its contents and pass the ++# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with ++# 0 and perform ACTION-IF-FAIL for any other exit status. ++AC_DEFUN([GLIB_RUN_PROG], ++[cat >conftest.foo <<_ACEOF ++$2 ++_ACEOF ++if AC_RUN_LOG([$1 conftest.foo]); then ++ m4_ifval([$3], [$3], [:]) ++m4_ifvaln([$4], [else $4])dnl ++echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD ++sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD ++fi]) + + +-# _LT_PROG_LTMAIN +-# --------------- +-# Note that this code is called both from `configure', and `config.status' +-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +-# `config.status' has no value for ac_aux_dir unless we are using Automake, +-# so we pass a copy along to make sure it has a sensible value anyway. +-m4_defun([_LT_PROG_LTMAIN], +-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +-ltmain="$ac_aux_dir/ltmain.sh" +-])# _LT_PROG_LTMAIN + ++dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) ++# serial 40 IT_PROG_INTLTOOL ++AC_DEFUN([IT_PROG_INTLTOOL], [ ++AC_PREREQ([2.50])dnl ++AC_REQUIRE([AM_NLS])dnl + ++case "$am__api_version" in ++ 1.[01234]) ++ AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ++ ;; ++ *) ++ ;; ++esac + +-# So that we can recreate a full libtool script including additional +-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +-# in macros and then make a single call at the end using the `libtool' +-# label. ++if test -n "$1"; then ++ AC_MSG_CHECKING([for intltool >= $1]) + ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` ++ [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ ] ++ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) ++fi + +-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +-# ---------------------------------------- +-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +-m4_define([_LT_CONFIG_LIBTOOL_INIT], +-[m4_ifval([$1], +- [m4_append([_LT_OUTPUT_LIBTOOL_INIT], +- [$1 +-])])]) ++AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) ++AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) ++AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) ++if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then ++ AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) ++fi + +-# Initialize. +-m4_define([_LT_OUTPUT_LIBTOOL_INIT]) ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' + ++_IT_SUBST(INTLTOOL_DESKTOP_RULE) ++_IT_SUBST(INTLTOOL_DIRECTORY_RULE) ++_IT_SUBST(INTLTOOL_KEYS_RULE) ++_IT_SUBST(INTLTOOL_PROP_RULE) ++_IT_SUBST(INTLTOOL_OAF_RULE) ++_IT_SUBST(INTLTOOL_PONG_RULE) ++_IT_SUBST(INTLTOOL_SERVER_RULE) ++_IT_SUBST(INTLTOOL_SHEET_RULE) ++_IT_SUBST(INTLTOOL_SOUNDLIST_RULE) ++_IT_SUBST(INTLTOOL_UI_RULE) ++_IT_SUBST(INTLTOOL_XAM_RULE) ++_IT_SUBST(INTLTOOL_KBD_RULE) ++_IT_SUBST(INTLTOOL_XML_RULE) ++_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) ++_IT_SUBST(INTLTOOL_CAVES_RULE) ++_IT_SUBST(INTLTOOL_SCHEMAS_RULE) ++_IT_SUBST(INTLTOOL_THEME_RULE) ++_IT_SUBST(INTLTOOL_SERVICE_RULE) ++_IT_SUBST(INTLTOOL_POLICY_RULE) + +-# _LT_CONFIG_LIBTOOL([COMMANDS]) +-# ------------------------------ +-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +-m4_define([_LT_CONFIG_LIBTOOL], +-[m4_ifval([$1], +- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], +- [$1 +-])])]) ++# Check the gettext tools to make sure they are GNU ++AC_PATH_PROG(XGETTEXT, xgettext) ++AC_PATH_PROG(MSGMERGE, msgmerge) ++AC_PATH_PROG(MSGFMT, msgfmt) ++AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi + +-# Initialize. +-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) ++AC_PATH_PROG(INTLTOOL_PERL, perl) ++if test -z "$INTLTOOL_PERL"; then ++ AC_MSG_ERROR([perl not found]) ++fi ++AC_MSG_CHECKING([for perl >= 5.8.1]) ++$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 ++if test $? -ne 0; then ++ AC_MSG_ERROR([perl 5.8.1 is required for intltool]) ++else ++ IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" ++ AC_MSG_RESULT([$IT_PERL_VERSION]) ++fi ++if test "x$2" != "xno-xml"; then ++ AC_MSG_CHECKING([for XML::Parser]) ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ AC_MSG_RESULT([ok]) ++ else ++ AC_MSG_ERROR([XML::Parser perl module is required for intltool]) ++ fi ++fi + ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++AC_SUBST(ALL_LINGUAS) ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM([[]], ++ [[extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr]])], ++ [DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share ++ dnl in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [DATADIRNAME=share], [DATADIRNAME=lib]) ++ ;; ++ *) ++ [DATADIRNAME=lib] ++ ;; ++ esac]) ++fi ++AC_SUBST(DATADIRNAME) ++ ++IT_PO_SUBDIR([po]) + +-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +-# ----------------------------------------------------- +-m4_defun([_LT_CONFIG_SAVE_COMMANDS], +-[_LT_CONFIG_LIBTOOL([$1]) +-_LT_CONFIG_LIBTOOL_INIT([$2]) + ]) + + +-# _LT_FORMAT_COMMENT([COMMENT]) +-# ----------------------------- +-# Add leading comment marks to the start of each line, and a trailing +-# full-stop to the whole comment if one is not present already. +-m4_define([_LT_FORMAT_COMMENT], +-[m4_ifval([$1], [ +-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], +- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +-)]) ++# IT_PO_SUBDIR(DIRNAME) ++# --------------------- ++# All po subdirs have to be declared with this macro; the subdir "po" is ++# declared by IT_PROG_INTLTOOL. ++# ++AC_DEFUN([IT_PO_SUBDIR], ++[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. ++dnl ++dnl The following CONFIG_COMMANDS should be exetuted at the very end ++dnl of config.status. ++AC_CONFIG_COMMANDS_PRE([ ++ AC_CONFIG_COMMANDS([$1/stamp-it], [ ++ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then ++ AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) ++ fi ++ rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" ++ >"$1/stamp-it.tmp" ++ [sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ++ ] ++ [sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r $1/POTFILES ++ } ++ ' "$1/Makefile.in" >"$1/Makefile"] ++ rm -f "$1/Makefile.tmp" ++ mv "$1/stamp-it.tmp" "$1/stamp-it" ++ ]) ++])dnl ++]) + ++# _IT_SUBST(VARIABLE) ++# ------------------- ++# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST ++# ++AC_DEFUN([_IT_SUBST], ++[ ++AC_SUBST([$1]) ++m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ++] ++) + ++# deprecated macros ++AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) ++# A hint is needed for aclocal from Automake <= 1.9.4: ++# AC_DEFUN([AC_PROG_INTLTOOL], ...) + + ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. + +-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +-# ------------------------------------------------------------------- +-# CONFIGNAME is the name given to the value in the libtool script. +-# VARNAME is the (base) name used in the configure script. +-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +-# VARNAME. Any other value will be used directly. +-m4_define([_LT_DECL], +-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], +- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], +- [m4_ifval([$1], [$1], [$2])]) +- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) +- m4_ifval([$4], +- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) +- lt_dict_add_subkey([lt_decl_dict], [$2], +- [tagged?], [m4_ifval([$5], [yes], [no])])]) ++m4_define([_LT_COPYING], [dnl ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + ]) + +- +-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +-# -------------------------------------------------------- +-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) ++# serial 56 LT_INIT + + +-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +-# ------------------------------------------------ +-m4_define([lt_decl_tag_varnames], +-[_lt_decl_filter([tagged?], [yes], $@)]) ++# LT_PREREQ(VERSION) ++# ------------------ ++# Complain and exit if this libtool version is less that VERSION. ++m4_defun([LT_PREREQ], ++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, ++ [m4_default([$3], ++ [m4_fatal([Libtool version $1 or higher is required], ++ 63)])], ++ [$2])]) + + +-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +-# --------------------------------------------------------- +-m4_define([_lt_decl_filter], +-[m4_case([$#], +- [0], [m4_fatal([$0: too few arguments: $#])], +- [1], [m4_fatal([$0: too few arguments: $#: $1])], +- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], +- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], +- [lt_dict_filter([lt_decl_dict], $@)])[]dnl ++# _LT_CHECK_BUILDDIR ++# ------------------ ++# Complain if the absolute build directory name contains unusual characters ++m4_defun([_LT_CHECK_BUILDDIR], ++[case `pwd` in ++ *\ * | *\ *) ++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; ++esac + ]) + + +-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +-# -------------------------------------------------- +-m4_define([lt_decl_quote_varnames], +-[_lt_decl_filter([value], [1], $@)]) ++# LT_INIT([OPTIONS]) ++# ------------------ ++AC_DEFUN([LT_INIT], ++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl + ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl + +-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +-# --------------------------------------------------- +-m4_define([lt_decl_dquote_varnames], +-[_lt_decl_filter([value], [2], $@)]) ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) + ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" + +-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +-# --------------------------------------------------- +-m4_define([lt_decl_varnames_tagged], +-[m4_assert([$# <= 2])dnl +-_$0(m4_quote(m4_default([$1], [[, ]])), +- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), +- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +-m4_define([_lt_decl_varnames_tagged], +-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl + ++_LT_SETUP + +-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +-# ------------------------------------------------ +-m4_define([lt_decl_all_varnames], +-[_$0(m4_quote(m4_default([$1], [[, ]])), +- m4_if([$2], [], +- m4_quote(lt_decl_varnames), +- m4_quote(m4_shift($@))))[]dnl +-]) +-m4_define([_lt_decl_all_varnames], +-[lt_join($@, lt_decl_varnames_tagged([$1], +- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +-]) ++# Only expand once: ++m4_define([LT_INIT]) ++])# LT_INIT + ++# Old names: ++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) ++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PROG_LIBTOOL], []) ++dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + +-# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +-# ------------------------------------ +-# Quote a variable value, and forward it to `config.status' so that its +-# declaration there will have the same value as in `configure'. VARNAME +-# must have a single quote delimited value for this to work. +-m4_define([_LT_CONFIG_STATUS_DECLARE], +-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) + ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++m4_defun([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) + +-# _LT_CONFIG_STATUS_DECLARATIONS +-# ------------------------------ +-# We delimit libtool config variables with single quotes, so when +-# we write them to config.status, we have to be sure to quote all +-# embedded single quotes properly. In configure, this macro expands +-# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +-# +-# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' +-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), +- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + ++# _LT_FILEUTILS_DEFAULTS ++# ---------------------- ++# It is okay to use these file commands and assume they have been set ++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. ++m4_defun([_LT_FILEUTILS_DEFAULTS], ++[: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++])# _LT_FILEUTILS_DEFAULTS + +-# _LT_LIBTOOL_TAGS +-# ---------------- +-# Output comment and list of tags supported by the script +-m4_defun([_LT_LIBTOOL_TAGS], +-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +-available_tags="_LT_TAGS"dnl +-]) + ++# _LT_SETUP ++# --------- ++m4_defun([_LT_SETUP], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++_LT_DECL([], [host_alias], [0], [The host system])dnl ++_LT_DECL([], [host], [0])dnl ++_LT_DECL([], [host_os], [0])dnl ++dnl ++_LT_DECL([], [build_alias], [0], [The build system])dnl ++_LT_DECL([], [build], [0])dnl ++_LT_DECL([], [build_os], [0])dnl ++dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++dnl ++AC_REQUIRE([AC_PROG_LN_S])dnl ++test -z "$LN_S" && LN_S="ln -s" ++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl ++dnl ++AC_REQUIRE([LT_CMD_MAX_LEN])dnl ++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl ++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl ++dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_CHECK_SHELL_FEATURES])dnl ++m4_require([_LT_CMD_RELOAD])dnl ++m4_require([_LT_CHECK_MAGIC_METHOD])dnl ++m4_require([_LT_CMD_OLD_ARCHIVE])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl + +-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +-# ----------------------------------- +-# Extract the dictionary values for VARNAME (optionally with TAG) and +-# expand to a commented shell variable setting: +-# +-# # Some comment about what VAR is for. +-# visible_name=$lt_internal_name +-m4_define([_LT_LIBTOOL_DECLARE], +-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], +- [description])))[]dnl +-m4_pushdef([_libtool_name], +- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), +- [0], [_libtool_name=[$]$1], +- [1], [_libtool_name=$lt_[]$1], +- [2], [_libtool_name=$lt_[]$1], +- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ++_LT_CONFIG_LIBTOOL_INIT([ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi + ]) ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi + ++_LT_CHECK_OBJDIR + +-# _LT_LIBTOOL_CONFIG_VARS +-# ----------------------- +-# Produce commented declarations of non-tagged libtool config variables +-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +-# section) are produced by _LT_LIBTOOL_TAG_VARS. +-m4_defun([_LT_LIBTOOL_CONFIG_VARS], +-[m4_foreach([_lt_var], +- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), +- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) ++m4_require([_LT_TAG_COMPILER])dnl ++_LT_PROG_ECHO_BACKSLASH + ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac + +-# _LT_LIBTOOL_TAG_VARS(TAG) +-# ------------------------- +-m4_define([_LT_LIBTOOL_TAG_VARS], +-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), +- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +-# _LT_TAGVAR(VARNAME, [TAGNAME]) +-# ------------------------------ +-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +-# _LT_CONFIG_COMMANDS +-# ------------------- +-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +-# variables for single and double quote escaping we saved from calls +-# to _LT_DECL, we can put quote escaped variables declarations +-# into `config.status', and then the shell code to quote escape them in +-# for loops in `config.status'. Finally, any additional code accumulated +-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +-m4_defun([_LT_CONFIG_COMMANDS], +-[AC_PROVIDE_IFELSE([LT_OUTPUT], +- dnl If the libtool generation code has been placed in $CONFIG_LT, +- dnl instead of duplicating it all over again into config.status, +- dnl then we will have config.status run $CONFIG_LT later, so it +- dnl needs to know what name is stored there: +- [AC_CONFIG_COMMANDS([libtool], +- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], +- dnl If the libtool generation code is destined for config.status, +- dnl expand the accumulated commands and init code now: +- [AC_CONFIG_COMMANDS([libtool], +- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +-])#_LT_CONFIG_COMMANDS ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + ++# Global variables: ++ofile=libtool ++can_build_shared=yes + +-# Initialize. +-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +-[ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++with_gnu_ld="$lt_cv_prog_gnu_ld" + +-sed_quote_subst='$sed_quote_subst' +-double_quote_subst='$double_quote_subst' +-delay_variable_subst='$delay_variable_subst' +-_LT_CONFIG_STATUS_DECLARATIONS +-LTCC='$LTCC' +-LTCFLAGS='$LTCFLAGS' +-compiler='$compiler_DEFAULT' ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" + +-# Quote evaled strings. +-for var in lt_decl_all_varnames([[ \ +-]], lt_decl_quote_varnames); do +- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in +- *[[\\\\\\\`\\"\\\$]]*) +- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" +- ;; +- *) +- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" +- ;; +- esac +-done ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o + +-# Double-quote double-evaled strings. +-for var in lt_decl_all_varnames([[ \ +-]], lt_decl_dquote_varnames); do +- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in +- *[[\\\\\\\`\\"\\\$]]*) +- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" +- ;; +- *) +- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" +- ;; +- esac +-done ++_LT_CC_BASENAME([$compiler]) + +-# Fix-up fallback echo if it was mangled by the above quoting rules. +-case \$lt_ECHO in +-*'\\\[$]0 --fallback-echo"')dnl " +- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ _LT_PATH_MAGIC ++ fi + ;; + esac + +-_LT_OUTPUT_LIBTOOL_INIT +-]) ++# Use C for the default configuration in the libtool script ++LT_SUPPORTED_TAG([CC]) ++_LT_LANG_C_CONFIG ++_LT_LANG_DEFAULT_CONFIG ++_LT_CONFIG_COMMANDS ++])# _LT_SETUP + + +-# LT_OUTPUT +-# --------- +-# This macro allows early generation of the libtool script (before +-# AC_OUTPUT is called), incase it is used in configure for compilation +-# tests. +-AC_DEFUN([LT_OUTPUT], +-[: ${CONFIG_LT=./config.lt} +-AC_MSG_NOTICE([creating $CONFIG_LT]) +-cat >"$CONFIG_LT" <<_LTEOF +-#! $SHELL +-# Generated by $as_me. +-# Run this file to recreate a libtool stub with the current configuration. ++# _LT_PROG_LTMAIN ++# --------------- ++# Note that this code is called both from `configure', and `config.status' ++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, ++# `config.status' has no value for ac_aux_dir unless we are using Automake, ++# so we pass a copy along to make sure it has a sensible value anyway. ++m4_defun([_LT_PROG_LTMAIN], ++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl ++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ++ltmain="$ac_aux_dir/ltmain.sh" ++])# _LT_PROG_LTMAIN + +-lt_cl_silent=false +-SHELL=\${CONFIG_SHELL-$SHELL} +-_LTEOF + +-cat >>"$CONFIG_LT" <<\_LTEOF +-AS_SHELL_SANITIZE +-_AS_PREPARE + +-exec AS_MESSAGE_FD>&1 +-exec AS_MESSAGE_LOG_FD>>config.log +-{ +- echo +- AS_BOX([Running $as_me.]) +-} >&AS_MESSAGE_LOG_FD ++# So that we can recreate a full libtool script including additional ++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS ++# in macros and then make a single call at the end using the `libtool' ++# label. + +-lt_cl_help="\ +-\`$as_me' creates a local libtool stub from the current configuration, +-for use in further configure time tests before the real libtool is +-generated. + +-Usage: $[0] [[OPTIONS]] ++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) ++# ---------------------------------------- ++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL_INIT], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], ++ [$1 ++])])]) + +- -h, --help print this help, then exit +- -V, --version print version number, then exit +- -q, --quiet do not print progress messages +- -d, --debug don't remove temporary files ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + +-Report bugs to ." + +-lt_cl_version="\ +-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +-configured by $[0], generated by m4_PACKAGE_STRING. ++# _LT_CONFIG_LIBTOOL([COMMANDS]) ++# ------------------------------ ++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], ++ [$1 ++])])]) + +-Copyright (C) 2008 Free Software Foundation, Inc. +-This config.lt script is free software; the Free Software Foundation +-gives unlimited permision to copy, distribute and modify it." ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + +-while test $[#] != 0 +-do +- case $[1] in +- --version | --v* | -V ) +- echo "$lt_cl_version"; exit 0 ;; +- --help | --h* | -h ) +- echo "$lt_cl_help"; exit 0 ;; +- --debug | --d* | -d ) +- debug=: ;; +- --quiet | --q* | --silent | --s* | -q ) +- lt_cl_silent=: ;; + +- -*) AC_MSG_ERROR([unrecognized option: $[1] +-Try \`$[0] --help' for more information.]) ;; ++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) ++# ----------------------------------------------------- ++m4_defun([_LT_CONFIG_SAVE_COMMANDS], ++[_LT_CONFIG_LIBTOOL([$1]) ++_LT_CONFIG_LIBTOOL_INIT([$2]) ++]) + +- *) AC_MSG_ERROR([unrecognized argument: $[1] +-Try \`$[0] --help' for more information.]) ;; +- esac +- shift +-done + +-if $lt_cl_silent; then +- exec AS_MESSAGE_FD>/dev/null +-fi +-_LTEOF ++# _LT_FORMAT_COMMENT([COMMENT]) ++# ----------------------------- ++# Add leading comment marks to the start of each line, and a trailing ++# full-stop to the whole comment if one is not present already. ++m4_define([_LT_FORMAT_COMMENT], ++[m4_ifval([$1], [ ++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], ++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) ++)]) + +-cat >>"$CONFIG_LT" <<_LTEOF +-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +-_LTEOF + +-cat >>"$CONFIG_LT" <<\_LTEOF +-AC_MSG_NOTICE([creating $ofile]) +-_LT_OUTPUT_LIBTOOL_COMMANDS +-AS_EXIT(0) +-_LTEOF +-chmod +x "$CONFIG_LT" + +-# configure is writing to config.log, but config.lt does its own redirection, +-# appending to config.log, which fails on DOS, as config.log is still kept +-# open by configure. Here we exec the FD to /dev/null, effectively closing +-# config.log, so it can be properly (re)opened and appended to by config.lt. +-if test "$no_create" != yes; then +- lt_cl_success=: +- test "$silent" = yes && +- lt_config_lt_args="$lt_config_lt_args --quiet" +- exec AS_MESSAGE_LOG_FD>/dev/null +- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +- exec AS_MESSAGE_LOG_FD>>config.log +- $lt_cl_success || AS_EXIT(1) +-fi +-])# LT_OUTPUT + + +-# _LT_CONFIG(TAG) +-# --------------- +-# If TAG is the built-in tag, create an initial libtool script with a +-# default configuration from the untagged config vars. Otherwise add code +-# to config.status for appending the configuration named by TAG from the +-# matching tagged config vars. +-m4_defun([_LT_CONFIG], +-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-_LT_CONFIG_SAVE_COMMANDS([ +- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl +- m4_if(_LT_TAG, [C], [ +- # See if we are running on zsh, and set the options which allow our +- # commands through without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi ++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) ++# ------------------------------------------------------------------- ++# CONFIGNAME is the name given to the value in the libtool script. ++# VARNAME is the (base) name used in the configure script. ++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on ++# VARNAME. Any other value will be used directly. ++m4_define([_LT_DECL], ++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], ++ [m4_ifval([$1], [$1], [$2])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) ++ m4_ifval([$4], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], ++ [tagged?], [m4_ifval([$5], [yes], [no])])]) ++]) + +- cfgfile="${ofile}T" +- trap "$RM \"$cfgfile\"; exit 1" 1 2 15 +- $RM "$cfgfile" + +- cat <<_LT_EOF >> "$cfgfile" +-#! $SHELL ++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) ++# -------------------------------------------------------- ++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + +-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-_LT_COPYING +-_LT_LIBTOOL_TAGS + +-# ### BEGIN LIBTOOL CONFIG +-_LT_LIBTOOL_CONFIG_VARS +-_LT_LIBTOOL_TAG_VARS +-# ### END LIBTOOL CONFIG ++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_tag_varnames], ++[_lt_decl_filter([tagged?], [yes], $@)]) + +-_LT_EOF + +- case $host_os in +- aix3*) +- cat <<\_LT_EOF >> "$cfgfile" +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-_LT_EOF +- ;; +- esac ++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) ++# --------------------------------------------------------- ++m4_define([_lt_decl_filter], ++[m4_case([$#], ++ [0], [m4_fatal([$0: too few arguments: $#])], ++ [1], [m4_fatal([$0: too few arguments: $#: $1])], ++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], ++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], ++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl ++]) + +- _LT_PROG_LTMAIN + +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) ++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) ++# -------------------------------------------------- ++m4_define([lt_decl_quote_varnames], ++[_lt_decl_filter([value], [1], $@)]) + +- _LT_PROG_XSI_SHELLFNS + +- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ +- || (rm -f "$cfgfile"; exit 1) ++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_dquote_varnames], ++[_lt_decl_filter([value], [2], $@)]) + +- mv -f "$cfgfile" "$ofile" || +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" +-], +-[cat <<_LT_EOF >> "$ofile" + +-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +-dnl in a comment (ie after a #). +-# ### BEGIN LIBTOOL TAG CONFIG: $1 +-_LT_LIBTOOL_TAG_VARS(_LT_TAG) +-# ### END LIBTOOL TAG CONFIG: $1 +-_LT_EOF +-])dnl /m4_if +-], +-[m4_if([$1], [], [ +- PACKAGE='$PACKAGE' +- VERSION='$VERSION' +- TIMESTAMP='$TIMESTAMP' +- RM='$RM' +- ofile='$ofile'], []) +-])dnl /_LT_CONFIG_SAVE_COMMANDS +-])# _LT_CONFIG ++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_varnames_tagged], ++[m4_assert([$# <= 2])dnl ++_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), ++ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) ++m4_define([_lt_decl_varnames_tagged], ++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +-# LT_SUPPORTED_TAG(TAG) +-# --------------------- +-# Trace this macro to discover what tags are supported by the libtool +-# --tag option, using: +-# autoconf --trace 'LT_SUPPORTED_TAG:$1' +-AC_DEFUN([LT_SUPPORTED_TAG], []) ++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_all_varnames], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_if([$2], [], ++ m4_quote(lt_decl_varnames), ++ m4_quote(m4_shift($@))))[]dnl ++]) ++m4_define([_lt_decl_all_varnames], ++[lt_join($@, lt_decl_varnames_tagged([$1], ++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ++]) + + +-# C support is built-in for now +-m4_define([_LT_LANG_C_enabled], []) +-m4_define([_LT_TAGS], []) ++# _LT_CONFIG_STATUS_DECLARE([VARNAME]) ++# ------------------------------------ ++# Quote a variable value, and forward it to `config.status' so that its ++# declaration there will have the same value as in `configure'. VARNAME ++# must have a single quote delimited value for this to work. ++m4_define([_LT_CONFIG_STATUS_DECLARE], ++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) + + +-# LT_LANG(LANG) +-# ------------- +-# Enable libtool support for the given language if not already enabled. +-AC_DEFUN([LT_LANG], +-[AC_BEFORE([$0], [LT_OUTPUT])dnl +-m4_case([$1], +- [C], [_LT_LANG(C)], +- [C++], [_LT_LANG(CXX)], +- [Java], [_LT_LANG(GCJ)], +- [Fortran 77], [_LT_LANG(F77)], +- [Fortran], [_LT_LANG(FC)], +- [Windows Resource], [_LT_LANG(RC)], +- [m4_ifdef([_LT_LANG_]$1[_CONFIG], +- [_LT_LANG($1)], +- [m4_fatal([$0: unsupported language: "$1"])])])dnl +-])# LT_LANG ++# _LT_CONFIG_STATUS_DECLARATIONS ++# ------------------------------ ++# We delimit libtool config variables with single quotes, so when ++# we write them to config.status, we have to be sure to quote all ++# embedded single quotes properly. In configure, this macro expands ++# each variable declared with _LT_DECL (and _LT_TAGDECL) into: ++# ++# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' ++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), ++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +-# _LT_LANG(LANGNAME) +-# ------------------ +-m4_defun([_LT_LANG], +-[m4_ifdef([_LT_LANG_]$1[_enabled], [], +- [LT_SUPPORTED_TAG([$1])dnl +- m4_append([_LT_TAGS], [$1 ])dnl +- m4_define([_LT_LANG_]$1[_enabled], [])dnl +- _LT_LANG_$1_CONFIG($1)])dnl +-])# _LT_LANG ++# _LT_LIBTOOL_TAGS ++# ---------------- ++# Output comment and list of tags supported by the script ++m4_defun([_LT_LIBTOOL_TAGS], ++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl ++available_tags="_LT_TAGS"dnl ++]) + + +-# _LT_LANG_DEFAULT_CONFIG ++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) ++# ----------------------------------- ++# Extract the dictionary values for VARNAME (optionally with TAG) and ++# expand to a commented shell variable setting: ++# ++# # Some comment about what VAR is for. ++# visible_name=$lt_internal_name ++m4_define([_LT_LIBTOOL_DECLARE], ++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], ++ [description])))[]dnl ++m4_pushdef([_libtool_name], ++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl ++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), ++ [0], [_libtool_name=[$]$1], ++ [1], [_libtool_name=$lt_[]$1], ++ [2], [_libtool_name=$lt_[]$1], ++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl ++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ++]) ++ ++ ++# _LT_LIBTOOL_CONFIG_VARS + # ----------------------- +-m4_defun([_LT_LANG_DEFAULT_CONFIG], +-[AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [LT_LANG(CXX)], +- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) ++# Produce commented declarations of non-tagged libtool config variables ++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' ++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG ++# section) are produced by _LT_LIBTOOL_TAG_VARS. ++m4_defun([_LT_LIBTOOL_CONFIG_VARS], ++[m4_foreach([_lt_var], ++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + +-AC_PROVIDE_IFELSE([AC_PROG_F77], +- [LT_LANG(F77)], +- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +-AC_PROVIDE_IFELSE([AC_PROG_FC], +- [LT_LANG(FC)], +- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) ++# _LT_LIBTOOL_TAG_VARS(TAG) ++# ------------------------- ++m4_define([_LT_LIBTOOL_TAG_VARS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + +-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +-dnl pulling things in needlessly. +-AC_PROVIDE_IFELSE([AC_PROG_GCJ], +- [LT_LANG(GCJ)], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], +- [LT_LANG(GCJ)], +- [AC_PROVIDE_IFELSE([LT_PROG_GCJ], +- [LT_LANG(GCJ)], +- [m4_ifdef([AC_PROG_GCJ], +- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) +- m4_ifdef([A][M_PROG_GCJ], +- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) +- m4_ifdef([LT_PROG_GCJ], +- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +-AC_PROVIDE_IFELSE([LT_PROG_RC], +- [LT_LANG(RC)], +- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +-])# _LT_LANG_DEFAULT_CONFIG ++# _LT_TAGVAR(VARNAME, [TAGNAME]) ++# ------------------------------ ++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + +-# Obsolete macros: +-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +-dnl AC_DEFUN([AC_LIBTOOL_F77], []) +-dnl AC_DEFUN([AC_LIBTOOL_FC], []) +-dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) + ++# _LT_CONFIG_COMMANDS ++# ------------------- ++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of ++# variables for single and double quote escaping we saved from calls ++# to _LT_DECL, we can put quote escaped variables declarations ++# into `config.status', and then the shell code to quote escape them in ++# for loops in `config.status'. Finally, any additional code accumulated ++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. ++m4_defun([_LT_CONFIG_COMMANDS], ++[AC_PROVIDE_IFELSE([LT_OUTPUT], ++ dnl If the libtool generation code has been placed in $CONFIG_LT, ++ dnl instead of duplicating it all over again into config.status, ++ dnl then we will have config.status run $CONFIG_LT later, so it ++ dnl needs to know what name is stored there: ++ [AC_CONFIG_COMMANDS([libtool], ++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], ++ dnl If the libtool generation code is destined for config.status, ++ dnl expand the accumulated commands and init code now: ++ [AC_CONFIG_COMMANDS([libtool], ++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ++])#_LT_CONFIG_COMMANDS + +-# _LT_TAG_COMPILER +-# ---------------- +-m4_defun([_LT_TAG_COMPILER], +-[AC_REQUIRE([AC_PROG_CC])dnl + +-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], ++[ + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++_LT_CONFIG_STATUS_DECLARATIONS ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' + +-# Allow CC to be a program name with arguments. +-compiler=$CC +-])# _LT_TAG_COMPILER ++# Quote evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_quote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done + ++# Double-quote double-evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_dquote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done + +-# _LT_COMPILER_BOILERPLATE +-# ------------------------ +-# Check for compiler boilerplate output or warnings with +-# the simple compiler test code. +-m4_defun([_LT_COMPILER_BOILERPLATE], +-[m4_require([_LT_DECL_SED])dnl +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$RM conftest* +-])# _LT_COMPILER_BOILERPLATE ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\[$]0 --fallback-echo"')dnl " ++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ++ ;; ++esac + ++_LT_OUTPUT_LIBTOOL_INIT ++]) + +-# _LT_LINKER_BOILERPLATE +-# ---------------------- +-# Check for linker boilerplate output or warnings with +-# the simple link test code. +-m4_defun([_LT_LINKER_BOILERPLATE], +-[m4_require([_LT_DECL_SED])dnl +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$RM -r conftest* +-])# _LT_LINKER_BOILERPLATE + +-# _LT_REQUIRED_DARWIN_CHECKS +-# ------------------------- +-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ +- case $host_os in +- rhapsody* | darwin*) +- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) +- AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) +- AC_CHECK_TOOL([LIPO], [lipo], [:]) +- AC_CHECK_TOOL([OTOOL], [otool], [:]) +- AC_CHECK_TOOL([OTOOL64], [otool64], [:]) +- _LT_DECL([], [DSYMUTIL], [1], +- [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) +- _LT_DECL([], [NMEDIT], [1], +- [Tool to change global to local symbols on Mac OS X]) +- _LT_DECL([], [LIPO], [1], +- [Tool to manipulate fat objects and archives on Mac OS X]) +- _LT_DECL([], [OTOOL], [1], +- [ldd/readelf like tool for Mach-O binaries on Mac OS X]) +- _LT_DECL([], [OTOOL64], [1], +- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) ++# LT_OUTPUT ++# --------- ++# This macro allows early generation of the libtool script (before ++# AC_OUTPUT is called), incase it is used in configure for compilation ++# tests. ++AC_DEFUN([LT_OUTPUT], ++[: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. + +- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], +- [lt_cv_apple_cc_single_mod=no +- if test -z "${LT_MULTI_MODULE}"; then +- # By default we will add the -single_module flag. You can override +- # by either setting the environment variable LT_MULTI_MODULE +- # non-empty at configure time, or by adding -multi_module to the +- # link flags. +- rm -rf libconftest.dylib* +- echo "int foo(void){return 1;}" > conftest.c +- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD +- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err +- _lt_result=$? +- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then +- lt_cv_apple_cc_single_mod=yes +- else +- cat conftest.err >&AS_MESSAGE_LOG_FD +- fi +- rm -rf libconftest.dylib* +- rm -f conftest.* +- fi]) +- AC_CACHE_CHECK([for -exported_symbols_list linker flag], +- [lt_cv_ld_exported_symbols_list], +- [lt_cv_ld_exported_symbols_list=no +- save_LDFLAGS=$LDFLAGS +- echo "_main" > conftest.sym +- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" +- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], +- [lt_cv_ld_exported_symbols_list=yes], +- [lt_cv_ld_exported_symbols_list=no]) +- LDFLAGS="$save_LDFLAGS" +- ]) +- case $host_os in +- rhapsody* | darwin1.[[012]]) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; +- darwin1.*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- darwin*) # darwin 5.x on +- # if running on 10.5 or later, the deployment target defaults +- # to the OS version, if on x86, and 10.4, the deployment +- # target defaults to 10.4. Don't you love it? +- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in +- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; +- 10.[[012]]*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- 10.*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; +- esac +- ;; +- esac +- if test "$lt_cv_apple_cc_single_mod" = "yes"; then +- _lt_dar_single_mod='$single_module' +- fi +- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then +- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' +- else +- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- if test "$DSYMUTIL" != ":"; then +- _lt_dsymutil='~$DSYMUTIL $lib || :' +- else +- _lt_dsymutil= +- fi +- ;; +- esac +-]) ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF + ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE + +-# _LT_DARWIN_LINKER_FEATURES +-# -------------------------- +-# Checks for linker and compiler features on darwin +-m4_defun([_LT_DARWIN_LINKER_FEATURES], +-[ +- m4_require([_LT_REQUIRED_DARWIN_CHECKS]) +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_TAGVAR(hardcode_direct, $1)=no +- _LT_TAGVAR(hardcode_automatic, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_TAGVAR(whole_archive_flag_spec, $1)='' +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" +- case $cc_basename in +- ifort*) _lt_dar_can_shared=yes ;; +- *) _lt_dar_can_shared=$GCC ;; +- esac +- if test "$_lt_dar_can_shared" = "yes"; then +- output_verbose_link_cmd=echo +- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- m4_if([$1], [CXX], +-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then +- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" +- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" +- fi +-],[]) +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +-]) ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log ++{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD + +-# _LT_SYS_MODULE_PATH_AIX +-# ----------------------- +-# Links a minimal program and checks the executable +-# for the system default hardcoded library path. In most cases, +-# this is /usr/lib:/lib, but when the MPI compilers are used +-# the location of the communication and MPI libs are included too. +-# If we don't find anything, use the default library path according +-# to the aix ld manual. +-m4_defun([_LT_SYS_MODULE_PATH_AIX], +-[m4_require([_LT_DECL_SED])dnl +-AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi],[]) +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +-])# _LT_SYS_MODULE_PATH_AIX ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. + ++Usage: $[0] [[OPTIONS]] + +-# _LT_SHELL_INIT(ARG) +-# ------------------- +-m4_define([_LT_SHELL_INIT], +-[ifdef([AC_DIVERSION_NOTICE], +- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], +- [AC_DIVERT_PUSH(NOTICE)]) +-$1 +-AC_DIVERT_POP +-])# _LT_SHELL_INIT ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files + ++Report bugs to ." + +-# _LT_PROG_ECHO_BACKSLASH +-# ----------------------- +-# Add some code to the start of the generated configure script which +-# will find an echo command which doesn't interpret backslashes. +-m4_defun([_LT_PROG_ECHO_BACKSLASH], +-[_LT_SHELL_INIT([ +-# Check that we are running under the correct shell. +-SHELL=${CONFIG_SHELL-/bin/sh} ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. + +-case X$lt_ECHO in +-X*--fallback-echo) +- # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` +- ;; +-esac ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." + +-ECHO=${lt_ECHO-echo} +-if test "X[$]1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X[$]1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then +- # Yippee, $ECHO works! +- : +-else +- # Restart under the correct shell. +- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +-fi ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; + +-if test "X[$]1" = X--fallback-echo; then +- # used as fallback echo ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac + shift +- cat <<_LT_EOF +-[$]* +-_LT_EOF +- exit 0 ++done ++ ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null + fi ++_LTEOF + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF + +-if test -z "$lt_ECHO"; then +- if test "X${echo_test_string+set}" != Xset; then +- # find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if { echo_test_string=`eval $cmd`; } 2>/dev/null && +- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null +- then +- break +- fi +- done +- fi ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" + +- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && +- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +- else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) ++fi ++])# LT_OUTPUT + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do +- IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- ECHO="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" + +- if test "X$ECHO" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && +- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- ECHO='print -r' +- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} +- else +- # Try using printf. +- ECHO='printf %s\n' +- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && +- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- ECHO="$CONFIG_SHELL [$]0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- ECHO="$CONFIG_SHELL [$]0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: ++# _LT_CONFIG(TAG) ++# --------------- ++# If TAG is the built-in tag, create an initial libtool script with a ++# default configuration from the untagged config vars. Otherwise add code ++# to config.status for appending the configuration named by TAG from the ++# matching tagged config vars. ++m4_defun([_LT_CONFIG], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_CONFIG_SAVE_COMMANDS([ ++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl ++ m4_if(_LT_TAG, [C], [ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi + +- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do +- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" + +- if test "$prev" != 'sed 50q "[$]0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} +- else +- # Oops. We lost completely, so just stick with echo. +- ECHO=echo +- fi +- fi +- fi +- fi +- fi +-fi ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL + +-# Copy echo and quote the copy suitably for passing to libtool from +-# the Makefile, instead of quoting the original, which is used later. +-lt_ECHO=$ECHO +-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then +- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++_LT_COPYING ++_LT_LIBTOOL_TAGS ++ ++# ### BEGIN LIBTOOL CONFIG ++_LT_LIBTOOL_CONFIG_VARS ++_LT_LIBTOOL_TAG_VARS ++# ### END LIBTOOL CONFIG ++ ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi ++_LT_EOF ++ ;; ++ esac + +-AC_SUBST(lt_ECHO) +-]) +-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +-_LT_DECL([], [ECHO], [1], +- [An echo program that does not interpret backslashes]) +-])# _LT_PROG_ECHO_BACKSLASH ++ _LT_PROG_LTMAIN + ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-# _LT_ENABLE_LOCK +-# --------------- +-m4_defun([_LT_ENABLE_LOCK], +-[AC_ARG_ENABLE([libtool-lock], +- [AS_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ _LT_PROG_XSI_SHELLFNS + +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '[#]line __oline__ "configure"' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- fi +- rm -rf conftest* +- ;; ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +-s390*-*linux*|s390*-*tpf*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.o` in +- *32-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_i386_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_x86_64_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*|s390*-*tpf*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++], ++[cat <<_LT_EOF >> "$ofile" + +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, +- [AC_LANG_PUSH(C) +- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) +- AC_LANG_POP]) +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; +-sparc*-*solaris*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if AC_TRY_EVAL(ac_compile); then +- case `/usr/bin/file conftest.o` in +- *64-bit*) +- case $lt_cv_prog_gnu_ld in +- yes*) LD="${LD-ld} -m elf64_sparc" ;; +- *) +- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then +- LD="${LD-ld} -64" +- fi +- ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +-esac ++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded ++dnl in a comment (ie after a #). ++# ### BEGIN LIBTOOL TAG CONFIG: $1 ++_LT_LIBTOOL_TAG_VARS(_LT_TAG) ++# ### END LIBTOOL TAG CONFIG: $1 ++_LT_EOF ++])dnl /m4_if ++], ++[m4_if([$1], [], [ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile'], []) ++])dnl /_LT_CONFIG_SAVE_COMMANDS ++])# _LT_CONFIG + +-need_locks="$enable_libtool_lock" +-])# _LT_ENABLE_LOCK + ++# LT_SUPPORTED_TAG(TAG) ++# --------------------- ++# Trace this macro to discover what tags are supported by the libtool ++# --tag option, using: ++# autoconf --trace 'LT_SUPPORTED_TAG:$1' ++AC_DEFUN([LT_SUPPORTED_TAG], []) + +-# _LT_CMD_OLD_ARCHIVE +-# ------------------- +-m4_defun([_LT_CMD_OLD_ARCHIVE], +-[AC_CHECK_TOOL(AR, ar, false) +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-_LT_DECL([], [AR], [1], [The archiver]) +-_LT_DECL([], [AR_FLAGS], [1]) + +-AC_CHECK_TOOL(STRIP, strip, :) +-test -z "$STRIP" && STRIP=: +-_LT_DECL([], [STRIP], [1], [A symbol stripping program]) ++# C support is built-in for now ++m4_define([_LT_LANG_C_enabled], []) ++m4_define([_LT_TAGS], []) + +-AC_CHECK_TOOL(RANLIB, ranlib, :) +-test -z "$RANLIB" && RANLIB=: +-_LT_DECL([], [RANLIB], [1], +- [Commands used to install an old-style archive]) + +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= ++# LT_LANG(LANG) ++# ------------- ++# Enable libtool support for the given language if not already enabled. ++AC_DEFUN([LT_LANG], ++[AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++])# LT_LANG + +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" +- ;; +- *) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +-fi +-_LT_DECL([], [old_postinstall_cmds], [2]) +-_LT_DECL([], [old_postuninstall_cmds], [2]) +-_LT_TAGDECL([], [old_archive_cmds], [2], +- [Commands used to build an old-style archive]) +-])# _LT_CMD_OLD_ARCHIVE + ++# _LT_LANG(LANGNAME) ++# ------------------ ++m4_defun([_LT_LANG], ++[m4_ifdef([_LT_LANG_]$1[_enabled], [], ++ [LT_SUPPORTED_TAG([$1])dnl ++ m4_append([_LT_TAGS], [$1 ])dnl ++ m4_define([_LT_LANG_]$1[_enabled], [])dnl ++ _LT_LANG_$1_CONFIG($1)])dnl ++])# _LT_LANG + +-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ---------------------------------------------------------------- +-# Check whether the given compiler option works +-AC_DEFUN([_LT_COMPILER_OPTION], +-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_DECL_SED])dnl +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$3" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- $2=yes +- fi +- fi +- $RM conftest* +-]) + +-if test x"[$]$2" = xyes; then +- m4_if([$5], , :, [$5]) +-else +- m4_if([$6], , :, [$6]) +-fi +-])# _LT_COMPILER_OPTION ++# _LT_LANG_DEFAULT_CONFIG ++# ----------------------- ++m4_defun([_LT_LANG_DEFAULT_CONFIG], ++[AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [LT_LANG(CXX)], ++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +-# Old name: +-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) ++AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [LT_LANG(F77)], ++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_FC], ++ [LT_LANG(FC)], ++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) ++ ++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal ++dnl pulling things in needlessly. ++AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [m4_ifdef([AC_PROG_GCJ], ++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([A][M_PROG_GCJ], ++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([LT_PROG_GCJ], ++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) ++ ++AC_PROVIDE_IFELSE([LT_PROG_RC], ++ [LT_LANG(RC)], ++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ++])# _LT_LANG_DEFAULT_CONFIG ++ ++# Obsolete macros: ++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) + dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) ++dnl AC_DEFUN([AC_LIBTOOL_CXX], []) ++dnl AC_DEFUN([AC_LIBTOOL_F77], []) ++dnl AC_DEFUN([AC_LIBTOOL_FC], []) ++dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) + + +-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ---------------------------------------------------- +-# Check whether the given linker option works +-AC_DEFUN([_LT_LINKER_OPTION], +-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_DECL_SED])dnl +-AC_CACHE_CHECK([$1], [$2], +- [$2=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $3" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&AS_MESSAGE_LOG_FD +- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- $2=yes +- fi +- else +- $2=yes +- fi +- fi +- $RM -r conftest* +- LDFLAGS="$save_LDFLAGS" +-]) +- +-if test x"[$]$2" = xyes; then +- m4_if([$4], , :, [$4]) +-else +- m4_if([$5], , :, [$5]) +-fi +-])# _LT_LINKER_OPTION ++# _LT_TAG_COMPILER ++# ---------------- ++m4_defun([_LT_TAG_COMPILER], ++[AC_REQUIRE([AC_PROG_CC])dnl + +-# Old name: +-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) ++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl ++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl ++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl ++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +-# LT_CMD_MAX_LEN +-#--------------- +-AC_DEFUN([LT_CMD_MAX_LEN], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-# find the maximum length of command line arguments +-AC_MSG_CHECKING([the maximum length of command line arguments]) +-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl +- i=0 +- teststring="ABCD" ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; ++# Allow CC to be a program name with arguments. ++compiler=$CC ++])# _LT_TAG_COMPILER + +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; + +- cygwin* | mingw* | cegcc*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++m4_defun([_LT_COMPILER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* ++])# _LT_COMPILER_BOILERPLATE + +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) +- # This has been around since 386BSD, at least. Likely further. +- if test -x /sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` +- elif test -x /usr/sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` +- else +- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs +- fi +- # And add a safety zone +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- ;; ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++m4_defun([_LT_LINKER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* ++])# _LT_LINKER_BOILERPLATE + +- interix*) +- # We know the value 262144 and hardcode it with a safety zone (like BSD) +- lt_cv_sys_max_cmd_len=196608 +- ;; ++# _LT_REQUIRED_DARWIN_CHECKS ++# ------------------------- ++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ ++ case $host_os in ++ rhapsody* | darwin*) ++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) ++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ AC_CHECK_TOOL([LIPO], [lipo], [:]) ++ AC_CHECK_TOOL([OTOOL], [otool], [:]) ++ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) ++ _LT_DECL([], [DSYMUTIL], [1], ++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) ++ _LT_DECL([], [NMEDIT], [1], ++ [Tool to change global to local symbols on Mac OS X]) ++ _LT_DECL([], [LIPO], [1], ++ [Tool to manipulate fat objects and archives on Mac OS X]) ++ _LT_DECL([], [OTOOL], [1], ++ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) ++ _LT_DECL([], [OTOOL64], [1], ++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + +- osf*) +- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure +- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not +- # nice to cause kernel panics so lets avoid the loop below. +- # First set a reasonable default. +- lt_cv_sys_max_cmd_len=16384 +- # +- if test -x /sbin/sysconfig; then +- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in +- *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], ++ [lt_cv_apple_cc_single_mod=no ++ if test -z "${LT_MULTI_MODULE}"; then ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* ++ fi]) ++ AC_CACHE_CHECK([for -exported_symbols_list linker flag], ++ [lt_cv_ld_exported_symbols_list], ++ [lt_cv_ld_exported_symbols_list=no ++ save_LDFLAGS=$LDFLAGS ++ echo "_main" > conftest.sym ++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" ++ ]) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; ++ darwin1.*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on ++ # if running on 10.5 or later, the deployment target defaults ++ # to the OS version, if on x86, and 10.4, the deployment ++ # target defaults to 10.4. Don't you love it? ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac +- fi + ;; +- sco3.2v5*) +- lt_cv_sys_max_cmd_len=102400 +- ;; +- sysv5* | sco5v6* | sysv4.2uw2*) +- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` +- if test -n "$kargmax"; then +- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ esac ++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then ++ _lt_dar_single_mod='$single_module' ++ fi ++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then ++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else +- lt_cv_sys_max_cmd_len=32768 ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi +- ;; +- *) +- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` +- if test -n "$lt_cv_sys_max_cmd_len"; then +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ if test "$DSYMUTIL" != ":"; then ++ _lt_dsymutil='~$DSYMUTIL $lib || :' + else +- # Make teststring a little bigger before we do anything with it. +- # a 1K string should be a reasonable start. +- for i in 1 2 3 4 5 6 7 8 ; do +- teststring=$teststring$teststring +- done +- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} +- # If test is not a shell built-in, we'll probably end up computing a +- # maximum length that is only half of the actual maximum length, but +- # we can't tell. +- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ +- = "XX$teststring$teststring"; } >/dev/null 2>&1 && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- # Only check the string length outside the loop. +- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` +- teststring= +- # Add a significant safety factor because C++ compilers can tack on +- # massive amounts of additional arguments before passing them to the +- # linker. It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ _lt_dsymutil= + fi + ;; + esac + ]) +-if test -n $lt_cv_sys_max_cmd_len ; then +- AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +-else +- AC_MSG_RESULT(none) +-fi +-max_cmd_len=$lt_cv_sys_max_cmd_len +-_LT_DECL([], [max_cmd_len], [0], +- [What is the maximum length of a command?]) +-])# LT_CMD_MAX_LEN +- +-# Old name: +-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) +- + +-# _LT_HEADER_DLFCN +-# ---------------- +-m4_defun([_LT_HEADER_DLFCN], +-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +-])# _LT_HEADER_DLFCN + ++# _LT_DARWIN_LINKER_FEATURES ++# -------------------------- ++# Checks for linker and compiler features on darwin ++m4_defun([_LT_DARWIN_LINKER_FEATURES], ++[ ++ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" ++ case $cc_basename in ++ ifort*) _lt_dar_can_shared=yes ;; ++ *) _lt_dar_can_shared=$GCC ;; ++ esac ++ if test "$_lt_dar_can_shared" = "yes"; then ++ output_verbose_link_cmd=echo ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ m4_if([$1], [CXX], ++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi ++],[]) ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++]) + +-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# ---------------------------------------------------------------- +-m4_defun([_LT_TRY_DLOPEN_SELF], +-[m4_require([_LT_HEADER_DLFCN])dnl +-if test "$cross_compiling" = yes; then : +- [$4] +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext <<_LT_EOF +-[#line __oline__ "configure" +-#include "confdefs.h" ++# _LT_SYS_MODULE_PATH_AIX ++# ----------------------- ++# Links a minimal program and checks the executable ++# for the system default hardcoded library path. In most cases, ++# this is /usr/lib:/lib, but when the MPI compilers are used ++# the location of the communication and MPI libs are included too. ++# If we don't find anything, use the default library path according ++# to the aix ld manual. ++m4_defun([_LT_SYS_MODULE_PATH_AIX], ++[m4_require([_LT_DECL_SED])dnl ++AC_LINK_IFELSE(AC_LANG_PROGRAM,[ ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi],[]) ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++])# _LT_SYS_MODULE_PATH_AIX + +-#if HAVE_DLFCN_H +-#include +-#endif + +-#include ++# _LT_SHELL_INIT(ARG) ++# ------------------- ++m4_define([_LT_SHELL_INIT], ++[ifdef([AC_DIVERSION_NOTICE], ++ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], ++ [AC_DIVERT_PUSH(NOTICE)]) ++$1 ++AC_DIVERT_POP ++])# _LT_SHELL_INIT + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# _LT_PROG_ECHO_BACKSLASH ++# ----------------------- ++# Add some code to the start of the generated configure script which ++# will find an echo command which doesn't interpret backslashes. ++m4_defun([_LT_PROG_ECHO_BACKSLASH], ++[_LT_SHELL_INIT([ ++# Check that we are running under the correct shell. ++SHELL=${CONFIG_SHELL-/bin/sh} + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++case X$lt_ECHO in ++X*--fallback-echo) ++ # Remove one level of quotation (which was required for Make). ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ++ ;; ++esac + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +- else +- puts (dlerror ()); ++ECHO=${lt_ECHO-echo} ++if test "X[$]1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X[$]1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell. ++ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} ++fi + +- return status; +-}] ++if test "X[$]1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <<_LT_EOF ++[$]* + _LT_EOF +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) $1 ;; +- x$lt_dlneed_uscore) $2 ;; +- x$lt_dlunknown|x*) $3 ;; +- esac +- else : +- # compilation failed +- $3 +- fi ++ exit 0 + fi +-rm -fr conftest* +-])# _LT_TRY_DLOPEN_SELF + ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +-# LT_SYS_DLOPEN_SELF +-# ------------------ +-AC_DEFUN([LT_SYS_DLOPEN_SELF], +-[m4_require([_LT_HEADER_DLFCN])dnl +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= +- +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi + +- mingw* | pw32* | cegcc*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. + +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" + +- darwin*) +- # if libdl is installed we need to link against it +- AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ]) +- ;; +- +- *) +- AC_CHECK_FUNC([shl_load], +- [lt_cv_dlopen="shl_load"], +- [AC_CHECK_LIB([dld], [shl_load], +- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], +- [AC_CHECK_FUNC([dlopen], +- [lt_cv_dlopen="dlopen"], +- [AC_CHECK_LIB([dl], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], +- [AC_CHECK_LIB([svld], [dlopen], +- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], +- [AC_CHECK_LIB([dld], [dld_link], +- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) +- ]) +- ]) +- ]) +- ]) +- ]) +- ;; +- esac +- +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi +- +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +- +- save_LDFLAGS="$LDFLAGS" +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +- +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: + +- AC_CACHE_CHECK([whether a program can dlopen itself], +- lt_cv_dlopen_self, [dnl +- _LT_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, +- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) +- ]) ++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done + +- if test "x$lt_cv_dlopen_self" = xyes; then +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- AC_CACHE_CHECK([whether a statically linked program can dlopen itself], +- lt_cv_dlopen_self_static, [dnl +- _LT_TRY_DLOPEN_SELF( +- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, +- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) +- ]) ++ if test "$prev" != 'sed 50q "[$]0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi ++ fi + fi +- +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac +- +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac +- +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac ++ fi + fi +-_LT_DECL([dlopen_support], [enable_dlopen], [0], +- [Whether dlopen is supported]) +-_LT_DECL([dlopen_self], [enable_dlopen_self], [0], +- [Whether dlopen of programs is supported]) +-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], +- [Whether dlopen of statically linked programs is supported]) +-])# LT_SYS_DLOPEN_SELF +- +-# Old name: +-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + ++# Copy echo and quote the copy suitably for passing to libtool from ++# the Makefile, instead of quoting the original, which is used later. ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++fi + +-# _LT_COMPILER_C_O([TAGNAME]) +-# --------------------------- +-# Check to see if options -c and -o are simultaneously supported by compiler. +-# This macro does not hard code the compiler like AC_PROG_CC_C_O. +-m4_defun([_LT_COMPILER_C_O], +-[m4_require([_LT_DECL_SED])dnl +-m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_TAG_COMPILER])dnl +-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], +- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], +- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no +- $RM -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&AS_MESSAGE_LOG_FD +- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes +- fi +- fi +- chmod u+w . 2>&AS_MESSAGE_LOG_FD +- $RM conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files +- $RM out/* && rmdir out +- cd .. +- $RM -r conftest +- $RM conftest* ++AC_SUBST(lt_ECHO) + ]) +-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], +- [Does compiler simultaneously support -c and -o options?]) +-])# _LT_COMPILER_C_O ++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) ++_LT_DECL([], [ECHO], [1], ++ [An echo program that does not interpret backslashes]) ++])# _LT_PROG_ECHO_BACKSLASH + + +-# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +-# ---------------------------------- +-# Check to see if we can do hard links to lock some files if needed +-m4_defun([_LT_COMPILER_FILE_LOCKS], +-[m4_require([_LT_ENABLE_LOCK])dnl +-m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-_LT_COMPILER_C_O([$1]) ++# _LT_ENABLE_LOCK ++# --------------- ++m4_defun([_LT_ENABLE_LOCK], ++[AC_ARG_ENABLE([libtool-lock], ++ [AS_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-hard_links="nottested" +-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- AC_MSG_CHECKING([if we can lock with hard links]) +- hard_links=yes +- $RM conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- AC_MSG_RESULT([$hard_links]) +- if test "$hard_links" = no; then +- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) +- need_locks=warn ++# Some flags need to be propagated to the compiler or linker for good ++# libtool support. ++case $host in ++ia64-*-hpux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac + fi +-else +- need_locks=no +-fi +-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +-])# _LT_COMPILER_FILE_LOCKS ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '[#]line __oline__ "configure"' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; + ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; + +-# _LT_CHECK_OBJDIR +-# ---------------- +-m4_defun([_LT_CHECK_OBJDIR], +-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +-[rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs +-fi +-rmdir .libs 2>/dev/null]) +-objdir=$lt_cv_objdir +-_LT_DECL([], [objdir], [0], +- [The name of the directory that contains temporary libtool files])dnl +-m4_pattern_allow([LT_OBJDIR])dnl +-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", +- [Define to the sub-directory in which libtool stores uninstalled libraries.]) +-])# _LT_CHECK_OBJDIR ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, ++ [AC_LANG_PUSH(C) ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LANG_POP]) ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac + ++need_locks="$enable_libtool_lock" ++])# _LT_ENABLE_LOCK + +-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +-# -------------------------------------- +-# Check hardcoding attributes. +-m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +-[AC_MSG_CHECKING([how to hardcode library paths into programs]) +-_LT_TAGVAR(hardcode_action, $1)= +-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || +- test -n "$_LT_TAGVAR(runpath_var, $1)" || +- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + +- # We can hardcode non-existent directories. +- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && +- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then +- # Linking always hardcodes the temporary library directory. +- _LT_TAGVAR(hardcode_action, $1)=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- _LT_TAGVAR(hardcode_action, $1)=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- _LT_TAGVAR(hardcode_action, $1)=unsupported +-fi +-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) ++# _LT_CMD_OLD_ARCHIVE ++# ------------------- ++m4_defun([_LT_CMD_OLD_ARCHIVE], ++[AC_CHECK_TOOL(AR, ar, false) ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++_LT_DECL([], [AR], [1], [The archiver]) ++_LT_DECL([], [AR_FLAGS], [1]) + +-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || +- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +-_LT_TAGDECL([], [hardcode_action], [0], +- [How to hardcode a shared library path into an executable]) +-])# _LT_LINKER_HARDCODE_LIBPATH ++AC_CHECK_TOOL(STRIP, strip, :) ++test -z "$STRIP" && STRIP=: ++_LT_DECL([], [STRIP], [1], [A symbol stripping program]) ++ ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++test -z "$RANLIB" && RANLIB=: ++_LT_DECL([], [RANLIB], [1], ++ [Commands used to install an old-style archive]) + ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= + +-# _LT_CMD_STRIPLIB +-# ---------------- +-m4_defun([_LT_CMD_STRIPLIB], +-[m4_require([_LT_DECL_EGREP]) +-striplib= +-old_striplib= +-AC_MSG_CHECKING([whether stripping libraries is possible]) +-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- AC_MSG_RESULT([yes]) +-else +-# FIXME - insert some real tests, host_os isn't really good enough ++if test -n "$RANLIB"; then + case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- old_striplib="$STRIP -S" +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +- fi ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) +- AC_MSG_RESULT([no]) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi +-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +-_LT_DECL([], [striplib], [1]) +-])# _LT_CMD_STRIPLIB ++_LT_DECL([], [old_postinstall_cmds], [2]) ++_LT_DECL([], [old_postuninstall_cmds], [2]) ++_LT_TAGDECL([], [old_archive_cmds], [2], ++ [Commands used to build an old-style archive]) ++])# _LT_CMD_OLD_ARCHIVE + + +-# _LT_SYS_DYNAMIC_LINKER([TAG]) +-# ----------------------------- +-# PORTME Fill in your ld.so characteristics +-m4_defun([_LT_SYS_DYNAMIC_LINKER], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-m4_require([_LT_DECL_EGREP])dnl +-m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_DECL_OBJDUMP])dnl ++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------------------- ++# Check whether the given compiler option works ++AC_DEFUN([_LT_COMPILER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl + m4_require([_LT_DECL_SED])dnl +-AC_MSG_CHECKING([dynamic linker characteristics]) +-m4_if([$1], +- [], [ +-if test "$GCC" = yes; then +- case $host_os in +- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; +- *) lt_awk_arg="/^libraries:/" ;; +- esac +- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` +- else +- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- # Ok, now we have the path, separated by spaces, we can step through it +- # and add multilib dir if necessary. +- lt_tmp_lt_search_path_spec= +- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` +- for lt_sys_path in $lt_search_path_spec; do +- if test -d "$lt_sys_path/$lt_multi_os_dir"; then +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" +- else +- test -d "$lt_sys_path" && \ +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" +- fi +- done +- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' +-BEGIN {RS=" "; FS="/|\n";} { +- lt_foo=""; +- lt_count=0; +- for (lt_i = NF; lt_i > 0; lt_i--) { +- if ($lt_i != "" && $lt_i != ".") { +- if ($lt_i == "..") { +- lt_count++; +- } else { +- if (lt_count == 0) { +- lt_foo="/" $lt_i lt_foo; +- } else { +- lt_count--; +- } +- } +- } +- } +- if (lt_foo != "") { lt_freq[[lt_foo]]++; } +- if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +-}'` +- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$3" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ fi ++ $RM conftest* ++]) ++ ++if test x"[$]$2" = xyes; then ++ m4_if([$5], , :, [$5]) + else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +-fi]) +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-need_lib_prefix=unknown +-hardcode_into_libs=no ++ m4_if([$6], , :, [$6]) ++fi ++])# _LT_COMPILER_OPTION + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown ++# Old name: ++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; ++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------- ++# Check whether the given linker option works ++AC_DEFUN([_LT_LINKER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl ++AC_CACHE_CHECK([$1], [$2], ++ [$2=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $3" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi ++ else ++ $2=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" ++]) + +-aix[[4-9]]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[[01]] | aix4.[[01]].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; ++if test x"[$]$2" = xyes; then ++ m4_if([$4], , :, [$4]) ++else ++ m4_if([$5], , :, [$5]) ++fi ++])# _LT_LINKER_OPTION + +-amigaos*) +- case $host_cpu in +- powerpc) +- # Since July 2007 AmigaOS4 officially supports .so libraries. +- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- ;; +- m68k) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; +- esac +- ;; ++# Old name: ++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; + +-bsdi[[45]]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; ++# LT_CMD_MAX_LEN ++#--------------- ++AC_DEFUN([LT_CMD_MAX_LEN], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments ++AC_MSG_CHECKING([the maximum length of command line arguments]) ++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl ++ i=0 ++ teststring="ABCD" + +-cygwin* | mingw* | pw32* | cegcc*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname~ +- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then +- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; +- fi' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $RM \$dlpath' +- shlibpath_overrides_runpath=yes +- +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw* | cegcc*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; + ;; + +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ cygwin* | mingw* | cegcc*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; + ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; +- +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +-m4_if([$1], [],[ +- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; +- +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-freebsd1*) +- dynamic_linker=no +- ;; ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; + +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[[123]]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; +- freebsd3.[[01]]* | freebsdelf3.[[01]]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 + ;; +- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ +- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi + ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 + ;; +- esac +- ;; +- +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; +- +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ lt_cv_sys_max_cmd_len=32768 + fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi + ;; + esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; ++]) ++if test -n $lt_cv_sys_max_cmd_len ; then ++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len) ++else ++ AC_MSG_RESULT(none) ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++])# LT_CMD_MAX_LEN + +-interix[[3-9]]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; ++# Old name: ++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu | kopensolaris*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # Some binutils ld are patched to set DT_RUNPATH +- save_LDFLAGS=$LDFLAGS +- save_libdir=$libdir +- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ +- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" +- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], +- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], +- [shlibpath_overrides_runpath=yes])]) +- LDFLAGS=$save_LDFLAGS +- libdir=$save_libdir ++# _LT_HEADER_DLFCN ++# ---------------- ++m4_defun([_LT_HEADER_DLFCN], ++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ++])# _LT_HEADER_DLFCN + +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" +- fi ++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# ---------------------------------------------------------------- ++m4_defun([_LT_TRY_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "$cross_compiling" = yes; then : ++ [$4] ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++[#line __oline__ "configure" ++#include "confdefs.h" + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; ++#if HAVE_DLFCN_H ++#include ++#endif + +-netbsdelf*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='NetBSD ld.elf_so' +- ;; ++#include + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +-*nto* | *qnx*) +- version_type=qnx +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='ldqnx.so' +- ;; ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[[89]] | openbsd2.[[89]].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } + else +- shlibpath_overrides_runpath=yes ++ puts (dlerror ()); ++ ++ return status; ++}] ++_LT_EOF ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) $1 ;; ++ x$lt_dlneed_uscore) $2 ;; ++ x$lt_dlunknown|x*) $3 ;; ++ esac ++ else : ++ # compilation failed ++ $3 + fi +- ;; ++fi ++rm -fr conftest* ++])# _LT_TRY_DLOPEN_SELF + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; ++# LT_SYS_DLOPEN_SELF ++# ------------------ ++AC_DEFUN([LT_SYS_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= + +-rdos*) +- dynamic_linker=no +- ;; ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; ++ mingw* | pw32* | cegcc*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; + +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; ++ darwin*) ++ # if libdl is installed we need to link against it ++ AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ]) ++ ;; + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; ++ *) ++ AC_CHECK_FUNC([shl_load], ++ [lt_cv_dlopen="shl_load"], ++ [AC_CHECK_LIB([dld], [shl_load], ++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], ++ [AC_CHECK_FUNC([dlopen], ++ [lt_cv_dlopen="dlopen"], ++ [AC_CHECK_LIB([dl], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], ++ [AC_CHECK_LIB([svld], [dlopen], ++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], ++ [AC_CHECK_LIB([dld], [dld_link], ++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ]) ++ ;; ++ esac + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes + else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac ++ enable_dlopen=no + fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; + +-tpf*) +- # TPF is a cross-target only. Preferred cross-host = GNU/Linux. +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + +-*) +- dynamic_linker=no +- ;; +-esac +-AC_MSG_RESULT([$dynamic_linker]) +-test "$dynamic_linker" = no && can_build_shared=no ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi ++ AC_CACHE_CHECK([whether a program can dlopen itself], ++ lt_cv_dlopen_self, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, ++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ++ ]) + +-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +-fi +-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself], ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, ++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ++ ]) ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac + fi ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++])# LT_SYS_DLOPEN_SELF + +-_LT_DECL([], [variables_saved_for_relink], [1], +- [Variables whose values should be saved in libtool wrapper scripts and +- restored at link time]) +-_LT_DECL([], [need_lib_prefix], [0], +- [Do we need the "lib" prefix for modules?]) +-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +-_LT_DECL([], [version_type], [0], [Library versioning type]) +-_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +-_LT_DECL([], [shlibpath_overrides_runpath], [0], +- [Is shlibpath searched before the hard-coded library search path?]) +-_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +-_LT_DECL([], [library_names_spec], [1], +- [[List of archive names. First name is the real one, the rest are links. +- The last name is the one that the linker finds with -lNAME]]) +-_LT_DECL([], [soname_spec], [1], +- [[The coded name of the library, if different from the real name]]) +-_LT_DECL([], [postinstall_cmds], [2], +- [Command to use after installation of a shared archive]) +-_LT_DECL([], [postuninstall_cmds], [2], +- [Command to use after uninstallation of a shared archive]) +-_LT_DECL([], [finish_cmds], [2], +- [Commands used to finish a libtool library installation in a directory]) +-_LT_DECL([], [finish_eval], [1], +- [[As "finish_cmds", except a single script fragment to be evaled but +- not shown]]) +-_LT_DECL([], [hardcode_into_libs], [0], +- [Whether we should hardcode library paths into libraries]) +-_LT_DECL([], [sys_lib_search_path_spec], [2], +- [Compile-time system search path for libraries]) +-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], +- [Run-time system search path for libraries]) +-])# _LT_SYS_DYNAMIC_LINKER ++# Old name: ++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +-# _LT_PATH_TOOL_PREFIX(TOOL) +-# -------------------------- +-# find a file program which can recognize shared library +-AC_DEFUN([_LT_PATH_TOOL_PREFIX], +-[m4_require([_LT_DECL_EGREP])dnl +-AC_MSG_CHECKING([for $1]) +-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +-[case $MAGIC_CMD in +-[[\\/*] | ?:[\\/]*]) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +-dnl $ac_dummy forces splitting on constant user-supplied paths. +-dnl POSIX.2 word splitting is done only on the output of word expansions, +-dnl not every word. This closes a longstanding sh security hole. +- ac_dummy="m4_if([$2], , $PATH, [$2])" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$1; then +- lt_cv_path_MAGIC_CMD="$ac_dir/$1" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <<_LT_EOF 1>&2 ++# _LT_COMPILER_C_O([TAGNAME]) ++# --------------------------- ++# Check to see if options -c and -o are simultaneously supported by compiler. ++# This macro does not hard code the compiler like AC_PROG_CC_C_O. ++m4_defun([_LT_COMPILER_C_O], ++[m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&AS_MESSAGE_LOG_FD ++ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ fi ++ fi ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* ++]) ++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], ++ [Does compiler simultaneously support -c and -o options?]) ++])# _LT_COMPILER_C_O + +-_LT_EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac]) +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- AC_MSG_RESULT($MAGIC_CMD) ++ ++# _LT_COMPILER_FILE_LOCKS([TAGNAME]) ++# ---------------------------------- ++# Check to see if we can do hard links to lock some files if needed ++m4_defun([_LT_COMPILER_FILE_LOCKS], ++[m4_require([_LT_ENABLE_LOCK])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_COMPILER_C_O([$1]) ++ ++hard_links="nottested" ++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ AC_MSG_CHECKING([if we can lock with hard links]) ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ AC_MSG_RESULT([$hard_links]) ++ if test "$hard_links" = no; then ++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) ++ need_locks=warn ++ fi + else +- AC_MSG_RESULT(no) ++ need_locks=no + fi +-_LT_DECL([], [MAGIC_CMD], [0], +- [Used to examine libraries when file_magic_cmd begins with "file"])dnl +-])# _LT_PATH_TOOL_PREFIX ++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ++])# _LT_COMPILER_FILE_LOCKS + +-# Old name: +-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + ++# _LT_CHECK_OBJDIR ++# ---------------- ++m4_defun([_LT_CHECK_OBJDIR], ++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], ++[rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null]) ++objdir=$lt_cv_objdir ++_LT_DECL([], [objdir], [0], ++ [The name of the directory that contains temporary libtool files])dnl ++m4_pattern_allow([LT_OBJDIR])dnl ++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", ++ [Define to the sub-directory in which libtool stores uninstalled libraries.]) ++])# _LT_CHECK_OBJDIR + +-# _LT_PATH_MAGIC +-# -------------- +-# find a file program which can recognize a shared library +-m4_defun([_LT_PATH_MAGIC], +-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ ++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) ++# -------------------------------------- ++# Check hardcoding attributes. ++m4_defun([_LT_LINKER_HARDCODE_LIBPATH], ++[AC_MSG_CHECKING([how to hardcode library paths into programs]) ++_LT_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || ++ test -n "$_LT_TAGVAR(runpath_var, $1)" || ++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then ++ ++ # We can hardcode non-existent directories. ++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then ++ # Linking always hardcodes the temporary library directory. ++ _LT_TAGVAR(hardcode_action, $1)=relink + else +- MAGIC_CMD=: ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ _LT_TAGVAR(hardcode_action, $1)=immediate + fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ _LT_TAGVAR(hardcode_action, $1)=unsupported + fi +-])# _LT_PATH_MAGIC +- ++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +-# LT_PATH_LD +-# ---------- +-# find the pathname to the GNU or non-GNU linker +-AC_DEFUN([LT_PATH_LD], +-[AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-m4_require([_LT_DECL_SED])dnl +-m4_require([_LT_DECL_EGREP])dnl ++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || ++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++_LT_TAGDECL([], [hardcode_action], [0], ++ [How to hardcode a shared library path into an executable]) ++])# _LT_LINKER_HARDCODE_LIBPATH + +-AC_ARG_WITH([gnu-ld], +- [AS_HELP_STRING([--with-gnu-ld], +- [assume the C compiler uses GNU ld @<:@default=no@:>@])], +- [test "$withval" = no || with_gnu_ld=yes], +- [with_gnu_ld=no])dnl + +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- AC_MSG_CHECKING([for ld used by $CC]) +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++# _LT_CMD_STRIPLIB ++# ---------------- ++m4_defun([_LT_CMD_STRIPLIB], ++[m4_require([_LT_DECL_EGREP]) ++striplib= ++old_striplib= ++AC_MSG_CHECKING([whether stripping libraries is possible]) ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ AC_MSG_RESULT([yes]) ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ fi ++ ;; + *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ AC_MSG_RESULT([no]) ++ ;; + esac +- case $ac_prog in +- # Accept absolute paths. +- [[\\/]]* | ?:[[\\/]]*) +- re_direlt='/[[^/]][[^/]]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` +- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- AC_MSG_CHECKING([for GNU ld]) +-else +- AC_MSG_CHECKING([for non-GNU ld]) + fi +-AC_CACHE_VAL(lt_cv_path_LD, +-[if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some variants of GNU ld only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 /dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done +- IFS="$lt_save_ifs" ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[[lt_foo]]++; } ++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` + else +- lt_cv_path_LD="$LD" # Let the user override the test with a path. ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + fi]) +-LD="$lt_cv_path_LD" +-if test -n "$LD"; then +- AC_MSG_RESULT($LD) +-else +- AC_MSG_RESULT(no) +-fi +-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +-_LT_PATH_LD_GNU +-AC_SUBST([LD]) +- +-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) +-])# LT_PATH_LD ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++need_lib_prefix=unknown ++hardcode_into_libs=no + +-# Old names: +-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) +-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AM_PROG_LD], []) +-dnl AC_DEFUN([AC_PROG_LD], []) ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown + ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH + +-# _LT_PATH_LD_GNU +-#- -------------- +-m4_defun([_LT_PATH_LD_GNU], +-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +-[# I'd rather use --version here, but apparently some GNU lds only accept -v. +-case `$LD -v 2>&1 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else +- reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' + fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; +-esac +-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl +-_LT_DECL([], [reload_cmds], [2])dnl +-])# _LT_CMD_RELOAD ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac ++ ;; + ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; + +-# _LT_CHECK_MAGIC_METHOD +-# ---------------------- +-# how to check for library dependencies +-# -- PORTME fill in with the dynamic library characteristics +-m4_defun([_LT_CHECK_MAGIC_METHOD], +-[m4_require([_LT_DECL_EGREP]) +-m4_require([_LT_DECL_OBJDUMP]) +-AC_CACHE_CHECK([how to recognize dependent libraries], +-lt_cv_deplibs_check_method, +-[lt_cv_file_magic_cmd='$MAGIC_CMD' +-lt_cv_file_magic_test_file= +-lt_cv_deplibs_check_method='unknown' +-# Need to set the preceding variable on all platforms that support +-# interlibrary dependencies. +-# 'none' -- dependencies not supported. +-# `unknown' -- same as none, but documents that we really don't know. +-# 'pass_all' -- all dependencies passed with no checks. +-# 'test_compile' -- check by making test program. +-# 'file_magic [[regex]]' -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given extended regex. +-# If you have `file' or equivalent on your system and you're not sure +-# whether `pass_all' will *always* work, you probably want this one. +- +-case $host_os in +-aix[[4-9]]*) +- lt_cv_deplibs_check_method=pass_all ++bsdi[[45]]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs + ;; + +-beos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++cygwin* | mingw* | pw32* | cegcc*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no + +-bsdi[[45]]*) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- lt_cv_file_magic_test_file=/shlib/libc.so +- ;; ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $RM \$dlpath' ++ shlibpath_overrides_runpath=yes + +-cygwin*) +- # func_win32_libid is a shell function defined in ltmain.sh +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw* | cegcc*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH + ;; + +-mingw* | pw32*) +- # Base MSYS/MinGW do not provide the 'file' command needed by +- # func_win32_libid shell function, so use a weaker test based on 'objdump', +- # unless we find 'file', for example because we are cross-compiling. +- if ( file / ) >/dev/null 2>&1; then +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' +- fi ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +-cegcc) +- # use the weaker test based on 'objdump'. See mingw*. +- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH + ;; + +-darwin* | rhapsody*) +- lt_cv_deplibs_check_method=pass_all ++freebsd1*) ++ dynamic_linker=no + ;; + + freebsd* | dragonfly*) +- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then +- case $host_cpu in +- i*86 ) +- # Not sure whether the presence of OpenBSD here was a mistake. +- # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` +- ;; +- esac ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` + else +- lt_cv_deplibs_check_method=pass_all ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac + fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ *) # from 4.6 on, and DragonFly ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac + ;; + + gnu*) +- lt_cv_deplibs_check_method=pass_all ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes + ;; + +-hpux10.20* | hpux11*) +- lt_cv_file_magic_cmd=/usr/bin/file ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no + case $host_cpu in + ia64*) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' +- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) +- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] +- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) +- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' +- lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' + ;; + + interix[[3-9]]*) +- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes + ;; + + irix5* | irix6* | nonstopux*) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; + esac +- lt_cv_deplibs_check_method=pass_all ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no + ;; + + # This must be Linux ELF. + linux* | k*bsd*-gnu | kopensolaris*-gnu) +- lt_cv_deplibs_check_method=pass_all ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ ++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], ++ [shlibpath_overrides_runpath=yes])]) ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' + ;; + +-netbsd* | netbsdelf*-gnu) +- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' + else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' + fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes + ;; + +-newos6*) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libnls.so ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes + ;; + + *nto* | *qnx*) +- lt_cv_deplibs_check_method=pass_all ++ version_type=qnx ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' + ;; + + openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' ++ case $host_os in ++ openbsd2.[[89]] | openbsd2.[[89]].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac + else +- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ shlibpath_overrides_runpath=yes + fi + ;; + ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ + osf3* | osf4* | osf5*) +- lt_cv_deplibs_check_method=pass_all ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + + rdos*) +- lt_cv_deplibs_check_method=pass_all ++ dynamic_linker=no + ;; + + solaris*) +- lt_cv_deplibs_check_method=pass_all ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' + ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes + ;; + + sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in +- motorola) +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` +- ;; +- ncr) +- lt_cv_deplibs_check_method=pass_all +- ;; +- sequent) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' +- ;; +- sni) +- lt_cv_file_magic_cmd='/bin/file' +- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" +- lt_cv_file_magic_test_file=/lib/libc.so +- ;; +- siemens) +- lt_cv_deplibs_check_method=pass_all +- ;; +- pc) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; + esac + ;; + +-tpf*) +- lt_cv_deplibs_check_method=pass_all ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi + ;; +-esac +-]) +-file_magic_cmd=$lt_cv_file_magic_cmd +-deplibs_check_method=$lt_cv_deplibs_check_method +-test -z "$deplibs_check_method" && deplibs_check_method=unknown +- +-_LT_DECL([], [deplibs_check_method], [1], +- [Method to check whether dependent libraries are shared objects]) +-_LT_DECL([], [file_magic_cmd], [1], +- [Command to use when deplibs_check_method == "file_magic"]) +-])# _LT_CHECK_MAGIC_METHOD + +- +-# LT_PATH_NM +-# ---------- +-# find the pathname to a BSD- or MS-compatible name lister +-AC_DEFUN([LT_PATH_NM], +-[AC_REQUIRE([AC_PROG_CC])dnl +-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +-[if test -n "$NM"; then +- # Let the user override the test. +- lt_cv_path_NM="$NM" +-else +- lt_nm_to_check="${ac_tool_prefix}nm" +- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then +- lt_nm_to_check="$lt_nm_to_check nm" +- fi +- for lt_tmp_nm in $lt_nm_to_check; do +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/$lt_tmp_nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" +- break +- ;; +- *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags +- ;; +- esac +- ;; +- esac +- fi +- done +- IFS="$lt_save_ifs" +- done +- : ${lt_cv_path_NM=no} +-fi]) +-if test "$lt_cv_path_NM" != "no"; then +- NM="$lt_cv_path_NM" +-else +- # Didn't find any BSD compatible name lister, look for dumpbin. +- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) +- AC_SUBST([DUMPBIN]) +- if test "$DUMPBIN" != ":"; then +- NM="$DUMPBIN" +- fi +-fi +-test -z "$NM" && NM=nm +-AC_SUBST([NM]) +-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl +- +-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], +- [lt_cv_nm_interface="BSD nm" +- echo "int some_variable = 0;" > conftest.$ac_ext +- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) +- (eval "$ac_compile" 2>conftest.err) +- cat conftest.err >&AS_MESSAGE_LOG_FD +- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) +- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) +- cat conftest.err >&AS_MESSAGE_LOG_FD +- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) +- cat conftest.out >&AS_MESSAGE_LOG_FD +- if $GREP 'External.*some_variable' conftest.out > /dev/null; then +- lt_cv_nm_interface="MS dumpbin" ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac + fi +- rm -f conftest*]) +-])# LT_PATH_NM +- +-# Old names: +-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AM_PROG_NM], []) +-dnl AC_DEFUN([AC_PROG_NM], []) +- ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; + +-# LT_LIB_M +-# -------- +-# check for math library +-AC_DEFUN([LT_LIB_M], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-LIBM= +-case $host in +-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) +- # These system don't have libm, or don't need it ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes + ;; +-*-ncr-sysv4.3*) +- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") +- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH + ;; ++ + *) +- AC_CHECK_LIB(m, cos, LIBM="-lm") ++ dynamic_linker=no + ;; + esac +-AC_SUBST([LIBM]) +-])# LT_LIB_M +- +-# Old name: +-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_CHECK_LIBM], []) +- +- +-# _LT_COMPILER_NO_RTTI([TAGNAME]) +-# ------------------------------- +-m4_defun([_LT_COMPILER_NO_RTTI], +-[m4_require([_LT_TAG_COMPILER])dnl +- +-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++AC_MSG_RESULT([$dynamic_linker]) ++test "$dynamic_linker" = no && can_build_shared=no + ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" + if test "$GCC" = yes; then +- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +- +- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], +- lt_cv_prog_compiler_rtti_exceptions, +- [-fno-rtti -fno-exceptions], [], +- [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi +-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], +- [Compiler flag to turn off builtin functions]) +-])# _LT_COMPILER_NO_RTTI +- +- +-# _LT_CMD_GLOBAL_SYMBOLS +-# ---------------------- +-m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([LT_PATH_NM])dnl +-AC_REQUIRE([LT_PATH_LD])dnl +-m4_require([_LT_DECL_SED])dnl +-m4_require([_LT_DECL_EGREP])dnl +-m4_require([_LT_TAG_COMPILER])dnl + +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +-[ +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi + +-# Character class describing NM global symbol codes. +-symcode='[[BCDEGRST]]' ++_LT_DECL([], [variables_saved_for_relink], [1], ++ [Variables whose values should be saved in libtool wrapper scripts and ++ restored at link time]) ++_LT_DECL([], [need_lib_prefix], [0], ++ [Do we need the "lib" prefix for modules?]) ++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) ++_LT_DECL([], [version_type], [0], [Library versioning type]) ++_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) ++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) ++_LT_DECL([], [shlibpath_overrides_runpath], [0], ++ [Is shlibpath searched before the hard-coded library search path?]) ++_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) ++_LT_DECL([], [library_names_spec], [1], ++ [[List of archive names. First name is the real one, the rest are links. ++ The last name is the one that the linker finds with -lNAME]]) ++_LT_DECL([], [soname_spec], [1], ++ [[The coded name of the library, if different from the real name]]) ++_LT_DECL([], [postinstall_cmds], [2], ++ [Command to use after installation of a shared archive]) ++_LT_DECL([], [postuninstall_cmds], [2], ++ [Command to use after uninstallation of a shared archive]) ++_LT_DECL([], [finish_cmds], [2], ++ [Commands used to finish a libtool library installation in a directory]) ++_LT_DECL([], [finish_eval], [1], ++ [[As "finish_cmds", except a single script fragment to be evaled but ++ not shown]]) ++_LT_DECL([], [hardcode_into_libs], [0], ++ [Whether we should hardcode library paths into libraries]) ++_LT_DECL([], [sys_lib_search_path_spec], [2], ++ [Compile-time system search path for libraries]) ++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], ++ [Run-time system search path for libraries]) ++])# _LT_SYS_DYNAMIC_LINKER + +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[[BCDT]]' +- ;; +-cygwin* | mingw* | pw32* | cegcc*) +- symcode='[[ABCDGISTW]]' +- ;; +-hpux*) +- if test "$host_cpu" = ia64; then +- symcode='[[ABCDEGRST]]' +- fi +- ;; +-irix* | nonstopux*) +- symcode='[[BCDEGRST]]' +- ;; +-osf*) +- symcode='[[BCDEGQRST]]' +- ;; +-solaris*) +- symcode='[[BDRT]]' +- ;; +-sco3.2v5*) +- symcode='[[DT]]' ++# _LT_PATH_TOOL_PREFIX(TOOL) ++# -------------------------- ++# find a file program which can recognize shared library ++AC_DEFUN([_LT_PATH_TOOL_PREFIX], ++[m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +-sysv4.2uw2*) +- symcode='[[DT]]' +- ;; +-sysv5* | sco5v6* | unixware* | OpenUNIX*) +- symcode='[[ABDT]]' +- ;; +-sysv4) +- symcode='[[DFNSTU]]' +- ;; +-esac +- +-# If we're using GNU nm, then use its standard symbol codes. +-case `$NM -V 2>&1` in +-*GNU* | *'with BFD'*) +- symcode='[[ABCDGIRSTW]]' ;; +-esac +- +-# Transform an extracted symbol line into a proper C declaration. +-# Some systems (esp. on ia64) link data and code symbols differently, +-# so use this general approach. +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$1; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/$1" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 + +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $build_os in +-mingw*) +- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++_LT_EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +-esac ++esac]) ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ AC_MSG_RESULT($MAGIC_CMD) ++else ++ AC_MSG_RESULT(no) ++fi ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++])# _LT_PATH_TOOL_PREFIX + +-# Try without a prefix underscore, then with it. +-for ac_symprfx in "" "_"; do ++# Old name: ++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + +- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. +- symxfrm="\\1 $ac_symprfx\\2 \\2" + +- # Write the raw and C identifiers. +- if test "$lt_cv_nm_interface" = "MS dumpbin"; then +- # Fake it for dumpbin and say T for any non-static function +- # and D for any global variable. +- # Also find C++ and __fastcall symbols from MSVC++, +- # which start with @ or ?. +- lt_cv_sys_global_symbol_pipe="$AWK ['"\ +-" {last_section=section; section=\$ 3};"\ +-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +-" \$ 0!~/External *\|/{next};"\ +-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +-" {if(hide[section]) next};"\ +-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +-" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +-" ' prfx=^$ac_symprfx]" ++# _LT_PATH_MAGIC ++# -------------- ++# find a file program which can recognize a shared library ++m4_defun([_LT_PATH_MAGIC], ++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ MAGIC_CMD=: + fi ++fi ++])# _LT_PATH_MAGIC + +- # Check to see that the pipe works correctly. +- pipe_works=no + +- rm -f conftest* +- cat > conftest.$ac_ext <<_LT_EOF +-#ifdef __cplusplus +-extern "C" { +-#endif +-char nm_test_var; +-void nm_test_func(void); +-void nm_test_func(void){} +-#ifdef __cplusplus +-} +-#endif +-int main(){nm_test_var='a';nm_test_func();return(0);} +-_LT_EOF ++# LT_PATH_LD ++# ---------- ++# find the pathname to the GNU or non-GNU linker ++AC_DEFUN([LT_PATH_LD], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl + +- if AC_TRY_EVAL(ac_compile); then +- # Now try to grab the symbols. +- nlist=conftest.nm +- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl + +- # Make sure that we snagged all the symbols we need. +- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then +- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then +- cat <<_LT_EOF > conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ AC_MSG_CHECKING([for ld used by $CC]) ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [[\\/]]* | ?:[[\\/]]*) ++ re_direlt='/[[^/]][[^/]]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ AC_MSG_CHECKING([for GNU ld]) ++else ++ AC_MSG_CHECKING([for non-GNU ld]) ++fi ++AC_CACHE_VAL(lt_cv_path_LD, ++[if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 > conftest.$ac_ext' ++_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) ++])# LT_PATH_LD + +- cat <<_LT_EOF >> conftest.$ac_ext ++# Old names: ++AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) ++AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_LD], []) ++dnl AC_DEFUN([AC_PROG_LD], []) + +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- void *address; +-} +-lt__PROGRAM__LTX_preloaded_symbols[[]] = +-{ +- { "@PROGRAM@", (void *) 0 }, +-_LT_EOF +- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext +- cat <<\_LT_EOF >> conftest.$ac_ext +- {0, (void *) 0} +-}; + +-/* This works around a problem in FreeBSD linker */ +-#ifdef FREEBSD_WORKAROUND +-static const void *lt_preloaded_setup() { +- return lt__PROGRAM__LTX_preloaded_symbols; +-} +-#endif ++# _LT_PATH_LD_GNU ++#- -------------- ++m4_defun([_LT_PATH_LD_GNU], ++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, ++[# I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &AS_MESSAGE_LOG_FD +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD +- fi ++ ++# _LT_CMD_RELOAD ++# -------------- ++# find reload flag for linker ++# -- PORTME Some linkers may need a different reload flag. ++m4_defun([_LT_CMD_RELOAD], ++[AC_CACHE_CHECK([for $LD option to reload object files], ++ lt_cv_ld_reload_flag, ++ [lt_cv_ld_reload_flag='-r']) ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi ++ ;; ++esac ++_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl ++_LT_DECL([], [reload_cmds], [2])dnl ++])# _LT_CMD_RELOAD ++ ++ ++# _LT_CHECK_MAGIC_METHOD ++# ---------------------- ++# how to check for library dependencies ++# -- PORTME fill in with the dynamic library characteristics ++m4_defun([_LT_CHECK_MAGIC_METHOD], ++[m4_require([_LT_DECL_EGREP]) ++m4_require([_LT_DECL_OBJDUMP]) ++AC_CACHE_CHECK([how to recognize dependent libraries], ++lt_cv_deplibs_check_method, ++[lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. ++ ++case $host_os in ++aix[[4-9]]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++bsdi[[45]]*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; ++ ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' + else +- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD +- cat conftest.$ac_ext >&5 ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' + fi +- rm -rf conftest* conftst* ++ ;; + +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break ++cegcc) ++ # use the weaker test based on 'objdump'. See mingw*. ++ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ ;; ++ ++darwin* | rhapsody*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++freebsd* | dragonfly*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ case $host_cpu in ++ i*86 ) ++ # Not sure whether the presence of OpenBSD here was a mistake. ++ # Let's accept both of them until this is cleared up. ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ++ ;; ++ esac + else +- lt_cv_sys_global_symbol_pipe= ++ lt_cv_deplibs_check_method=pass_all + fi +-done +-]) +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- lt_cv_sys_global_symbol_to_cdecl= +-fi +-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- AC_MSG_RESULT(failed) +-else +- AC_MSG_RESULT(ok) +-fi ++ ;; + +-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], +- [Take the output of nm and produce a listing of raw symbols and C names]) +-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], +- [Transform the output of nm in a proper C declaration]) +-_LT_DECL([global_symbol_to_c_name_address], +- [lt_cv_sys_global_symbol_to_c_name_address], [1], +- [Transform the output of nm in a C name address pair]) +-_LT_DECL([global_symbol_to_c_name_address_lib_prefix], +- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], +- [Transform the output of nm in a C name address pair when lib prefix is needed]) +-]) # _LT_CMD_GLOBAL_SYMBOLS ++gnu*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + ++hpux10.20* | hpux11*) ++ lt_cv_file_magic_cmd=/usr/bin/file ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ++ ;; ++ *) ++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl ++ ;; ++ esac ++ ;; + +-# _LT_COMPILER_PIC([TAGNAME]) +-# --------------------------- +-m4_defun([_LT_COMPILER_PIC], +-[m4_require([_LT_TAG_COMPILER])dnl +-_LT_TAGVAR(lt_prog_compiler_wl, $1)= +-_LT_TAGVAR(lt_prog_compiler_pic, $1)= +-_LT_TAGVAR(lt_prog_compiler_static, $1)= ++interix[[3-9]]*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; + +-AC_MSG_CHECKING([for $compiler option to produce PIC]) +-m4_if([$1], [CXX], [ +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; ++# This must be Linux ELF. ++linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + +- amigaos*) +- case $host_cpu in +- powerpc) +- # see comment about AmigaOS4 .so support +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- m68k) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; +- esac +- ;; ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ else ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' ++ fi ++ ;; + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | cygwin* | os2* | pw32* | cegcc*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- m4_if([$1], [GCJ], [], +- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- _LT_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; +- hpux*) +- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit +- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag +- # sets the default TLS model and affects inlining. +- case $host_cpu in +- hppa*64*) +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; +- *qnx* | *nto*) +- # QNX uses GNU C++, but need to define -shared option too, otherwise +- # it will coredump. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac ++newos6*) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' ++ lt_cv_file_magic_cmd=/usr/bin/file ++ lt_cv_file_magic_test_file=/usr/lib/libnls.so ++ ;; ++ ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++openbsd*) ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else +- case $host_os in +- aix[[4-9]]*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68*) +- # Green Hills C++ Compiler +- # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' ++ fi ++ ;; ++ ++osf3* | osf4* | osf5*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++rdos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++solaris*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++sysv4 | sysv4.3*) ++ case $host_vendor in ++ motorola) ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' ++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ++ ;; ++ ncr) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ sequent) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ++ ;; ++ sni) ++ lt_cv_file_magic_cmd='/bin/file' ++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" ++ lt_cv_file_magic_test_file=/lib/libc.so ++ ;; ++ siemens) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ esac ++ ;; ++ ++tpf*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++esac ++]) ++file_magic_cmd=$lt_cv_file_magic_cmd ++deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown ++ ++_LT_DECL([], [deplibs_check_method], [1], ++ [Method to check whether dependent libraries are shared objects]) ++_LT_DECL([], [file_magic_cmd], [1], ++ [Command to use when deplibs_check_method == "file_magic"]) ++])# _LT_CHECK_MAGIC_METHOD ++ ++ ++# LT_PATH_NM ++# ---------- ++# find the pathname to a BSD- or MS-compatible name lister ++AC_DEFUN([LT_PATH_NM], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, ++[if test -n "$NM"; then ++ # Let the user override the test. ++ lt_cv_path_NM="$NM" ++else ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break + ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++*) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | dragonfly*) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- if test "$host_cpu" != ia64; then +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- fi +- ;; +- aCC*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- ;; +- *) +- ;; +- esac +- ;; +- interix*) +- # This is c89, which is MS Visual C++ (no shared libs) +- # Anyone wants to do a port? +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- # CC pic flag -KPIC is the default. ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break + ;; + *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags + ;; ++ esac ++ ;; + esac +- ;; +- linux* | k*bsd*-gnu | kopensolaris*-gnu) +- case $cc_basename in +- KCC*) +- # KAI C++ Compiler +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- ecpc* ) +- # old Intel C++ for x86_64 which still supported -KPIC. +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- icpc* ) +- # Intel C++, used to be incompatible with GCC. +- # ICC 10 doesn't accept -KPIC any more. +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- pgCC* | pgcpp*) +- # Portland Group C++ compiler +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- cxx*) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- xlc* | xlC*) +- # IBM XL 8.0 on PPC +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' +- ;; +- *) +- ;; +- esac +- ;; +- netbsd* | netbsdelf*-gnu) +- ;; +- *qnx* | *nto*) +- # QNX uses GNU C++, but need to define -shared option too, otherwise +- # it will coredump. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- cxx*) +- # Digital/Compaq C++ +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- psos*) +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- ;; +- *) +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- lcc*) +- # Lucid +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- case $cc_basename in +- CC*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- *) +- ;; +- esac +- ;; +- vxworks*) +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac ++ fi ++ done ++ IFS="$lt_save_ifs" ++ done ++ : ${lt_cv_path_NM=no} ++fi]) ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" + fi +-], +-[ +- if test "$GCC" = yes; then +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; ++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], ++ [lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++])# LT_PATH_NM + +- amigaos*) +- case $host_cpu in +- powerpc) +- # see comment about AmigaOS4 .so support +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- m68k) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; +- esac +- ;; ++# Old names: ++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) ++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_NM], []) ++dnl AC_DEFUN([AC_PROG_NM], []) + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; + +- mingw* | cygwin* | pw32* | os2* | cegcc*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- m4_if([$1], [GCJ], [], +- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) +- ;; ++# LT_LIB_M ++# -------- ++# check for math library ++AC_DEFUN([LT_LIB_M], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++LIBM= ++case $host in ++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) ++ # These system don't have libm, or don't need it ++ ;; ++*-ncr-sysv4.3*) ++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") ++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ++ ;; ++*) ++ AC_CHECK_LIB(m, cos, LIBM="-lm") ++ ;; ++esac ++AC_SUBST([LIBM]) ++])# LT_LIB_M + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; ++# Old name: ++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_CHECK_LIBM], []) + +- hpux*) +- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit +- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag +- # sets the default TLS model and affects inlining. +- case $host_cpu in +- hppa*64*) +- # +Z the default +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; + +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; ++# _LT_COMPILER_NO_RTTI([TAGNAME]) ++# ------------------------------- ++m4_defun([_LT_COMPILER_NO_RTTI], ++[m4_require([_LT_TAG_COMPILER])dnl + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- enable_shared=no +- ;; +- +- *nto* | *qnx*) +- # QNX uses GNU C++, but need to define -shared option too, otherwise +- # it will coredump. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; ++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; ++if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + +- mingw* | cygwin* | pw32* | os2* | cegcc*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- m4_if([$1], [GCJ], [], +- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) +- ;; ++ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], ++ lt_cv_prog_compiler_rtti_exceptions, ++ [-fno-rtti -fno-exceptions], [], ++ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) ++fi ++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], ++ [Compiler flag to turn off builtin functions]) ++])# _LT_COMPILER_NO_RTTI + +- hpux9* | hpux10* | hpux11*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- ;; + +- irix5* | irix6* | nonstopux*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC (with -KPIC) is the default. +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++# _LT_CMD_GLOBAL_SYMBOLS ++# ---------------------- ++m4_defun([_LT_CMD_GLOBAL_SYMBOLS], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_TAG_COMPILER])dnl + +- linux* | k*bsd*-gnu | kopensolaris*-gnu) +- case $cc_basename in +- # old Intel for x86_64 which still supported -KPIC. +- ecc*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- # icc used to be incompatible with GCC. +- # ICC 10 doesn't accept -KPIC any more. +- icc* | ifort*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- # Lahey Fortran 8.1. +- lf95*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- ccc*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All Alpha code is PIC. +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- xl*) +- # IBM XL C 8.0/Fortran 10.1 on PPC +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='' +- ;; +- esac +- ;; +- esac +- ;; ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++AC_MSG_CHECKING([command to parse $NM output from $compiler object]) ++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], ++[ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +- newsos6) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# Character class describing NM global symbol codes. ++symcode='[[BCDEGRST]]' + +- *nto* | *qnx*) +- # QNX uses GNU C++, but need to define -shared option too, otherwise +- # it will coredump. +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' +- ;; ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +- osf3* | osf4* | osf5*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All OSF/1 code is PIC. +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[[BCDT]]' ++ ;; ++cygwin* | mingw* | pw32* | cegcc*) ++ symcode='[[ABCDGISTW]]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDEGRST]]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[[BCDEGRST]]' ++ ;; ++osf*) ++ symcode='[[BCDEGQRST]]' ++ ;; ++solaris*) ++ symcode='[[BDRT]]' ++ ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; ++sysv4) ++ symcode='[[DFNSTU]]' ++ ;; ++esac + +- rdos*) +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[[ABCDGIRSTW]]' ;; ++esac + +- solaris*) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; +- *) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; +- esac +- ;; ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +- sunos4*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac + +- sysv4*MP*) +- if test -d /usr/nec ;then +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" + +- unicos*) +- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- +- uts4*) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- +- *) +- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK ['"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx]" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi +-]) +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- *) +- _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" +- ;; +-esac +-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], +- [How to pass a linker flag through the compiler]) +- +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then +- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], +- [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], +- [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], +- [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in +- "" | " "*) ;; +- *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; +- esac], +- [_LT_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +-fi +-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], +- [Additional compiler flags for building library objects]) +- +-# +-# Check to make sure the static flag actually works. +-# +-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], +- _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), +- $lt_tmp_static_flag, +- [], +- [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], +- [Compiler flag to prevent dynamic linking]) +-])# _LT_COMPILER_PIC + ++ # Check to see that the pipe works correctly. ++ pipe_works=no + +-# _LT_LINKER_SHLIBS([TAGNAME]) +-# ---------------------------- +-# See if the linker supports building shared libraries. +-m4_defun([_LT_LINKER_SHLIBS], +-[AC_REQUIRE([LT_PATH_LD])dnl +-AC_REQUIRE([LT_PATH_NM])dnl +-m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_DECL_EGREP])dnl +-m4_require([_LT_DECL_SED])dnl +-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +-m4_require([_LT_TAG_COMPILER])dnl +-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-m4_if([$1], [CXX], [ +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix[[4-9]]*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" +- ;; +- cygwin* | mingw* | cegcc*) +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- linux* | k*bsd*-gnu) +- _LT_TAGVAR(link_all_deplibs, $1)=no +- ;; +- *) +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +-], [ +- runpath_var= +- _LT_TAGVAR(allow_undefined_flag, $1)= +- _LT_TAGVAR(always_export_symbols, $1)=no +- _LT_TAGVAR(archive_cmds, $1)= +- _LT_TAGVAR(archive_expsym_cmds, $1)= +- _LT_TAGVAR(compiler_needs_object, $1)=no +- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- _LT_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- _LT_TAGVAR(hardcode_automatic, $1)=no +- _LT_TAGVAR(hardcode_direct, $1)=no +- _LT_TAGVAR(hardcode_direct_absolute, $1)=no +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +- _LT_TAGVAR(hardcode_libdir_separator, $1)= +- _LT_TAGVAR(hardcode_minus_L, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_TAGVAR(inherit_rpath, $1)=no +- _LT_TAGVAR(link_all_deplibs, $1)=unknown +- _LT_TAGVAR(module_cmds, $1)= +- _LT_TAGVAR(module_expsym_cmds, $1)= +- _LT_TAGVAR(old_archive_from_new_cmds, $1)= +- _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= +- _LT_TAGVAR(thread_safe_flag_spec, $1)= +- _LT_TAGVAR(whole_archive_flag_spec, $1)= +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- _LT_TAGVAR(include_expsyms, $1)= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- # Exclude shared library initialization/finalization symbols. +-dnl Note also adjust exclude_expsyms for C++ above. +- extract_expsyms_cmds= +- +- case $host_os in +- cygwin* | mingw* | pw32* | cegcc*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- linux* | k*bsd*-gnu) +- _LT_TAGVAR(link_all_deplibs, $1)=no +- ;; +- esac ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF + +- _LT_TAGVAR(ld_shlibs, $1)=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then +- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>&1` in +- *GNU\ gold*) supports_anon_versioning=yes ;; +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix[[3-9]]*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- _LT_TAGVAR(ld_shlibs, $1)=no +- cat <<_LT_EOF 1>&2 ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++ cat <<_LT_EOF >> conftest.$ac_ext + ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[[]] = ++{ ++ { "@PROGRAM@", (void *) 0 }, + _LT_EOF +- fi +- ;; ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++]) ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ AC_MSG_RESULT(failed) ++else ++ AC_MSG_RESULT(ok) ++fi ++ ++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], ++ [Take the output of nm and produce a listing of raw symbols and C names]) ++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], ++ [Transform the output of nm in a proper C declaration]) ++_LT_DECL([global_symbol_to_c_name_address], ++ [lt_cv_sys_global_symbol_to_c_name_address], [1], ++ [Transform the output of nm in a C name address pair]) ++_LT_DECL([global_symbol_to_c_name_address_lib_prefix], ++ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], ++ [Transform the output of nm in a C name address pair when lib prefix is needed]) ++]) # _LT_CMD_GLOBAL_SYMBOLS ++ ++ ++# _LT_COMPILER_PIC([TAGNAME]) ++# --------------------------- ++m4_defun([_LT_COMPILER_PIC], ++[m4_require([_LT_TAG_COMPILER])dnl ++_LT_TAGVAR(lt_prog_compiler_wl, $1)= ++_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++_LT_TAGVAR(lt_prog_compiler_static, $1)= ++ ++AC_MSG_CHECKING([for $compiler option to produce PIC]) ++m4_if([$1], [CXX], [ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + +- beos*) +- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. + ;; +- +- cygwin* | mingw* | pw32* | cegcc*) +- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_TAGVAR(always_export_symbols, $1)=no +- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' +- +- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi ++ mingw* | cygwin* | os2* | pw32* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; +- + interix[[3-9]]*) +- _LT_TAGVAR(hardcode_direct, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. + ;; +- +- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) +- tmp_diet=no +- if test "$host_os" = linux-dietlibc; then +- case $cc_basename in +- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) +- esac ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi +- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ +- && test "$tmp_diet" = no +- then +- tmp_addflag= +- tmp_sharedflag='-shared' +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' ++ ;; ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ case $host_os in ++ aix[[4-9]]*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- lf95*) # Lahey Fortran 8.1 +- _LT_TAGVAR(whole_archive_flag_spec, $1)= +- tmp_sharedflag='--shared' ;; +- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) +- tmp_sharedflag='-qmkshrobj' +- tmp_addflag= ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' +- _LT_TAGVAR(compiler_needs_object, $1)=yes +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; + esac +- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- +- if test "x$supports_anon_versioning" = xyes; then +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- ++ ;; ++ dgux*) + case $cc_basename in +- xlf*) +- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself +- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' +- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' +- if test "x$supports_anon_versioning" = xyes; then +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- echo "local: *; };" >> $output_objdir/$libname.ver~ +- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' +- fi +- ;; ++ ec++*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; + esac +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- netbsd* | netbsdelf*-gnu) +- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; +- +- solaris*) +- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then +- _LT_TAGVAR(ld_shlibs, $1)=no +- cat <<_LT_EOF 1>&2 +- +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-_LT_EOF +- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) +- _LT_TAGVAR(ld_shlibs, $1)=no +- cat <<_LT_EOF 1>&2 +- +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. +- +-_LT_EOF + ;; +- *) +- # For security reasons, it is highly recommended that you always +- # use absolute paths for naming shared libraries, and exclude the +- # DT_RUNPATH tag from executables and libraries. But doing so +- # requires that you compile everything twice, which is a pain. +- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ + ;; +- esac +- ;; +- +- sunos4*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- *) +- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- +- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then +- runpath_var= +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_TAGVAR(always_export_symbols, $1)=yes +- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- _LT_TAGVAR(hardcode_direct, $1)=unsupported +- fi +- ;; +- +- aix[[4-9]]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ fi ++ ;; ++ aCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; + esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi +- +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- _LT_TAGVAR(archive_cmds, $1)='' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- _LT_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' +- +- if test "$GCC" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && +- strings "$collect2name" | $GREP resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- ;; ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; + esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- _LT_TAGVAR(link_all_deplibs, $1)=no +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi +- +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an +- # empty executable. +- _LT_SYS_MODULE_PATH_AIX +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an +- # empty executable. +- _LT_SYS_MODULE_PATH_AIX +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi ++ ;; ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ ecpc* ) ++ # old Intel C++ for x86_64 which still supported -KPIC. ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ icpc* ) ++ # Intel C++, used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xlc* | xlC*) ++ # IBM XL 8.0 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ esac ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + +@@ -4693,1623 +4554,1803 @@ + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + +- bsdi[[45]]*) +- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. + ;; + +- cygwin* | mingw* | pw32* | cegcc*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' +- # FIXME: Should let the user specify the lib program. +- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' +- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' +- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) +- _LT_DARWIN_LINKER_FEATURES($1) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + +- dgux*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ hpux*) ++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit ++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag ++ # sets the default TLS model and affects inlining. ++ case $host_cpu in ++ hppa*64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac + ;; + +- freebsd1*) +- _LT_TAGVAR(ld_shlibs, $1)=no ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. + ;; + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ enable_shared=no + ;; + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi + ;; + +- hpux9*) +- if test "$GCC" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_TAGVAR(hardcode_direct, $1)=yes ++ ;; + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ mingw* | cygwin* | pw32* | os2* | cegcc*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- fi ++ hpux9* | hpux10* | hpux11*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ irix5* | irix6* | nonstopux*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # PIC (with -KPIC) is the default. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ # old Intel for x86_64 which still supported -KPIC. ++ ecc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ # icc used to be incompatible with GCC. ++ # ICC 10 doesn't accept -KPIC any more. ++ icc* | ifort*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ # Lahey Fortran 8.1. ++ lf95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ccc*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All Alpha code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + esac +- fi +- if test "$with_gnu_ld" = no; then +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; ++ esac ++ ;; + +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_TAGVAR(hardcode_direct, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- *) +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ newsos6) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- ;; +- esac +- fi ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- # Try to use the -exported_symbol ld option, if it does not +- # work, assume that -exports_file does not work either and +- # implicitly export all symbols. +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" +- AC_LINK_IFELSE(int foo(void) {}, +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' +- ) +- LDFLAGS="$save_LDFLAGS" +- else +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' +- fi +- _LT_TAGVAR(archive_cmds_need_lc, $1)='no' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_TAGVAR(inherit_rpath, $1)=yes +- _LT_TAGVAR(link_all_deplibs, $1)=yes ++ osf3* | osf4* | osf5*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + +- netbsd* | netbsdelf*-gnu) +- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ rdos*) ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + +- newsos6) +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ solaris*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac + ;; + +- *nto* | *qnx*) ++ sunos4*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- else +- case $host_os in +- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- _LT_TAGVAR(ld_shlibs, $1)=no ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + +- os2*) +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ ++ uts4*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac ++AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) ++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], ++ [How to pass a linker flag through the compiler]) ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], ++ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], ++ [Additional compiler flags for building library objects]) ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" ++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) ++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], ++ [Compiler flag to prevent dynamic linking]) ++])# _LT_COMPILER_PIC ++ ++ ++# _LT_LINKER_SHLIBS([TAGNAME]) ++# ---------------------------- ++# See if the linker supports building shared libraries. ++m4_defun([_LT_LINKER_SHLIBS], ++[AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++m4_if([$1], [CXX], [ ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix[[4-9]]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ++ ;; ++ cygwin* | mingw* | cegcc*) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++], [ ++ runpath_var= ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(archive_cmds, $1)= ++ _LT_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_TAGVAR(compiler_needs_object, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(hardcode_automatic, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(inherit_rpath, $1)=no ++ _LT_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_TAGVAR(module_cmds, $1)= ++ _LT_TAGVAR(module_expsym_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. ++ extract_expsyms_cmds= ++ ++ case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ esac + +- osf3*) +- if test "$GCC" = yes; then +- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- _LT_TAGVAR(archive_cmds_need_lc, $1)='no' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- else +- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ +- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *GNU\ gold*) supports_anon_versioning=yes ;; ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac + +- # Both c and cxx compiler support -rpath directly +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- fi +- _LT_TAGVAR(archive_cmds_need_lc, $1)='no' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[[3-9]]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +- solaris*) +- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' +- else +- case `$CC -V 2>&1` in +- *"Compilers 5.0"*) +- wlarc='' +- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' +- ;; +- *) +- wlarc='${wl}' +- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' +- ;; +- esac +- fi +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- ;; ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++_LT_EOF + fi +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- sysv4) +- case $host_vendor in +- sni) +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' +- _LT_TAGVAR(hardcode_direct, $1)=no ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; +- motorola) +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie +- ;; + esac +- runpath_var='LD_RUN_PATH' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- +- sysv4.3*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- _LT_TAGVAR(ld_shlibs, $1)=yes +- fi +- ;; +- +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi + ;; + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else +- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + +- uts4*) +- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + +- *) +- _LT_TAGVAR(ld_shlibs, $1)=no ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi + ;; +- esac +- +- if test x$host_vendor = xsni; then +- case $host in +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' +- ;; +- esac +- fi +- fi +-]) +-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- +-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +-_LT_DECL([], [extract_expsyms_cmds], [2], +- [The commands to extract the exported symbol list from a shared archive]) +- +-# +-# Do we need to explicitly link libc? +-# +-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +-x|xyes) +- # Assume -lc should be added +- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes +- +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $_LT_TAGVAR(archive_cmds, $1) in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) +- $RM conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) +- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) +- _LT_TAGVAR(allow_undefined_flag, $1)= +- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) +- then +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- else +- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes +- fi +- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 ++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac + fi +- $RM conftest* +- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) +- ;; +- esac +- fi +- ;; +-esac ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ lf95*) # Lahey Fortran 8.1 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ tmp_sharedflag='--shared' ;; ++ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], +- [Whether or not to add -lc for building shared libraries]) +-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], +- [enable_shared_with_static_runtimes], [0], +- [Whether or not to disallow shared libs when runtime libs are static]) +-_LT_TAGDECL([], [export_dynamic_flag_spec], [1], +- [Compiler flag to allow reflexive dlopens]) +-_LT_TAGDECL([], [whole_archive_flag_spec], [1], +- [Compiler flag to generate shared objects directly from archives]) +-_LT_TAGDECL([], [compiler_needs_object], [1], +- [Whether the compiler copes with passing no objects directly]) +-_LT_TAGDECL([], [old_archive_from_new_cmds], [2], +- [Create an old-style archive from a shared archive]) +-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], +- [Create a temporary old-style archive to link instead of a shared archive]) +-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +-_LT_TAGDECL([], [archive_expsym_cmds], [2]) +-_LT_TAGDECL([], [module_cmds], [2], +- [Commands used to build a loadable module if different from building +- a shared archive.]) +-_LT_TAGDECL([], [module_expsym_cmds], [2]) +-_LT_TAGDECL([], [with_gnu_ld], [1], +- [Whether we are building with GNU ld or not]) +-_LT_TAGDECL([], [allow_undefined_flag], [1], +- [Flag that allows shared libraries with undefined symbols to be built]) +-_LT_TAGDECL([], [no_undefined_flag], [1], +- [Flag that enforces no undefined symbols]) +-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], +- [Flag to hardcode $libdir into a binary during linking. +- This must work even if $libdir does not exist]) +-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], +- [[If ld is used when linking, flag to hardcode $libdir into a binary +- during linking. This must work even if $libdir does not exist]]) +-_LT_TAGDECL([], [hardcode_libdir_separator], [1], +- [Whether we need a single "-rpath" flag with a separated argument]) +-_LT_TAGDECL([], [hardcode_direct], [0], +- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes +- DIR into the resulting binary]) +-_LT_TAGDECL([], [hardcode_direct_absolute], [0], +- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes +- DIR into the resulting binary and the resulting library dependency is +- "absolute", i.e impossible to change by setting ${shlibpath_var} if the +- library is relocated]) +-_LT_TAGDECL([], [hardcode_minus_L], [0], +- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR +- into the resulting binary]) +-_LT_TAGDECL([], [hardcode_shlibpath_var], [0], +- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +- into the resulting binary]) +-_LT_TAGDECL([], [hardcode_automatic], [0], +- [Set to "yes" if building a shared library automatically hardcodes DIR +- into the library and all subsequent libraries and executables linked +- against it]) +-_LT_TAGDECL([], [inherit_rpath], [0], +- [Set to yes if linker adds runtime paths of dependent libraries +- to runtime path list]) +-_LT_TAGDECL([], [link_all_deplibs], [0], +- [Whether libtool must link a program against all its dependency libraries]) +-_LT_TAGDECL([], [fix_srcfile_path], [1], +- [Fix the shell variable $srcfile for the compiler]) +-_LT_TAGDECL([], [always_export_symbols], [0], +- [Set to "yes" if exported symbols are required]) +-_LT_TAGDECL([], [export_symbols_cmds], [2], +- [The commands to list exported symbols]) +-_LT_TAGDECL([], [exclude_expsyms], [1], +- [Symbols that should not be listed in the preloaded symbols]) +-_LT_TAGDECL([], [include_expsyms], [1], +- [Symbols that must always be exported]) +-_LT_TAGDECL([], [prelink_cmds], [2], +- [Commands necessary for linking programs (against libraries) with templates]) +-_LT_TAGDECL([], [file_list_spec], [1], +- [Specify filename containing input files]) +-dnl FIXME: Not yet implemented +-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +-dnl [Compiler flag to generate thread safe objects]) +-])# _LT_LINKER_SHLIBS ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + +-# _LT_LANG_C_CONFIG([TAG]) +-# ------------------------ +-# Ensure that the configuration variables for a C compiler are suitably +-# defined. These variables are subsequently used by _LT_CONFIG to write +-# the compiler configuration to `libtool'. +-m4_defun([_LT_LANG_C_CONFIG], +-[m4_require([_LT_DECL_EGREP])dnl +-lt_save_CC="$CC" +-AC_LANG_PUSH(C) ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +-# Source file extension for C test sources. +-ac_ext=c ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-# Object file extension for compiled C test sources. +-objext=o +-_LT_TAGVAR(objext, $1)=$objext ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}' ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-_LT_TAG_COMPILER +-# Save the default compiler, since it gets overwritten when the other +-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +-compiler_DEFAULT=$CC ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE ++ sunos4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-if test -n "$compiler"; then +- _LT_COMPILER_NO_RTTI($1) +- _LT_COMPILER_PIC($1) +- _LT_COMPILER_C_O($1) +- _LT_COMPILER_FILE_LOCKS($1) +- _LT_LINKER_SHLIBS($1) +- _LT_SYS_DYNAMIC_LINKER($1) +- _LT_LINKER_HARDCODE_LIBPATH($1) +- LT_SYS_DLOPEN_SELF +- _LT_CMD_STRIPLIB ++ *) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac + +- # Report which library types will actually be built +- AC_MSG_CHECKING([if libtool supports shared libraries]) +- AC_MSG_RESULT([$can_build_shared]) ++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; + +- AC_MSG_CHECKING([whether to build shared libraries]) +- test "$can_build_shared" = "no" && enable_shared=no ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no + +- # On AIX, shared libraries and static libraries use the same namespace, and +- # are all built from PIC. +- case $host_os in +- aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac + +- aix[[4-9]]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +- esac +- AC_MSG_RESULT([$enable_shared]) ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +- AC_MSG_CHECKING([whether to build static libraries]) +- # Make sure either enable_shared or enable_static is yes. +- test "$enable_shared" = yes || enable_static=yes +- AC_MSG_RESULT([$enable_static]) ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- _LT_CONFIG($1) +-fi +-AC_LANG_POP +-CC="$lt_save_CC" +-])# _LT_LANG_C_CONFIG ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +-# _LT_PROG_CXX +-# ------------ +-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ +-# compiler, we have our own version here. +-m4_defun([_LT_PROG_CXX], +-[ +-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) +-AC_PROG_CXX +-if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_PROG_CXXCPP +-else +- _lt_caught_CXX_error=yes +-fi +-popdef([AC_MSG_ERROR]) +-])# _LT_PROG_CXX ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([_LT_PROG_CXX], []) ++ bsdi[[45]]*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; + ++ cygwin* | mingw* | pw32* | cegcc*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; + +-# _LT_LANG_CXX_CONFIG([TAG]) +-# -------------------------- +-# Ensure that the configuration variables for a C++ compiler are suitably +-# defined. These variables are subsequently used by _LT_CONFIG to write +-# the compiler configuration to `libtool'. +-m4_defun([_LT_LANG_CXX_CONFIG], +-[AC_REQUIRE([_LT_PROG_CXX])dnl +-m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-m4_require([_LT_DECL_EGREP])dnl ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; + +-AC_LANG_PUSH(C++) +-_LT_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_TAGVAR(allow_undefined_flag, $1)= +-_LT_TAGVAR(always_export_symbols, $1)=no +-_LT_TAGVAR(archive_expsym_cmds, $1)= +-_LT_TAGVAR(compiler_needs_object, $1)=no +-_LT_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_TAGVAR(hardcode_direct, $1)=no +-_LT_TAGVAR(hardcode_direct_absolute, $1)=no +-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_TAGVAR(hardcode_minus_L, $1)=no +-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +-_LT_TAGVAR(hardcode_automatic, $1)=no +-_LT_TAGVAR(inherit_rpath, $1)=no +-_LT_TAGVAR(module_cmds, $1)= +-_LT_TAGVAR(module_expsym_cmds, $1)= +-_LT_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_TAGVAR(no_undefined_flag, $1)= +-_LT_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ dgux*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Source file extension for C++ test sources. +-ac_ext=cpp ++ freebsd1*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-# Object file extension for compiled C++ test sources. +-objext=o +-_LT_TAGVAR(objext, $1)=$objext ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# No sense in running all these tests if we already determined that +-# the CXX compiler isn't working. Some variables (like enable_shared) +-# are currently assumed to apply to all compilers on this platform, +-# and will be corrupted by setting them based on a non-working compiler. +-if test "$_lt_caught_CXX_error" != yes; then +- # Code to be used in simple compile tests +- lt_simple_compile_test_code="int some_variable = 0;" ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- # Code to be used in simple link tests +- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- # ltmain only uses $CC for tagged configurations so make sure $CC is set. +- _LT_TAG_COMPILER ++ hpux9*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes + +- # save warnings/boilerplate of simple test code +- _LT_COMPILER_BOILERPLATE +- _LT_LINKER_BOILERPLATE ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; + +- # Allow CC to be a program name with arguments. +- lt_save_CC=$CC +- lt_save_LD=$LD +- lt_save_GCC=$GCC +- GCC=$GXX +- lt_save_with_gnu_ld=$with_gnu_ld +- lt_save_path_LD=$lt_cv_path_LD +- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +- else +- $as_unset lt_cv_prog_gnu_ld +- fi +- if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX +- else +- $as_unset lt_cv_path_LD +- fi +- test -z "${LDCXX+set}" || LD=$LDCXX +- CC=${CXX-"c++"} +- compiler=$CC +- _LT_TAGVAR(compiler, $1)=$CC +- _LT_CC_BASENAME([$compiler]) ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; + +- if test -n "$compiler"; then +- # We don't want -fno-exception when compiling C++ code, so set the +- # no_builtin_flag separately +- if test "$GXX" = yes; then +- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +- else +- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +- fi ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +- if test "$GXX" = yes; then +- # Set up default GNU C++ configuration ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + +- LT_PATH_LD ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ fi ++ ;; + +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ AC_LINK_IFELSE(int foo(void) {}, ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ) ++ LDFLAGS="$save_LDFLAGS" ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' ++ newsos6) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | +- $GREP 'no-whole-archive' > /dev/null; then +- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_TAGVAR(whole_archive_flag_spec, $1)= +- fi ++ *nto* | *qnx*) ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi + else +- with_gnu_ld=no +- wlarc= ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +- # A generic and very simple default shared library creation +- # command for GNU C++ for the case where it uses the native +- # linker, instead of GNU ld. If possible, this setting should +- # overridden to take advantage of the native linker features on +- # the platform it is being used on. +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ os2*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + +- else +- GXX=no +- with_gnu_ld=no +- wlarc= +- fi ++ # Both c and cxx compiler support -rpath directly ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; + +- # PORTME: fill in a description of your system's C++ link characteristics +- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +- _LT_TAGVAR(ld_shlibs, $1)=yes +- case $host_os in +- aix3*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- aix[[4-9]]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no ++ solaris*) ++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) +- aix_use_runtimelinking=yes +- break +- ;; +- esac +- done +- ;; +- esac ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++ sysv4) ++ case $host_vendor in ++ sni) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ ;; ++ motorola) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ sysv4.3*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ++ ;; + +- _LT_TAGVAR(archive_cmds, $1)='' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- _LT_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ fi ++ ;; + +- if test "$GXX" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && +- strings "$collect2name" | $GREP resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' + +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to +- # export. +- _LT_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty +- # executable. +- _LT_SYS_MODULE_PATH_AIX +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an +- # empty executable. +- _LT_SYS_MODULE_PATH_AIX +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared +- # libraries. +- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' + +- beos*) +- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; ++ uts4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +- cygwin* | mingw* | pw32* | cegcc*) +- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_TAGVAR(always_export_symbols, $1)=no +- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ *) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac + +- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- darwin* | rhapsody*) +- _LT_DARWIN_LINKER_FEATURES($1) ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; ++ esac ++ fi ++ fi ++]) ++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +- dgux*) +- case $cc_basename in +- ec++*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- +- freebsd[[12]]*) +- # C++ shared libraries reported to be fairly broken before +- # switch to ELF +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; ++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +- freebsd-elf*) +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- ;; ++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl ++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl ++_LT_DECL([], [extract_expsyms_cmds], [2], ++ [The commands to extract the exported symbol list from a shared archive]) + +- freebsd* | dragonfly*) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- _LT_TAGVAR(ld_shlibs, $1)=yes +- ;; ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + +- gnu*) +- ;; ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- hpux9*) +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ++ ;; ++ esac ++ fi ++ ;; ++esac + +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC*) +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' +- ;; +- *) +- if test "$GXX" = yes; then +- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; ++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], ++ [Whether or not to add -lc for building shared libraries]) ++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], ++ [enable_shared_with_static_runtimes], [0], ++ [Whether or not to disallow shared libs when runtime libs are static]) ++_LT_TAGDECL([], [export_dynamic_flag_spec], [1], ++ [Compiler flag to allow reflexive dlopens]) ++_LT_TAGDECL([], [whole_archive_flag_spec], [1], ++ [Compiler flag to generate shared objects directly from archives]) ++_LT_TAGDECL([], [compiler_needs_object], [1], ++ [Whether the compiler copes with passing no objects directly]) ++_LT_TAGDECL([], [old_archive_from_new_cmds], [2], ++ [Create an old-style archive from a shared archive]) ++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], ++ [Create a temporary old-style archive to link instead of a shared archive]) ++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) ++_LT_TAGDECL([], [archive_expsym_cmds], [2]) ++_LT_TAGDECL([], [module_cmds], [2], ++ [Commands used to build a loadable module if different from building ++ a shared archive.]) ++_LT_TAGDECL([], [module_expsym_cmds], [2]) ++_LT_TAGDECL([], [with_gnu_ld], [1], ++ [Whether we are building with GNU ld or not]) ++_LT_TAGDECL([], [allow_undefined_flag], [1], ++ [Flag that allows shared libraries with undefined symbols to be built]) ++_LT_TAGDECL([], [no_undefined_flag], [1], ++ [Flag that enforces no undefined symbols]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], ++ [Flag to hardcode $libdir into a binary during linking. ++ This must work even if $libdir does not exist]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], ++ [[If ld is used when linking, flag to hardcode $libdir into a binary ++ during linking. This must work even if $libdir does not exist]]) ++_LT_TAGDECL([], [hardcode_libdir_separator], [1], ++ [Whether we need a single "-rpath" flag with a separated argument]) ++_LT_TAGDECL([], [hardcode_direct], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary]) ++_LT_TAGDECL([], [hardcode_direct_absolute], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary and the resulting library dependency is ++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the ++ library is relocated]) ++_LT_TAGDECL([], [hardcode_minus_L], [0], ++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_shlibpath_var], [0], ++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_automatic], [0], ++ [Set to "yes" if building a shared library automatically hardcodes DIR ++ into the library and all subsequent libraries and executables linked ++ against it]) ++_LT_TAGDECL([], [inherit_rpath], [0], ++ [Set to yes if linker adds runtime paths of dependent libraries ++ to runtime path list]) ++_LT_TAGDECL([], [link_all_deplibs], [0], ++ [Whether libtool must link a program against all its dependency libraries]) ++_LT_TAGDECL([], [fix_srcfile_path], [1], ++ [Fix the shell variable $srcfile for the compiler]) ++_LT_TAGDECL([], [always_export_symbols], [0], ++ [Set to "yes" if exported symbols are required]) ++_LT_TAGDECL([], [export_symbols_cmds], [2], ++ [The commands to list exported symbols]) ++_LT_TAGDECL([], [exclude_expsyms], [1], ++ [Symbols that should not be listed in the preloaded symbols]) ++_LT_TAGDECL([], [include_expsyms], [1], ++ [Symbols that must always be exported]) ++_LT_TAGDECL([], [prelink_cmds], [2], ++ [Commands necessary for linking programs (against libraries) with templates]) ++_LT_TAGDECL([], [file_list_spec], [1], ++ [Specify filename containing input files]) ++dnl FIXME: Not yet implemented ++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], ++dnl [Compiler flag to generate thread safe objects]) ++])# _LT_LINKER_SHLIBS + +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +- case $host_cpu in +- hppa*64*|ia64*) +- ;; +- *) +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- ;; +- esac +- fi +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_TAGVAR(hardcode_direct, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- *) +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- ;; +- esac ++# _LT_LANG_C_CONFIG([TAG]) ++# ------------------------ ++# Ensure that the configuration variables for a C compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_C_CONFIG], ++[m4_require([_LT_DECL_EGREP])dnl ++lt_save_CC="$CC" ++AC_LANG_PUSH(C) + +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC*) +- case $host_cpu in +- hppa*64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' +- ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then +- case $host_cpu in +- hppa*64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- fi +- else +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; ++# Source file extension for C test sources. ++ac_ext=c + +- interix[[3-9]]*) +- _LT_TAGVAR(hardcode_direct, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC*) +- # SGI C++ +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++# Object file extension for compiled C test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' +- ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' +- fi +- fi +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- ;; +- esac +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_TAGVAR(inherit_rpath, $1)=yes +- ;; ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" + +- linux* | k*bsd*-gnu | kopensolaris*-gnu) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' + +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++_LT_TAG_COMPILER ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc* | ecpc* ) +- # Intel C++ +- with_gnu_ld=yes +- # version 8.0 and above of icpc choke on multiply defined symbols +- # if we add $predep_objects and $postdep_objects, however 7.1 and +- # earlier do not add the objects themselves. +- case `$CC -V 2>&1` in +- *"Version 7."*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- *) # Version 8.0 or newer +- tmp_idyn= +- case $host_cpu in +- ia64*) tmp_idyn=' -i_dynamic';; +- esac +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- esac +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- pgCC* | pgcpp*) +- # Portland Group C++ compiler +- case `$CC -V` in +- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) +- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ +- rm -rf $tpldir~ +- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ +- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' +- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ +- rm -rf $tpldir~ +- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ +- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ +- $RANLIB $oldlib' +- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ +- rm -rf $tpldir~ +- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ +- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ +- rm -rf $tpldir~ +- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ +- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' +- ;; +- *) # Version 6 will use weak symbols +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' +- ;; +- esac ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ LT_SYS_DLOPEN_SELF ++ _LT_CMD_STRIPLIB + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' +- ;; +- cxx*) +- # Compaq C++ +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ # Report which library types will actually be built ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) + +- runpath_var=LD_RUN_PATH +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' +- ;; +- xl*) +- # IBM XL 8.0 on PPC, with GNU ld +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- if test "x$supports_anon_versioning" = xyes; then +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' +- _LT_TAGVAR(compiler_needs_object, $1)=yes ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; + +- # Not sure whether something based on +- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 +- # would be better. +- output_verbose_link_cmd='echo' ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) + +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; +- esac +- ;; +- esac +- ;; ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) + +- lynxos*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; ++ _LT_CONFIG($1) ++fi ++AC_LANG_POP ++CC="$lt_save_CC" ++])# _LT_LANG_C_CONFIG + +- m88k*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; + +- mvs*) +- case $cc_basename in +- cxx*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; ++# _LT_PROG_CXX ++# ------------ ++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ ++# compiler, we have our own version here. ++m4_defun([_LT_PROG_CXX], ++[ ++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) ++AC_PROG_CXX ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++else ++ _lt_caught_CXX_error=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_CXX + +- netbsd*) +- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_CXX], []) + +- *nto* | *qnx*) +- _LT_TAGVAR(ld_shlibs, $1)=yes +- ;; + +- openbsd2*) +- # C++ shared libraries are fairly broken +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; ++# _LT_LANG_CXX_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a C++ compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_CXX_CONFIG], ++[AC_REQUIRE([_LT_PROG_CXX])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_TAGVAR(hardcode_direct, $1)=yes +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- fi +- output_verbose_link_cmd=echo +- else +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++AC_LANG_PUSH(C++) ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(compiler_needs_object, $1)=no ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler ++# Source file extension for C++ test sources. ++ac_ext=cpp + +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++# Object file extension for compiled C++ test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++# No sense in running all these tests if we already determined that ++# the CXX compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_caught_CXX_error" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="int some_variable = 0;" + +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- case $host in +- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; +- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; +- esac +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx*) +- case $host in +- osf3*) +- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- ;; +- *) +- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ +- $RM $lib.exp' +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- ;; +- esac ++ # Code to be used in simple link tests ++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- case $host in +- osf3*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- ;; +- esac ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ # Allow CC to be a program name with arguments. ++ lt_save_CC=$CC ++ lt_save_LD=$LD ++ lt_save_GCC=$GCC ++ GCC=$GXX ++ lt_save_with_gnu_ld=$with_gnu_ld ++ lt_save_path_LD=$lt_cv_path_LD ++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++ else ++ $as_unset lt_cv_prog_gnu_ld ++ fi ++ if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++ else ++ $as_unset lt_cv_path_LD ++ fi ++ test -z "${LDCXX+set}" || LD=$LDCXX ++ CC=${CXX-"c++"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ if test -n "$compiler"; then ++ # We don't want -fno-exception when compiling C++ code, so set the ++ # no_builtin_flag separately ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ else ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ fi + +- else +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; ++ if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration + +- psos*) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; ++ LT_PATH_LD + +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- lcc*) +- # Lucid +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes +- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' +- ;; +- esac +- _LT_TAGVAR(link_all_deplibs, $1)=yes ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | ++ $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi + +- output_verbose_link_cmd='echo' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++ fi + +- # The C++ compiler must be used to create the archive. +- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ # PORTME: fill in a description of your system's C++ link characteristics ++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done + ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' +- if $CC --version | $GREP -v '^2\.7' > /dev/null; then +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ esac + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' +- fi ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- ;; +- esac ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' + fi +- ;; +- esac ++ fi ++ fi ++ ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to ++ # export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty ++ # executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared ++ # libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi + ;; + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +- case $cc_basename in +- CC*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- esac +- ;; ++ esac ++ ;; + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' +- _LT_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_TAGVAR(link_all_deplibs, $1)=yes +- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' ++ cygwin* | mingw* | pw32* | cegcc*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + +- case $cc_basename in +- CC*) +- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; + +- tandem*) ++ dgux*) + case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 ++ ec++*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; +@@ -6320,538 +6361,644 @@ + esac + ;; + +- vxworks*) +- # FIXME: insert proper C++ library support ++ freebsd[[12]]*) ++ # C++ shared libraries reported to be fairly broken before ++ # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + +- *) +- # FIXME: insert proper C++ library support +- _LT_TAGVAR(ld_shlibs, $1)=no ++ freebsd-elf*) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; +- esac +- +- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- +- _LT_TAGVAR(GCC, $1)="$GXX" +- _LT_TAGVAR(LD, $1)="$LD" +- +- ## CAVEAT EMPTOR: +- ## There is no encapsulation within the following macros, do not change +- ## the running order or otherwise move them around unless you know exactly +- ## what you are doing... +- _LT_SYS_HIDDEN_LIBDEPS($1) +- _LT_COMPILER_PIC($1) +- _LT_COMPILER_C_O($1) +- _LT_COMPILER_FILE_LOCKS($1) +- _LT_LINKER_SHLIBS($1) +- _LT_SYS_DYNAMIC_LINKER($1) +- _LT_LINKER_HARDCODE_LIBPATH($1) +- +- _LT_CONFIG($1) +- fi # test -n "$compiler" +- +- CC=$lt_save_CC +- LDCXX=$LD +- LD=$lt_save_LD +- GCC=$lt_save_GCC +- with_gnu_ld=$lt_save_with_gnu_ld +- lt_cv_path_LDCXX=$lt_cv_path_LD +- lt_cv_path_LD=$lt_save_path_LD +- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +-fi # test "$_lt_caught_CXX_error" != yes +- +-AC_LANG_POP +-])# _LT_LANG_CXX_CONFIG +- +- +-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +-# --------------------------------- +-# Figure out "hidden" library dependencies from verbose +-# compiler output when linking a shared library. +-# Parse the compiler output and extract the necessary +-# objects, libraries and library flags. +-m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +-# Dependencies to place before and after the object being linked: +-_LT_TAGVAR(predep_objects, $1)= +-_LT_TAGVAR(postdep_objects, $1)= +-_LT_TAGVAR(predeps, $1)= +-_LT_TAGVAR(postdeps, $1)= +-_LT_TAGVAR(compiler_lib_search_path, $1)= +- +-dnl we can't use the lt_simple_compile_test_code here, +-dnl because it contains code intended for an executable, +-dnl not a library. It's possible we should let each +-dnl tag define a new lt_????_link_test_code variable, +-dnl but it's only used here... +-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +-int a; +-void foo (void) { a = 0; } +-_LT_EOF +-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +-class Foo +-{ +-public: +- Foo (void) { a = 0; } +-private: +- int a; +-}; +-_LT_EOF +-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF +- subroutine foo +- implicit none +- integer*4 a +- a=0 +- return +- end +-_LT_EOF +-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF +- subroutine foo +- implicit none +- integer a +- a=0 +- return +- end +-_LT_EOF +-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +-public class foo { +- private int a; +- public void bar (void) { +- a = 0; +- } +-}; +-_LT_EOF +-]) +-dnl Parse the compiler output and extract the necessary +-dnl objects, libraries and library flags. +-if AC_TRY_EVAL(ac_compile); then +- # Parse the compiler output and extract the necessary +- # objects, libraries and library flags. +- +- # Sentinel used to keep track of whether or not we are before +- # the conftest object file. +- pre_test_object_deps_done=no +- +- for p in `eval "$output_verbose_link_cmd"`; do +- case $p in +- +- -L* | -R* | -l*) +- # Some compilers place space between "-{L,R}" and the path. +- # Remove the space. +- if test $p = "-L" || +- test $p = "-R"; then +- prev=$p +- continue +- else +- prev= +- fi +- +- if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) +- # Internal compiler library paths should come after those +- # provided the user. The postdeps already come after the +- # user supplied libs so there is no need to process them. +- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then +- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" +- else +- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" +- fi +- ;; +- # The "-l" case would never come before the object being +- # linked, so don't bother handling this case. +- esac +- else +- if test -z "$_LT_TAGVAR(postdeps, $1)"; then +- _LT_TAGVAR(postdeps, $1)="${prev}${p}" +- else +- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" +- fi +- fi +- ;; +- +- *.$objext) +- # This assumes that the test object file only shows up +- # once in the compiler output. +- if test "$p" = "conftest.$objext"; then +- pre_test_object_deps_done=yes +- continue +- fi +- +- if test "$pre_test_object_deps_done" = no; then +- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then +- _LT_TAGVAR(predep_objects, $1)="$p" +- else +- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" +- fi +- else +- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then +- _LT_TAGVAR(postdep_objects, $1)="$p" +- else +- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" +- fi +- fi +- ;; +- +- *) ;; # Ignore the rest. + +- esac +- done +- +- # Clean up. +- rm -f a.out a.exe +-else +- echo "libtool.m4: error: problem compiling $1 test program" +-fi ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; + +-$RM -f confest.$objext ++ gnu*) ++ ;; + +-# PORTME: override above test on systems where it is broken +-m4_if([$1], [CXX], +-[case $host_os in +-interix[[3-9]]*) +- # Interix 3.5 installs completely hosed .la files for C++, so rather than +- # hack all around it, let's just trust "g++" to DTRT. +- _LT_TAGVAR(predep_objects,$1)= +- _LT_TAGVAR(postdep_objects,$1)= +- _LT_TAGVAR(postdeps,$1)= +- ;; ++ hpux9*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. + +-linux*) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +- if test "$solaris_use_stlport4" != yes; then +- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac + +-solaris*) +- case $cc_basename in +- CC*) +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +- # Adding this requires a known-good setup of shared libraries for +- # Sun compiler versions before 5.6, else PIC objects from an old +- # archive will be linked into the output, leading to subtle bugs. +- if test "$solaris_use_stlport4" != yes; then +- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +-esac +-]) ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + +-case " $_LT_TAGVAR(postdeps, $1) " in +-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +-esac +- _LT_TAGVAR(compiler_lib_search_dirs, $1)= +-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then +- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +-fi +-_LT_TAGDECL([], [compiler_lib_search_dirs], [1], +- [The directories searched by this compiler when creating a shared library]) +-_LT_TAGDECL([], [predep_objects], [1], +- [Dependencies to place before and after the objects being linked to +- create a shared library]) +-_LT_TAGDECL([], [postdep_objects], [1]) +-_LT_TAGDECL([], [predeps], [1]) +-_LT_TAGDECL([], [postdeps], [1]) +-_LT_TAGDECL([], [compiler_lib_search_path], [1], +- [The library search path used internally by the compiler when linking +- a shared library]) +-])# _LT_SYS_HIDDEN_LIBDEPS ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' ++ fi ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ esac ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ ;; + ++ linux* | k*bsd*-gnu | kopensolaris*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler + +-# _LT_PROG_F77 +-# ------------ +-# Since AC_PROG_F77 is broken, in that it returns the empty string +-# if there is no fortran compiler, we have our own version here. +-m4_defun([_LT_PROG_F77], +-[ +-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) +-AC_PROG_F77 +-if test -z "$F77" || test "X$F77" = "Xno"; then +- _lt_disable_F77=yes +-fi +-popdef([AC_MSG_ERROR]) +-])# _LT_PROG_F77 ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([_LT_PROG_F77], []) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ case `$CC -V` in ++ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) ++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ ++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $RANLIB $oldlib' ++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ *) # Version 6 will use weak symbols ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ esac + ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + +-# _LT_LANG_F77_CONFIG([TAG]) +-# -------------------------- +-# Ensure that the configuration variables for a Fortran 77 compiler are +-# suitably defined. These variables are subsequently used by _LT_CONFIG +-# to write the compiler configuration to `libtool'. +-m4_defun([_LT_LANG_F77_CONFIG], +-[AC_REQUIRE([_LT_PROG_F77])dnl +-AC_LANG_PUSH(Fortran 77) ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +-_LT_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_TAGVAR(allow_undefined_flag, $1)= +-_LT_TAGVAR(always_export_symbols, $1)=no +-_LT_TAGVAR(archive_expsym_cmds, $1)= +-_LT_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_TAGVAR(hardcode_direct, $1)=no +-_LT_TAGVAR(hardcode_direct_absolute, $1)=no +-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_TAGVAR(hardcode_minus_L, $1)=no +-_LT_TAGVAR(hardcode_automatic, $1)=no +-_LT_TAGVAR(inherit_rpath, $1)=no +-_LT_TAGVAR(module_cmds, $1)= +-_LT_TAGVAR(module_expsym_cmds, $1)= +-_LT_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_TAGVAR(no_undefined_flag, $1)= +-_LT_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ xl*) ++ # IBM XL 8.0 on PPC, with GNU ld ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes + +-# Source file extension for f77 test sources. +-ac_ext=f ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' + +-# Object file extension for compiled f77 test sources. +-objext=o +-_LT_TAGVAR(objext, $1)=$objext ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; ++ esac ++ ;; + +-# No sense in running all these tests if we already determined that +-# the F77 compiler isn't working. Some variables (like enable_shared) +-# are currently assumed to apply to all compilers on this platform, +-# and will be corrupted by setting them based on a non-working compiler. +-if test "$_lt_disable_F77" != yes; then +- # Code to be used in simple compile tests +- lt_simple_compile_test_code="\ +- subroutine t +- return +- end +-" ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +- # Code to be used in simple link tests +- lt_simple_link_test_code="\ +- program t +- end +-" ++ m88k*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +- # ltmain only uses $CC for tagged configurations so make sure $CC is set. +- _LT_TAG_COMPILER ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; + +- # save warnings/boilerplate of simple test code +- _LT_COMPILER_BOILERPLATE +- _LT_LINKER_BOILERPLATE ++ netbsd*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; + +- # Allow CC to be a program name with arguments. +- lt_save_CC="$CC" +- lt_save_GCC=$GCC +- CC=${F77-"f77"} +- compiler=$CC +- _LT_TAGVAR(compiler, $1)=$CC +- _LT_CC_BASENAME([$compiler]) +- GCC=$G77 +- if test -n "$compiler"; then +- AC_MSG_CHECKING([if libtool supports shared libraries]) +- AC_MSG_RESULT([$can_build_shared]) ++ *nto* | *qnx*) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; + +- AC_MSG_CHECKING([whether to build shared libraries]) +- test "$can_build_shared" = "no" && enable_shared=no ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +- # On AIX, shared libraries and static libraries use the same namespace, and +- # are all built from PIC. +- case $host_os in +- aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +- aix[[4-9]]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd=echo ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no + fi +- ;; +- esac +- AC_MSG_RESULT([$enable_shared]) ++ ;; + +- AC_MSG_CHECKING([whether to build static libraries]) +- # Make sure either enable_shared or enable_static is yes. +- test "$enable_shared" = yes || enable_static=yes +- AC_MSG_RESULT([$enable_static]) ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler + +- _LT_TAGVAR(GCC, $1)="$G77" +- _LT_TAGVAR(LD, $1)="$LD" ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + +- ## CAVEAT EMPTOR: +- ## There is no encapsulation within the following macros, do not change +- ## the running order or otherwise move them around unless you know exactly +- ## what you are doing... +- _LT_COMPILER_PIC($1) +- _LT_COMPILER_C_O($1) +- _LT_COMPILER_FILE_LOCKS($1) +- _LT_LINKER_SHLIBS($1) +- _LT_SYS_DYNAMIC_LINKER($1) +- _LT_LINKER_HARDCODE_LIBPATH($1) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ case $host in ++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; ++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; ++ esac ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ cxx*) ++ case $host in ++ osf3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $RM $lib.exp' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ ;; ++ esac + +- _LT_CONFIG($1) +- fi # test -n "$compiler" ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +- GCC=$lt_save_GCC +- CC="$lt_save_CC" +-fi # test "$_lt_disable_F77" != yes ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ case $host in ++ osf3*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ esac + +-AC_LANG_POP +-])# _LT_LANG_F77_CONFIG ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + +-# _LT_PROG_FC +-# ----------- +-# Since AC_PROG_FC is broken, in that it returns the empty string +-# if there is no fortran compiler, we have our own version here. +-m4_defun([_LT_PROG_FC], +-[ +-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) +-AC_PROG_FC +-if test -z "$FC" || test "X$FC" = "Xno"; then +- _lt_disable_FC=yes +-fi +-popdef([AC_MSG_ERROR]) +-])# _LT_PROG_FC ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([_LT_PROG_FC], []) ++ psos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; + +-# _LT_LANG_FC_CONFIG([TAG]) +-# ------------------------- +-# Ensure that the configuration variables for a Fortran compiler are +-# suitably defined. These variables are subsequently used by _LT_CONFIG +-# to write the compiler configuration to `libtool'. +-m4_defun([_LT_LANG_FC_CONFIG], +-[AC_REQUIRE([_LT_PROG_FC])dnl +-AC_LANG_PUSH(Fortran) ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + +-_LT_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_TAGVAR(allow_undefined_flag, $1)= +-_LT_TAGVAR(always_export_symbols, $1)=no +-_LT_TAGVAR(archive_expsym_cmds, $1)= +-_LT_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_TAGVAR(hardcode_direct, $1)=no +-_LT_TAGVAR(hardcode_direct_absolute, $1)=no +-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_TAGVAR(hardcode_minus_L, $1)=no +-_LT_TAGVAR(hardcode_automatic, $1)=no +-_LT_TAGVAR(inherit_rpath, $1)=no +-_LT_TAGVAR(module_cmds, $1)= +-_LT_TAGVAR(module_expsym_cmds, $1)= +-_LT_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_TAGVAR(no_undefined_flag, $1)= +-_LT_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes + +-# Source file extension for fc test sources. +-ac_ext=${ac_fc_srcext-f} ++ output_verbose_link_cmd='echo' + +-# Object file extension for compiled fc test sources. +-objext=o +-_LT_TAGVAR(objext, $1)=$objext ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + +-# No sense in running all these tests if we already determined that +-# the FC compiler isn't working. Some variables (like enable_shared) +-# are currently assumed to apply to all compilers on this platform, +-# and will be corrupted by setting them based on a non-working compiler. +-if test "$_lt_disable_FC" != yes; then +- # Code to be used in simple compile tests +- lt_simple_compile_test_code="\ +- subroutine t +- return +- end +-" ++ # The C++ compiler must be used to create the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' ++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + +- # Code to be used in simple link tests +- lt_simple_link_test_code="\ +- program t +- end +-" ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + +- # ltmain only uses $CC for tagged configurations so make sure $CC is set. +- _LT_TAG_COMPILER ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ fi + +- # save warnings/boilerplate of simple test code +- _LT_COMPILER_BOILERPLATE +- _LT_LINKER_BOILERPLATE ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ ;; + +- # Allow CC to be a program name with arguments. +- lt_save_CC="$CC" +- lt_save_GCC=$GCC +- CC=${FC-"f95"} +- compiler=$CC +- GCC=$ac_cv_fc_compiler_gnu ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' + +- _LT_TAGVAR(compiler, $1)=$CC +- _LT_CC_BASENAME([$compiler]) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; + +- if test -n "$compiler"; then +- AC_MSG_CHECKING([if libtool supports shared libraries]) +- AC_MSG_RESULT([$can_build_shared]) ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; + +- AC_MSG_CHECKING([whether to build shared libraries]) +- test "$can_build_shared" = "no" && enable_shared=no ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; + +- # On AIX, shared libraries and static libraries use the same namespace, and +- # are all built from PIC. +- case $host_os in +- aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- aix[[4-9]]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi ++ ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac +- AC_MSG_RESULT([$enable_shared]) + +- AC_MSG_CHECKING([whether to build static libraries]) +- # Make sure either enable_shared or enable_static is yes. +- test "$enable_shared" = yes || enable_static=yes +- AC_MSG_RESULT([$enable_static]) ++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" ++ _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: +@@ -6869,2964 +7016,2738 @@ + _LT_CONFIG($1) + fi # test -n "$compiler" + ++ CC=$lt_save_CC ++ LDCXX=$LD ++ LD=$lt_save_LD + GCC=$lt_save_GCC +- CC="$lt_save_CC" +-fi # test "$_lt_disable_FC" != yes ++ with_gnu_ld=$lt_save_with_gnu_ld ++ lt_cv_path_LDCXX=$lt_cv_path_LD ++ lt_cv_path_LD=$lt_save_path_LD ++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++fi # test "$_lt_caught_CXX_error" != yes + + AC_LANG_POP +-])# _LT_LANG_FC_CONFIG +- +- +-# _LT_LANG_GCJ_CONFIG([TAG]) +-# -------------------------- +-# Ensure that the configuration variables for the GNU Java Compiler compiler +-# are suitably defined. These variables are subsequently used by _LT_CONFIG +-# to write the compiler configuration to `libtool'. +-m4_defun([_LT_LANG_GCJ_CONFIG], +-[AC_REQUIRE([LT_PROG_GCJ])dnl +-AC_LANG_SAVE +- +-# Source file extension for Java test sources. +-ac_ext=java +- +-# Object file extension for compiled Java test sources. +-objext=o +-_LT_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_TAG_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-lt_save_GCC=$GCC +-GCC=yes +-CC=${GCJ-"gcj"} +-compiler=$CC +-_LT_TAGVAR(compiler, $1)=$CC +-_LT_TAGVAR(LD, $1)="$LD" +-_LT_CC_BASENAME([$compiler]) +- +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-_LT_TAGVAR(archive_cmds_need_lc, $1)=no +- +-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +- +-if test -n "$compiler"; then +- _LT_COMPILER_NO_RTTI($1) +- _LT_COMPILER_PIC($1) +- _LT_COMPILER_C_O($1) +- _LT_COMPILER_FILE_LOCKS($1) +- _LT_LINKER_SHLIBS($1) +- _LT_LINKER_HARDCODE_LIBPATH($1) +- +- _LT_CONFIG($1) +-fi ++])# _LT_LANG_CXX_CONFIG + +-AC_LANG_RESTORE + +-GCC=$lt_save_GCC +-CC="$lt_save_CC" +-])# _LT_LANG_GCJ_CONFIG ++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) ++# --------------------------------- ++# Figure out "hidden" library dependencies from verbose ++# compiler output when linking a shared library. ++# Parse the compiler output and extract the necessary ++# objects, libraries and library flags. ++m4_defun([_LT_SYS_HIDDEN_LIBDEPS], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++# Dependencies to place before and after the object being linked: ++_LT_TAGVAR(predep_objects, $1)= ++_LT_TAGVAR(postdep_objects, $1)= ++_LT_TAGVAR(predeps, $1)= ++_LT_TAGVAR(postdeps, $1)= ++_LT_TAGVAR(compiler_lib_search_path, $1)= + ++dnl we can't use the lt_simple_compile_test_code here, ++dnl because it contains code intended for an executable, ++dnl not a library. It's possible we should let each ++dnl tag define a new lt_????_link_test_code variable, ++dnl but it's only used here... ++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF ++int a; ++void foo (void) { a = 0; } ++_LT_EOF ++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF ++class Foo ++{ ++public: ++ Foo (void) { a = 0; } ++private: ++ int a; ++}; ++_LT_EOF ++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer*4 a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF ++public class foo { ++ private int a; ++ public void bar (void) { ++ a = 0; ++ } ++}; ++_LT_EOF ++]) ++dnl Parse the compiler output and extract the necessary ++dnl objects, libraries and library flags. ++if AC_TRY_EVAL(ac_compile); then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. + +-# _LT_LANG_RC_CONFIG([TAG]) +-# ------------------------- +-# Ensure that the configuration variables for the Windows resource compiler +-# are suitably defined. These variables are subsequently used by _LT_CONFIG +-# to write the compiler configuration to `libtool'. +-m4_defun([_LT_LANG_RC_CONFIG], +-[AC_REQUIRE([LT_PROG_RC])dnl +-AC_LANG_SAVE ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no + +-# Source file extension for RC test sources. +-ac_ext=rc ++ for p in `eval "$output_verbose_link_cmd"`; do ++ case $p in + +-# Object file extension for compiled RC test sources. +-objext=o +-_LT_TAGVAR(objext, $1)=$objext ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" || ++ test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then ++ _LT_TAGVAR(postdeps, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" ++ fi ++ fi ++ ;; + +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_TAG_COMPILER ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then ++ _LT_TAGVAR(predep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" ++ fi ++ else ++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then ++ _LT_TAGVAR(postdep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" ++ fi ++ fi ++ ;; + +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE ++ *) ;; # Ignore the rest. + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-lt_save_GCC=$GCC +-GCC= +-CC=${RC-"windres"} +-compiler=$CC +-_LT_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) +-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ esac ++ done + +-if test -n "$compiler"; then +- : +- _LT_CONFIG($1) ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling $1 test program" + fi + +-GCC=$lt_save_GCC +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# _LT_LANG_RC_CONFIG +- +- +-# LT_PROG_GCJ +-# ----------- +-AC_DEFUN([LT_PROG_GCJ], +-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], +- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], +- [AC_CHECK_TOOL(GCJ, gcj,) +- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" +- AC_SUBST(GCJFLAGS)])])[]dnl +-]) ++$RM -f confest.$objext + +-# Old name: +-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([LT_AC_PROG_GCJ], []) ++# PORTME: override above test on systems where it is broken ++m4_if([$1], [CXX], ++[case $host_os in ++interix[[3-9]]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_TAGVAR(predep_objects,$1)= ++ _LT_TAGVAR(postdep_objects,$1)= ++ _LT_TAGVAR(postdeps,$1)= ++ ;; + ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 + +-# LT_PROG_RC +-# ---------- +-AC_DEFUN([LT_PROG_RC], +-[AC_CHECK_TOOL(RC, windres,) +-]) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac + +-# Old name: +-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([LT_AC_PROG_RC], []) ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; + ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac + +-# _LT_DECL_EGREP +-# -------------- +-# If we don't have a new enough Autoconf to choose the best grep +-# available, choose the one first in the user's PATH. +-m4_defun([_LT_DECL_EGREP], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_REQUIRE([AC_PROG_FGREP])dnl +-test -z "$GREP" && GREP=grep +-_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +-_LT_DECL([], [EGREP], [1], [An ERE matcher]) +-_LT_DECL([], [FGREP], [1], [A literal string matcher]) +-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +-AC_SUBST([GREP]) ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac + ]) + +- +-# _LT_DECL_OBJDUMP +-# -------------- +-# If we don't have a new enough Autoconf to choose the best objdump +-# available, choose the one first in the user's PATH. +-m4_defun([_LT_DECL_OBJDUMP], +-[AC_CHECK_TOOL(OBJDUMP, objdump, false) +-test -z "$OBJDUMP" && OBJDUMP=objdump +-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +-AC_SUBST([OBJDUMP]) +-]) ++case " $_LT_TAGVAR(postdeps, $1) " in ++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; ++esac ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)= ++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` ++fi ++_LT_TAGDECL([], [compiler_lib_search_dirs], [1], ++ [The directories searched by this compiler when creating a shared library]) ++_LT_TAGDECL([], [predep_objects], [1], ++ [Dependencies to place before and after the objects being linked to ++ create a shared library]) ++_LT_TAGDECL([], [postdep_objects], [1]) ++_LT_TAGDECL([], [predeps], [1]) ++_LT_TAGDECL([], [postdeps], [1]) ++_LT_TAGDECL([], [compiler_lib_search_path], [1], ++ [The library search path used internally by the compiler when linking ++ a shared library]) ++])# _LT_SYS_HIDDEN_LIBDEPS + + +-# _LT_DECL_SED ++# _LT_PROG_F77 + # ------------ +-# Check for a fully-functional sed program, that truncates +-# as few characters as possible. Prefer GNU sed if found. +-m4_defun([_LT_DECL_SED], +-[AC_PROG_SED +-test -z "$SED" && SED=sed +-Xsed="$SED -e 1s/^X//" +-_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], +- [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +-])# _LT_DECL_SED ++# Since AC_PROG_F77 is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_F77], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) ++AC_PROG_F77 ++if test -z "$F77" || test "X$F77" = "Xno"; then ++ _lt_disable_F77=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_F77 + +-m4_ifndef([AC_PROG_SED], [ +-# NOTE: This macro has been submitted for inclusion into # +-# GNU Autoconf as AC_PROG_SED. When it is available in # +-# a released version of Autoconf we should remove this # +-# macro and use it instead. # ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_F77], []) + +-m4_defun([AC_PROG_SED], +-[AC_MSG_CHECKING([for a sed that does not truncate output]) +-AC_CACHE_VAL(lt_cv_path_SED, +-[# Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done +- done +-done +-IFS=$as_save_IFS +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && continue +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed +- fi +- done +-done +-]) +-SED=$lt_cv_path_SED +-AC_SUBST([SED]) +-AC_MSG_RESULT([$SED]) +-])#AC_PROG_SED +-])#m4_ifndef + +-# Old name: +-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([LT_AC_PROG_SED], []) ++# _LT_LANG_F77_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a Fortran 77 compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_F77_CONFIG], ++[AC_REQUIRE([_LT_PROG_F77])dnl ++AC_LANG_PUSH(Fortran 77) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for f77 test sources. ++ac_ext=f + ++# Object file extension for compiled f77 test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +-# _LT_CHECK_SHELL_FEATURES +-# ------------------------ +-# Find out whether the shell is Bourne or XSI compatible, +-# or has some other useful features. +-m4_defun([_LT_CHECK_SHELL_FEATURES], +-[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +-# Try some XSI features +-xsi_shell=no +-( _lt_dummy="a/b/c" +- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ +- = c,a/b,, \ +- && eval 'test $(( 1 + 1 )) -eq 2 \ +- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ +- && xsi_shell=yes +-AC_MSG_RESULT([$xsi_shell]) +-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) ++# No sense in running all these tests if we already determined that ++# the F77 compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_F77" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" + +-AC_MSG_CHECKING([whether the shell understands "+="]) +-lt_shell_append=no +-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ +- >/dev/null 2>&1 \ +- && lt_shell_append=yes +-AC_MSG_RESULT([$lt_shell_append]) +-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" + +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- lt_unset=unset +-else +- lt_unset=false +-fi +-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER + +-# test EBCDIC or ASCII +-case `echo X|tr X '\101'` in +- A) # ASCII based system +- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr +- lt_SP2NL='tr \040 \012' +- lt_NL2SP='tr \015\012 \040\040' +- ;; +- *) # EBCDIC based system +- lt_SP2NL='tr \100 \n' +- lt_NL2SP='tr \r\n \100\100' +- ;; +-esac +-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +-])# _LT_CHECK_SHELL_FEATURES ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE + ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${F77-"f77"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ GCC=$G77 ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) + +-# _LT_PROG_XSI_SHELLFNS +-# --------------------- +-# Bourne and XSI compatible variants of some useful shell functions. +-m4_defun([_LT_PROG_XSI_SHELLFNS], +-[case $xsi_shell in +- yes) +- cat << \_LT_EOF >> "$cfgfile" ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no + +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +-} ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) + +-# func_basename file +-func_basename () +-{ +- func_basename_result="${1##*/}" +-} ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) + +-# func_dirname_and_basename file append nondir_replacement +-# perform func_basename and func_dirname in a single function +-# call: +-# dirname: Compute the dirname of FILE. If nonempty, +-# add APPEND to the result, otherwise set result +-# to NONDIR_REPLACEMENT. +-# value returned in "$func_dirname_result" +-# basename: Compute filename of FILE. +-# value retuned in "$func_basename_result" +-# Implementation must be kept synchronized with func_dirname +-# and func_basename. For efficiency, we do not delegate to +-# those functions but instead duplicate the functionality here. +-func_dirname_and_basename () +-{ +- case ${1} in +- */*) func_dirname_result="${1%/*}${2}" ;; +- * ) func_dirname_result="${3}" ;; +- esac +- func_basename_result="${1##*/}" +-} ++ _LT_TAGVAR(GCC, $1)="$G77" ++ _LT_TAGVAR(LD, $1)="$LD" + +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-func_stripname () +-{ +- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are +- # positional parameters, so assign one to ordinary parameter first. +- func_stripname_result=${3} +- func_stripname_result=${func_stripname_result#"${1}"} +- func_stripname_result=${func_stripname_result%"${2}"} +-} ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) + +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=${1%%=*} +- func_opt_split_arg=${1#*=} +-} ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" + +-# func_lo2o object +-func_lo2o () +-{ +- case ${1} in +- *.lo) func_lo2o_result=${1%.lo}.${objext} ;; +- *) func_lo2o_result=${1} ;; +- esac +-} ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_F77" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_F77_CONFIG ++ ++ ++# _LT_PROG_FC ++# ----------- ++# Since AC_PROG_FC is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_FC], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) ++AC_PROG_FC ++if test -z "$FC" || test "X$FC" = "Xno"; then ++ _lt_disable_FC=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_FC ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_FC], []) ++ ++ ++# _LT_LANG_FC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for a Fortran compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_FC_CONFIG], ++[AC_REQUIRE([_LT_PROG_FC])dnl ++AC_LANG_PUSH(Fortran) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for fc test sources. ++ac_ext=${ac_fc_srcext-f} + +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=${1%.*}.lo +-} ++# Object file extension for compiled fc test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=$(( $[*] )) +-} ++# No sense in running all these tests if we already determined that ++# the FC compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_FC" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" + +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=${#1} +-} ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" + +-_LT_EOF +- ;; +- *) # Bourne compatible functions. +- cat << \_LT_EOF >> "$cfgfile" ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER + +-# func_dirname file append nondir_replacement +-# Compute the dirname of FILE. If nonempty, add APPEND to the result, +-# otherwise set result to NONDIR_REPLACEMENT. +-func_dirname () +-{ +- # Extract subdirectory from the argument. +- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` +- if test "X$func_dirname_result" = "X${1}"; then +- func_dirname_result="${3}" +- else +- func_dirname_result="$func_dirname_result${2}" +- fi +-} ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE + +-# func_basename file +-func_basename () +-{ +- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +-} ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${FC-"f95"} ++ compiler=$CC ++ GCC=$ac_cv_fc_compiler_gnu + +-dnl func_dirname_and_basename +-dnl A portable version of this function is already defined in general.m4sh +-dnl so there is no need for it here. ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) + +-# func_stripname prefix suffix name +-# strip PREFIX and SUFFIX off of NAME. +-# PREFIX and SUFFIX must not contain globbing or regex special +-# characters, hashes, percent signs, but SUFFIX may contain a leading +-# dot (in which case that matches only a dot). +-# func_strip_suffix prefix name +-func_stripname () +-{ +- case ${2} in +- .*) func_stripname_result=`$ECHO "X${3}" \ +- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; +- *) func_stripname_result=`$ECHO "X${3}" \ +- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; +- esac +-} ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) + +-# sed scripts: +-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' +-my_sed_long_arg='1s/^-[[^=]]*=//' ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no + +-# func_opt_split +-func_opt_split () +-{ +- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` +- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +-} ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) + +-# func_lo2o object +-func_lo2o () +-{ +- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +-} ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) + +-# func_xform libobj-or-source +-func_xform () +-{ +- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` +-} ++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" ++ _LT_TAGVAR(LD, $1)="$LD" + +-# func_arith arithmetic-term... +-func_arith () +-{ +- func_arith_result=`expr "$[@]"` +-} ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) + +-# func_len string +-# STRING may not start with a hyphen. +-func_len () +-{ +- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +-} ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" + +-_LT_EOF +-esac ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_FC" != yes + +-case $lt_shell_append in +- yes) +- cat << \_LT_EOF >> "$cfgfile" ++AC_LANG_POP ++])# _LT_LANG_FC_CONFIG + +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$[1]+=\$[2]" +-} +-_LT_EOF +- ;; +- *) +- cat << \_LT_EOF >> "$cfgfile" + +-# func_append var value +-# Append VALUE to the end of shell variable VAR. +-func_append () +-{ +- eval "$[1]=\$$[1]\$[2]" +-} ++# _LT_LANG_GCJ_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for the GNU Java Compiler compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_GCJ_CONFIG], ++[AC_REQUIRE([LT_PROG_GCJ])dnl ++AC_LANG_SAVE + +-_LT_EOF +- ;; +- esac +-]) ++# Source file extension for Java test sources. ++ac_ext=java + +-# Helper functions for option handling. -*- Autoconf -*- +-# +-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +-# Written by Gary V. Vaughan, 2004 +-# +-# This file is free software; the Free Software Foundation gives +-# unlimited permission to copy and/or distribute it, with or without +-# modifications, as long as this notice is preserved. ++# Object file extension for compiled Java test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +-# serial 6 ltoptions.m4 ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}" + +-# This is to help aclocal find these macros, as it can't see m4_define. +-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER + +-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +-# ------------------------------------------ +-m4_define([_LT_MANGLE_OPTION], +-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC=yes ++CC=${GCJ-"gcj"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_TAGVAR(LD, $1)="$LD" ++_LT_CC_BASENAME([$compiler]) + +-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +-# --------------------------------------- +-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +-# matching handler defined, dispatch to it. Other OPTION-NAMEs are +-# saved as a flag. +-m4_define([_LT_SET_OPTION], +-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), +- _LT_MANGLE_DEFUN([$1], [$2]), +- [m4_warning([Unknown $1 option `$2'])])[]dnl +-]) ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) + ++ _LT_CONFIG($1) ++fi + +-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +-# ------------------------------------------------------------ +-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +-m4_define([_LT_IF_OPTION], +-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) ++AC_LANG_RESTORE + ++GCC=$lt_save_GCC ++CC="$lt_save_CC" ++])# _LT_LANG_GCJ_CONFIG + +-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +-# ------------------------------------------------------- +-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +-# are set. +-m4_define([_LT_UNLESS_OPTIONS], +-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), +- [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), +- [m4_define([$0_found])])])[]dnl +-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +-])[]dnl +-]) + ++# _LT_LANG_RC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for the Windows resource compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_RC_CONFIG], ++[AC_REQUIRE([LT_PROG_RC])dnl ++AC_LANG_SAVE + +-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +-# ---------------------------------------- +-# OPTION-LIST is a space-separated list of Libtool options associated +-# with MACRO-NAME. If any OPTION has a matching handler declared with +-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +-# the unknown option and exit. +-m4_defun([_LT_SET_OPTIONS], +-[# Set options +-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), +- [_LT_SET_OPTION([$1], _LT_Option)]) ++# Source file extension for RC test sources. ++ac_ext=rc + +-m4_if([$1],[LT_INIT],[ +- dnl +- dnl Simply set some default values (i.e off) if boolean options were not +- dnl specified: +- _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no +- ]) +- _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no +- ]) +- dnl +- dnl If no reference was made to various pairs of opposing options, then +- dnl we run the default mode handler for the pair. For example, if neither +- dnl `shared' nor `disable-shared' was passed, we enable building of shared +- dnl archives by default: +- _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) +- _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) +- _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) +- _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], +- [_LT_ENABLE_FAST_INSTALL]) +- ]) +-])# _LT_SET_OPTIONS ++# Object file extension for compiled RC test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" + +-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +-# ----------------------------------------- +-m4_define([_LT_MANGLE_DEFUN], +-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC= ++CC=${RC-"windres"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) ++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +-# ----------------------------------------------- +-m4_define([LT_OPTION_DEFINE], +-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +-])# LT_OPTION_DEFINE ++if test -n "$compiler"; then ++ : ++ _LT_CONFIG($1) ++fi + ++GCC=$lt_save_GCC ++AC_LANG_RESTORE ++CC="$lt_save_CC" ++])# _LT_LANG_RC_CONFIG + +-# dlopen +-# ------ +-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +-]) + +-AU_DEFUN([AC_LIBTOOL_DLOPEN], +-[_LT_SET_OPTION([LT_INIT], [dlopen]) +-AC_DIAGNOSE([obsolete], +-[$0: Remove this warning and the call to _LT_SET_OPTION when you +-put the `dlopen' option into LT_INIT's first parameter.]) ++# LT_PROG_GCJ ++# ----------- ++AC_DEFUN([LT_PROG_GCJ], ++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl + ]) + ++# Old name: ++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) + dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) ++dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +-# win32-dll +-# --------- +-# Declare package support for building win32 dll's. +-LT_OPTION_DEFINE([LT_INIT], [win32-dll], +-[enable_win32_dll=yes ++# LT_PROG_RC ++# ---------- ++AC_DEFUN([LT_PROG_RC], ++[AC_CHECK_TOOL(RC, windres,) ++]) + +-case $host in +-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) +- AC_CHECK_TOOL(AS, as, false) +- AC_CHECK_TOOL(DLLTOOL, dlltool, false) +- AC_CHECK_TOOL(OBJDUMP, objdump, false) +- ;; +-esac ++# Old name: ++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_RC], []) + +-test -z "$AS" && AS=as +-_LT_DECL([], [AS], [0], [Assembler program])dnl + +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl ++# _LT_DECL_EGREP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best grep ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_EGREP], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_REQUIRE([AC_PROG_FGREP])dnl ++test -z "$GREP" && GREP=grep ++_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) ++_LT_DECL([], [EGREP], [1], [An ERE matcher]) ++_LT_DECL([], [FGREP], [1], [A literal string matcher]) ++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too ++AC_SUBST([GREP]) ++]) + +-test -z "$OBJDUMP" && OBJDUMP=objdump +-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl +-])# win32-dll + +-AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +-[AC_REQUIRE([AC_CANONICAL_HOST])dnl +-_LT_SET_OPTION([LT_INIT], [win32-dll]) +-AC_DIAGNOSE([obsolete], +-[$0: Remove this warning and the call to _LT_SET_OPTION when you +-put the `win32-dll' option into LT_INIT's first parameter.]) ++# _LT_DECL_OBJDUMP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best objdump ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_OBJDUMP], ++[AC_CHECK_TOOL(OBJDUMP, objdump, false) ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) ++AC_SUBST([OBJDUMP]) + ]) + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + ++# _LT_DECL_SED ++# ------------ ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++m4_defun([_LT_DECL_SED], ++[AC_PROG_SED ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) ++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], ++ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ++])# _LT_DECL_SED + +-# _LT_ENABLE_SHARED([DEFAULT]) +-# ---------------------------- +-# implement the --enable-shared flag, and supports the `shared' and +-# `disable-shared' LT_INIT options. +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-m4_define([_LT_ENABLE_SHARED], +-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +-AC_ARG_ENABLE([shared], +- [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], +- [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) ++m4_ifndef([AC_PROG_SED], [ ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # + +- _LT_DECL([build_libtool_libs], [enable_shared], [0], +- [Whether or not to build shared libraries]) +-])# _LT_ENABLE_SHARED ++m4_defun([AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++IFS=$as_save_IFS ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) ++AC_MSG_RESULT([$SED]) ++])#AC_PROG_SED ++])#m4_ifndef + +-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) ++# Old name: ++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_SED], []) + +-# Old names: +-AC_DEFUN([AC_ENABLE_SHARED], +-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +-]) + +-AC_DEFUN([AC_DISABLE_SHARED], +-[_LT_SET_OPTION([LT_INIT], [disable-shared]) +-]) ++# _LT_CHECK_SHELL_FEATURES ++# ------------------------ ++# Find out whether the shell is Bourne or XSI compatible, ++# or has some other useful features. ++m4_defun([_LT_CHECK_SHELL_FEATURES], ++[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++AC_MSG_RESULT([$xsi_shell]) ++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++AC_MSG_CHECKING([whether the shell understands "+="]) ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++AC_MSG_RESULT([$lt_shell_append]) ++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AM_ENABLE_SHARED], []) +-dnl AC_DEFUN([AM_DISABLE_SHARED], []) ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl ++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ++])# _LT_CHECK_SHELL_FEATURES + + +-# _LT_ENABLE_STATIC([DEFAULT]) +-# ---------------------------- +-# implement the --enable-static flag, and support the `static' and +-# `disable-static' LT_INIT options. +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-m4_define([_LT_ENABLE_STATIC], +-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +-AC_ARG_ENABLE([static], +- [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], +- [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_static=]_LT_ENABLE_STATIC_DEFAULT) ++# _LT_PROG_XSI_SHELLFNS ++# --------------------- ++# Bourne and XSI compatible variants of some useful shell functions. ++m4_defun([_LT_PROG_XSI_SHELLFNS], ++[case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" + +- _LT_DECL([build_old_libs], [enable_static], [0], +- [Whether or not to build static libraries]) +-])# _LT_ENABLE_STATIC ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} + +-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} + +-# Old names: +-AC_DEFUN([AC_ENABLE_STATIC], +-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +-]) ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} + +-AC_DEFUN([AC_DISABLE_STATIC], +-[_LT_SET_OPTION([LT_INIT], [disable-static]) +-]) ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} + +-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AM_ENABLE_STATIC], []) +-dnl AC_DEFUN([AM_DISABLE_STATIC], []) ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} + ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} + ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $[*] )) ++} + +-# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +-# ---------------------------------- +-# implement the --enable-fast-install flag, and support the `fast-install' +-# and `disable-fast-install' LT_INIT options. +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-m4_define([_LT_ENABLE_FAST_INSTALL], +-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +-AC_ARG_ENABLE([fast-install], +- [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], +- [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} + +-_LT_DECL([fast_install], [enable_fast_install], [0], +- [Whether or not to optimize for fast installation])dnl +-])# _LT_ENABLE_FAST_INSTALL ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" + +-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} + +-# Old names: +-AU_DEFUN([AC_ENABLE_FAST_INSTALL], +-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +-AC_DIAGNOSE([obsolete], +-[$0: Remove this warning and the call to _LT_SET_OPTION when you put +-the `fast-install' option into LT_INIT's first parameter.]) +-]) ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} + +-AU_DEFUN([AC_DISABLE_FAST_INSTALL], +-[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +-AC_DIAGNOSE([obsolete], +-[$0: Remove this warning and the call to _LT_SET_OPTION when you put +-the `disable-fast-install' option into LT_INIT's first parameter.]) +-]) ++dnl func_dirname_and_basename ++dnl A portable version of this function is already defined in general.m4sh ++dnl so there is no need for it here. + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} + ++# sed scripts: ++my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[[^=]]*=//' + +-# _LT_WITH_PIC([MODE]) +-# -------------------- +-# implement the --with-pic flag, and support the `pic-only' and `no-pic' +-# LT_INIT options. +-# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +-m4_define([_LT_WITH_PIC], +-[AC_ARG_WITH([pic], +- [AS_HELP_STRING([--with-pic], +- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], +- [pic_mode="$withval"], +- [pic_mode=default]) ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} + +-test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} + +-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +-])# _LT_WITH_PIC ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` ++} + +-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$[@]"` ++} + +-# Old name: +-AU_DEFUN([AC_LIBTOOL_PICMODE], +-[_LT_SET_OPTION([LT_INIT], [pic-only]) +-AC_DIAGNOSE([obsolete], +-[$0: Remove this warning and the call to _LT_SET_OPTION when you +-put the `pic-only' option into LT_INIT's first parameter.]) +-]) ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` ++} + +-dnl aclocal-1.4 backwards compatibility: +-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ++_LT_EOF ++esac + ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" + +-m4_define([_LTDL_MODE], []) +-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], +- [m4_define([_LTDL_MODE], [nonrecursive])]) +-LT_OPTION_DEFINE([LTDL_INIT], [recursive], +- [m4_define([_LTDL_MODE], [recursive])]) +-LT_OPTION_DEFINE([LTDL_INIT], [subproject], +- [m4_define([_LTDL_MODE], [subproject])]) ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]+=\$[2]" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" + +-m4_define([_LTDL_TYPE], []) +-LT_OPTION_DEFINE([LTDL_INIT], [installable], +- [m4_define([_LTDL_TYPE], [installable])]) +-LT_OPTION_DEFINE([LTDL_INIT], [convenience], +- [m4_define([_LTDL_TYPE], [convenience])]) ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]=\$$[1]\$[2]" ++} + +-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- ++_LT_EOF ++ ;; ++ esac ++]) ++ ++# Helper functions for option handling. -*- Autoconf -*- + # +-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +-# Written by Gary V. Vaughan, 2004 ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 + # + # This file is free software; the Free Software Foundation gives + # unlimited permission to copy and/or distribute it, with or without + # modifications, as long as this notice is preserved. + +-# serial 6 ltsugar.m4 ++# serial 6 ltoptions.m4 + + # This is to help aclocal find these macros, as it can't see m4_define. +-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) +- +- +-# lt_join(SEP, ARG1, [ARG2...]) +-# ----------------------------- +-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +-# associated separator. +-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +-# versions in m4sugar had bugs. +-m4_define([lt_join], +-[m4_if([$#], [1], [], +- [$#], [2], [[$2]], +- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +-m4_define([_lt_join], +-[m4_if([$#$2], [2], [], +- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) ++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +-# lt_car(LIST) +-# lt_cdr(LIST) +-# ------------ +-# Manipulate m4 lists. +-# These macros are necessary as long as will still need to support +-# Autoconf-2.59 which quotes differently. +-m4_define([lt_car], [[$1]]) +-m4_define([lt_cdr], +-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], +- [$#], 1, [], +- [m4_dquote(m4_shift($@))])]) +-m4_define([lt_unquote], $1) ++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) ++# ------------------------------------------ ++m4_define([_LT_MANGLE_OPTION], ++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +-# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +-# ------------------------------------------ +-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +-# Note that neither SEPARATOR nor STRING are expanded; they are appended +-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +-# No SEPARATOR is output if MACRO-NAME was previously undefined (different +-# than defined and empty). +-# +-# This macro is needed until we can rely on Autoconf 2.62, since earlier +-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +-m4_define([lt_append], +-[m4_define([$1], +- m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) ++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) ++# --------------------------------------- ++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a ++# matching handler defined, dispatch to it. Other OPTION-NAMEs are ++# saved as a flag. ++m4_define([_LT_SET_OPTION], ++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl ++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), ++ _LT_MANGLE_DEFUN([$1], [$2]), ++ [m4_warning([Unknown $1 option `$2'])])[]dnl ++]) + + ++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------------------------ ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++m4_define([_LT_IF_OPTION], ++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + +-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +-# ---------------------------------------------------------- +-# Produce a SEP delimited list of all paired combinations of elements of +-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +-# has the form PREFIXmINFIXSUFFIXn. +-# Needed until we can rely on m4_combine added in Autoconf 2.62. +-m4_define([lt_combine], +-[m4_if(m4_eval([$# > 3]), [1], +- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +-[[m4_foreach([_Lt_prefix], [$2], +- [m4_foreach([_Lt_suffix], +- ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, +- [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + ++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) ++# ------------------------------------------------------- ++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME ++# are set. ++m4_define([_LT_UNLESS_OPTIONS], ++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), ++ [m4_define([$0_found])])])[]dnl ++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ++])[]dnl ++]) + +-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +-# ----------------------------------------------------------------------- +-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +-m4_define([lt_if_append_uniq], +-[m4_ifdef([$1], +- [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], +- [lt_append([$1], [$2], [$3])$4], +- [$5])], +- [lt_append([$1], [$2], [$3])$4])]) + ++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) ++# ---------------------------------------- ++# OPTION-LIST is a space-separated list of Libtool options associated ++# with MACRO-NAME. If any OPTION has a matching handler declared with ++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about ++# the unknown option and exit. ++m4_defun([_LT_SET_OPTIONS], ++[# Set options ++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [_LT_SET_OPTION([$1], _LT_Option)]) + +-# lt_dict_add(DICT, KEY, VALUE) +-# ----------------------------- +-m4_define([lt_dict_add], +-[m4_define([$1($2)], [$3])]) ++m4_if([$1],[LT_INIT],[ ++ dnl ++ dnl Simply set some default values (i.e off) if boolean options were not ++ dnl specified: ++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ++ ]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ++ ]) ++ dnl ++ dnl If no reference was made to various pairs of opposing options, then ++ dnl we run the default mode handler for the pair. For example, if neither ++ dnl `shared' nor `disable-shared' was passed, we enable building of shared ++ dnl archives by default: ++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], ++ [_LT_ENABLE_FAST_INSTALL]) ++ ]) ++])# _LT_SET_OPTIONS + + +-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +-# -------------------------------------------- +-m4_define([lt_dict_add_subkey], +-[m4_define([$1($2:$3)], [$4])]) + ++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) ++# ----------------------------------------- ++m4_define([_LT_MANGLE_DEFUN], ++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + +-# lt_dict_fetch(DICT, KEY, [SUBKEY]) +-# ---------------------------------- +-m4_define([lt_dict_fetch], +-[m4_ifval([$3], +- m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), +- m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + ++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) ++# ----------------------------------------------- ++m4_define([LT_OPTION_DEFINE], ++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ++])# LT_OPTION_DEFINE + +-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +-# ----------------------------------------------------------------- +-m4_define([lt_if_dict_fetch], +-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], +- [$5], +- [$6])]) + ++# dlopen ++# ------ ++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ++]) + +-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +-# -------------------------------------------------------------- +-m4_define([lt_dict_filter], +-[m4_if([$5], [], [], +- [lt_join(m4_quote(m4_default([$4], [[, ]])), +- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), +- [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ++AU_DEFUN([AC_LIBTOOL_DLOPEN], ++[_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) + ]) + +-# ltversion.m4 -- version numbers -*- Autoconf -*- +-# +-# Copyright (C) 2004 Free Software Foundation, Inc. +-# Written by Scott James Remnant, 2004 +-# +-# This file is free software; the Free Software Foundation gives +-# unlimited permission to copy and/or distribute it, with or without +-# modifications, as long as this notice is preserved. ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + +-# Generated from ltversion.in. + +-# serial 3017 ltversion.m4 +-# This file is part of GNU Libtool ++# win32-dll ++# --------- ++# Declare package support for building win32 dll's. ++LT_OPTION_DEFINE([LT_INIT], [win32-dll], ++[enable_win32_dll=yes + +-m4_define([LT_PACKAGE_VERSION], [2.2.6b]) +-m4_define([LT_PACKAGE_REVISION], [1.3017]) ++case $host in ++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) ++ ;; ++esac + +-AC_DEFUN([LTVERSION_VERSION], +-[macro_version='2.2.6b' +-macro_revision='1.3017' +-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +-_LT_DECL(, macro_revision, 0) +-]) ++test -z "$AS" && AS=as ++_LT_DECL([], [AS], [0], [Assembler program])dnl + +-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +-# +-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. +-# Written by Scott James Remnant, 2004. +-# +-# This file is free software; the Free Software Foundation gives +-# unlimited permission to copy and/or distribute it, with or without +-# modifications, as long as this notice is preserved. ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl + +-# serial 4 lt~obsolete.m4 ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ++])# win32-dll + +-# These exist entirely to fool aclocal when bootstrapping libtool. +-# +-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +-# which have later been changed to m4_define as they aren't part of the +-# exported API, or moved to Autoconf or Automake where they belong. +-# +-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +-# using a macro with the same name in our local m4/libtool.m4 it'll +-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +-# and doesn't know about Autoconf macros at all.) +-# +-# So we provide this file, which has a silly filename so it's always +-# included after everything else. This provides aclocal with the +-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +-# because those macros already exist, or will be overwritten later. +-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +-# +-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +-# Yes, that means every name once taken will need to remain here until +-# we give up compatibility with versions before 1.7, at which point +-# we need to keep only those names which we still refer to. ++AU_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) + +-# This is to help aclocal find these macros, as it can't see m4_define. +-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + +-m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +-m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +-m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +-m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +-m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +-m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +-m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +-m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +-m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +-m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +-m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +-m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +-m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +-m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +-m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +-m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +-m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +-m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +-m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +-m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +-m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +-m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +-m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +-m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +-m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +-m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +-m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) +-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +-m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +-m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +-m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +-m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +-m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +-m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) + +-# nls.m4 serial 3 (gettext-0.15) +-dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. +-dnl This file is free software; the Free Software Foundation +-dnl gives unlimited permission to copy and/or distribute it, +-dnl with or without modifications, as long as this notice is preserved. +-dnl +-dnl This file can can be used in projects which are not available under +-dnl the GNU General Public License or the GNU Library General Public +-dnl License but which still want to provide support for the GNU gettext +-dnl functionality. +-dnl Please note that the actual code of the GNU gettext library is covered +-dnl by the GNU Library General Public License, and the rest of the GNU +-dnl gettext package package is covered by the GNU General Public License. +-dnl They are *not* in the public domain. ++# _LT_ENABLE_SHARED([DEFAULT]) ++# ---------------------------- ++# implement the --enable-shared flag, and supports the `shared' and ++# `disable-shared' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_SHARED], ++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([shared], ++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + +-dnl Authors: +-dnl Ulrich Drepper , 1995-2000. +-dnl Bruno Haible , 2000-2003. ++ _LT_DECL([build_libtool_libs], [enable_shared], [0], ++ [Whether or not to build shared libraries]) ++])# _LT_ENABLE_SHARED + +-AC_PREREQ(2.50) ++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +-AC_DEFUN([AM_NLS], +-[ +- AC_MSG_CHECKING([whether NLS is requested]) +- dnl Default is enabled NLS +- AC_ARG_ENABLE(nls, +- [ --disable-nls do not use Native Language Support], +- USE_NLS=$enableval, USE_NLS=yes) +- AC_MSG_RESULT($USE_NLS) +- AC_SUBST(USE_NLS) ++# Old names: ++AC_DEFUN([AC_ENABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) + ]) + +-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +-# +-# Copyright © 2004 Scott James Remnant . +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +-# ---------------------------------- +-AC_DEFUN([PKG_PROG_PKG_CONFIG], +-[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +-m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then +- AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +-fi +-if test -n "$PKG_CONFIG"; then +- _pkg_min_version=m4_default([$1], [0.9.0]) +- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) +- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +- PKG_CONFIG="" +- fi +- +-fi[]dnl +-])# PKG_PROG_PKG_CONFIG +- +-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +-# +-# Check to see whether a particular set of modules exists. Similar +-# to PKG_CHECK_MODULES(), but does not set variables or print errors. +-# +-# +-# Similar to PKG_CHECK_MODULES, make sure that the first instance of +-# this or PKG_CHECK_MODULES is called, or make sure to call +-# PKG_CHECK_EXISTS manually +-# -------------------------------------------------------------- +-AC_DEFUN([PKG_CHECK_EXISTS], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +-if test -n "$PKG_CONFIG" && \ +- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then +- m4_ifval([$2], [$2], [:]) +-m4_ifvaln([$3], [else +- $3])dnl +-fi]) ++AC_DEFUN([AC_DISABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) + ++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +-# --------------------------------------------- +-m4_define([_PKG_CONFIG], +-[if test -n "$PKG_CONFIG"; then +- if test -n "$$1"; then +- pkg_cv_[]$1="$$1" +- else +- PKG_CHECK_EXISTS([$3], +- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], +- [pkg_failed=yes]) +- fi +-else +- pkg_failed=untried +-fi[]dnl +-])# _PKG_CONFIG ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_SHARED], []) ++dnl AC_DEFUN([AM_DISABLE_SHARED], []) + +-# _PKG_SHORT_ERRORS_SUPPORTED +-# ----------------------------- +-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi[]dnl +-])# _PKG_SHORT_ERRORS_SUPPORTED + + +-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +-# [ACTION-IF-NOT-FOUND]) +-# +-# +-# Note that if there is a possibility the first call to +-# PKG_CHECK_MODULES might not happen, you should be sure to include an +-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +-# +-# +-# -------------------------------------------------------------- +-AC_DEFUN([PKG_CHECK_MODULES], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl ++# _LT_ENABLE_STATIC([DEFAULT]) ++# ---------------------------- ++# implement the --enable-static flag, and support the `static' and ++# `disable-static' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_STATIC], ++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([static], ++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + +-pkg_failed=no +-AC_MSG_CHECKING([for $1]) ++ _LT_DECL([build_old_libs], [enable_static], [0], ++ [Whether or not to build static libraries]) ++])# _LT_ENABLE_STATIC + +-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +-_PKG_CONFIG([$1][_LIBS], [libs], [$2]) ++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +-and $1[]_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details.]) ++# Old names: ++AC_DEFUN([AC_ENABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) + +-if test $pkg_failed = yes; then +- _PKG_SHORT_ERRORS_SUPPORTED +- if test $_pkg_short_errors_supported = yes; then +- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` +- else +- $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ++AC_DEFUN([AC_DISABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) + +- ifelse([$4], , [AC_MSG_ERROR(dnl +-[Package requirements ($2) were not met: ++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +-$$1_PKG_ERRORS ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_STATIC], []) ++dnl AC_DEFUN([AM_DISABLE_STATIC], []) + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. + +-_PKG_TEXT +-])], +- [AC_MSG_RESULT([no]) +- $4]) +-elif test $pkg_failed = untried; then +- ifelse([$4], , [AC_MSG_FAILURE(dnl +-[The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. + +-_PKG_TEXT ++# _LT_ENABLE_FAST_INSTALL([DEFAULT]) ++# ---------------------------------- ++# implement the --enable-fast-install flag, and support the `fast-install' ++# and `disable-fast-install' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_FAST_INSTALL], ++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([fast-install], ++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac], ++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +-To get pkg-config, see .])], +- [$4]) +-else +- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS +- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS +- AC_MSG_RESULT([yes]) +- ifelse([$3], , :, [$3]) +-fi[]dnl +-])# PKG_CHECK_MODULES ++_LT_DECL([fast_install], [enable_fast_install], [0], ++ [Whether or not to optimize for fast installation])dnl ++])# _LT_ENABLE_FAST_INSTALL + +-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +-# AM_AUTOMAKE_VERSION(VERSION) +-# ---------------------------- +-# Automake X.Y traces this macro to ensure aclocal.m4 has been +-# generated from the m4 files accompanying Automake X.Y. +-# (This private macro should not be called outside this file.) +-AC_DEFUN([AM_AUTOMAKE_VERSION], +-[am__api_version='1.11' +-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +-dnl require some minimum version. Point them to the right macro. +-m4_if([$1], [1.11.1], [], +- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++# Old names: ++AU_DEFUN([AC_ENABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) + ]) + +-# _AM_AUTOCONF_VERSION(VERSION) +-# ----------------------------- +-# aclocal traces this macro to find the Autoconf version. +-# This is a private macro too. Using m4_define simplifies +-# the logic in aclocal, which can simply ignore this definition. +-m4_define([_AM_AUTOCONF_VERSION], []) +- +-# AM_SET_CURRENT_AUTOMAKE_VERSION +-# ------------------------------- +-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +-[AM_AUTOMAKE_VERSION([1.11.1])dnl +-m4_ifndef([AC_AUTOCONF_VERSION], +- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) +- +-# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++AU_DEFUN([AC_DISABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) ++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + +-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +-# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +-# +-# Of course, Automake must honor this variable whenever it calls a +-# tool from the auxiliary directory. The problem is that $srcdir (and +-# therefore $ac_aux_dir as well) can be either absolute or relative, +-# depending on how configure is run. This is pretty annoying, since +-# it makes $ac_aux_dir quite unusable in subdirectories: in the top +-# source directory, any form will work fine, but in subdirectories a +-# relative path needs to be adjusted first. +-# +-# $ac_aux_dir/missing +-# fails when called from a subdirectory if $ac_aux_dir is relative +-# $top_srcdir/$ac_aux_dir/missing +-# fails if $ac_aux_dir is absolute, +-# fails when called from a subdirectory in a VPATH build with +-# a relative $ac_aux_dir +-# +-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +-# are both prefixed by $srcdir. In an in-source build this is usually +-# harmless because $srcdir is `.', but things will broke when you +-# start a VPATH build or use an absolute $srcdir. +-# +-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +-# and then we would define $MISSING as +-# MISSING="\${SHELL} $am_aux_dir/missing" +-# This will work as long as MISSING is not called from configure, because +-# unfortunately $(top_srcdir) has no meaning in configure. +-# However there are other variables, like CC, which are often used in +-# configure, and could therefore not use this "fixed" $ac_aux_dir. +-# +-# Another solution, used here, is to always expand $ac_aux_dir to an +-# absolute PATH. The drawback is that using absolute paths prevent a +-# configured tree to be moved without reconfiguration. + +-AC_DEFUN([AM_AUX_DIR_EXPAND], +-[dnl Rely on autoconf to set up CDPATH properly. +-AC_PREREQ([2.50])dnl +-# expand $ac_aux_dir to an absolute path +-am_aux_dir=`cd $ac_aux_dir && pwd` +-]) ++# _LT_WITH_PIC([MODE]) ++# -------------------- ++# implement the --with-pic flag, and support the `pic-only' and `no-pic' ++# LT_INIT options. ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++m4_define([_LT_WITH_PIC], ++[AC_ARG_WITH([pic], ++ [AS_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) + +-# AM_CONDITIONAL -*- Autoconf -*- ++test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ++])# _LT_WITH_PIC + +-# serial 9 ++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +-# AM_CONDITIONAL(NAME, SHELL-CONDITION) +-# ------------------------------------- +-# Define a conditional. +-AC_DEFUN([AM_CONDITIONAL], +-[AC_PREREQ(2.52)dnl +- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], +- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE])dnl +-AC_SUBST([$1_FALSE])dnl +-_AM_SUBST_NOTMAKE([$1_TRUE])dnl +-_AM_SUBST_NOTMAKE([$1_FALSE])dnl +-m4_define([_AM_COND_VALUE_$1], [$2])dnl +-if $2; then +- $1_TRUE= +- $1_FALSE='#' +-else +- $1_TRUE='#' +- $1_FALSE= +-fi +-AC_CONFIG_COMMANDS_PRE( +-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then +- AC_MSG_ERROR([[conditional "$1" was never defined. +-Usually this means the macro was only invoked conditionally.]]) +-fi])]) ++# Old name: ++AU_DEFUN([AC_LIBTOOL_PICMODE], ++[_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +-# serial 10 + +-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +-# written in clear, in which case automake, when reading aclocal.m4, +-# will think it sees a *use*, and therefore will trigger all it's +-# C support machinery. Also note that it means that autoscan, seeing +-# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++m4_define([_LTDL_MODE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], ++ [m4_define([_LTDL_MODE], [nonrecursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [recursive], ++ [m4_define([_LTDL_MODE], [recursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [subproject], ++ [m4_define([_LTDL_MODE], [subproject])]) + ++m4_define([_LTDL_TYPE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [installable], ++ [m4_define([_LTDL_TYPE], [installable])]) ++LT_OPTION_DEFINE([LTDL_INIT], [convenience], ++ [m4_define([_LTDL_TYPE], [convenience])]) + +-# _AM_DEPENDENCIES(NAME) +-# ---------------------- +-# See how the compiler implements dependency checking. +-# NAME is "CC", "CXX", "GCJ", or "OBJC". +-# We try a few techniques and use that to set a single cache variable. ++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- + # +-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +-# dependency, and given that the user is not expected to run this macro, +-# just rely on AC_PROG_CC. +-AC_DEFUN([_AM_DEPENDENCIES], +-[AC_REQUIRE([AM_SET_DEPDIR])dnl +-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +-AC_REQUIRE([AM_MAKE_INCLUDE])dnl +-AC_REQUIRE([AM_DEP_TRACK])dnl +- +-ifelse([$1], CC, [depcc="$CC" am_compiler_list=], +- [$1], CXX, [depcc="$CXX" am_compiler_list=], +- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], +- [$1], UPC, [depcc="$UPC" am_compiler_list=], +- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], +- [depcc="$$1" am_compiler_list=]) ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. + +-AC_CACHE_CHECK([dependency style of $depcc], +- [am_cv_$1_dependencies_compiler_type], +-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +- # We make a subdir and do the tests there. Otherwise we can end up +- # making bogus files that we don't know about and never remove. For +- # instance it was reported that on HP-UX the gcc test will end up +- # making a dummy file named `D' -- because `-MD' means `put the output +- # in D'. +- mkdir conftest.dir +- # Copy depcomp to subdir because otherwise we won't find it if we're +- # using a relative directory. +- cp "$am_depcomp" conftest.dir +- cd conftest.dir +- # We will build objects and dependencies in a subdirectory because +- # it helps to detect inapplicable dependency modes. For instance +- # both Tru64's cc and ICC support -MD to output dependencies as a +- # side effect of compilation, but ICC will put the dependencies in +- # the current directory while Tru64 will put them in the object +- # directory. +- mkdir sub ++# serial 6 ltsugar.m4 + +- am_cv_$1_dependencies_compiler_type=none +- if test "$am_compiler_list" = ""; then +- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` +- fi +- am__universal=false +- m4_case([$1], [CC], +- [case " $depcc " in #( +- *\ -arch\ *\ -arch\ *) am__universal=true ;; +- esac], +- [CXX], +- [case " $depcc " in #( +- *\ -arch\ *\ -arch\ *) am__universal=true ;; +- esac]) ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + +- for depmode in $am_compiler_list; do +- # Setup a source with many dependencies, because some compilers +- # like to wrap large dependency lists on column 80 (with \), and +- # we should not choose a depcomp mode which is confused by this. +- # +- # We need to recreate these files for each test, as the compiler may +- # overwrite some of them when testing with obscure command lines. +- # This happens at least with the AIX C compiler. +- : > sub/conftest.c +- for i in 1 2 3 4 5 6; do +- echo '#include "conftst'$i'.h"' >> sub/conftest.c +- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with +- # Solaris 8's {/usr,}/bin/sh. +- touch sub/conftst$i.h +- done +- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. Also, some Intel +- # versions had trouble with output in subdirs +- am__obj=sub/conftest.${OBJEXT-o} +- am__minus_obj="-o $am__obj" +- case $depmode in +- gcc) +- # This depmode causes a compiler race in universal mode. +- test "$am__universal" = false || continue +- ;; +- nosideeffect) +- # after this tag, mechanisms are not by side-effect, so they'll +- # only be used when explicitly requested +- if test "x$enable_dependency_tracking" = xyes; then +- continue +- else +- break +- fi +- ;; +- msvisualcpp | msvcmsys) +- # This compiler won't grok `-c -o', but also, the minuso test has +- # not run yet. These depmodes are late enough in the game, and +- # so weak that their functioning should not be impacted. +- am__obj=conftest.${OBJEXT-o} +- am__minus_obj= +- ;; +- none) break ;; +- esac +- if depmode=$depmode \ +- source=sub/conftest.c object=$am__obj \ +- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ +- >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep $am__obj sub/conftest.Po > /dev/null 2>&1 && +- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +- # icc doesn't choke on unknown options, it will just issue warnings +- # or remarks (even with -Werror). So we grep stderr for any message +- # that says an option was ignored or not supported. +- # When given -MP, icc 7.0 and 7.1 complain thusly: +- # icc: Command line warning: ignoring option '-M'; no argument required +- # The diagnosis changed in icc 8.0: +- # icc: Command line remark: option '-MP' not supported +- if (grep 'ignoring option' conftest.err || +- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else +- am_cv_$1_dependencies_compiler_type=$depmode +- break +- fi +- fi +- done ++# lt_join(SEP, ARG1, [ARG2...]) ++# ----------------------------- ++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their ++# associated separator. ++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier ++# versions in m4sugar had bugs. ++m4_define([lt_join], ++[m4_if([$#], [1], [], ++ [$#], [2], [[$2]], ++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) ++m4_define([_lt_join], ++[m4_if([$#$2], [2], [], ++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + +- cd .. +- rm -rf conftest.dir +-else +- am_cv_$1_dependencies_compiler_type=none +-fi +-]) +-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +-AM_CONDITIONAL([am__fastdep$1], [ +- test "x$enable_dependency_tracking" != xno \ +- && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +-]) + ++# lt_car(LIST) ++# lt_cdr(LIST) ++# ------------ ++# Manipulate m4 lists. ++# These macros are necessary as long as will still need to support ++# Autoconf-2.59 which quotes differently. ++m4_define([lt_car], [[$1]]) ++m4_define([lt_cdr], ++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], ++ [$#], 1, [], ++ [m4_dquote(m4_shift($@))])]) ++m4_define([lt_unquote], $1) + +-# AM_SET_DEPDIR +-# ------------- +-# Choose a directory name for dependency files. +-# This macro is AC_REQUIREd in _AM_DEPENDENCIES +-AC_DEFUN([AM_SET_DEPDIR], +-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +-]) + ++# lt_append(MACRO-NAME, STRING, [SEPARATOR]) ++# ------------------------------------------ ++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. ++# Note that neither SEPARATOR nor STRING are expanded; they are appended ++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). ++# No SEPARATOR is output if MACRO-NAME was previously undefined (different ++# than defined and empty). ++# ++# This macro is needed until we can rely on Autoconf 2.62, since earlier ++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. ++m4_define([lt_append], ++[m4_define([$1], ++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + +-# AM_DEP_TRACK +-# ------------ +-AC_DEFUN([AM_DEP_TRACK], +-[AC_ARG_ENABLE(dependency-tracking, +-[ --disable-dependency-tracking speeds up one-time build +- --enable-dependency-tracking do not reject slow dependency extractors]) +-if test "x$enable_dependency_tracking" != xno; then +- am_depcomp="$ac_aux_dir/depcomp" +- AMDEPBACKSLASH='\' +-fi +-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH])dnl +-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +-]) + +-# Generate code to set up dependency tracking. -*- Autoconf -*- + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) ++# ---------------------------------------------------------- ++# Produce a SEP delimited list of all paired combinations of elements of ++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list ++# has the form PREFIXmINFIXSUFFIXn. ++# Needed until we can rely on m4_combine added in Autoconf 2.62. ++m4_define([lt_combine], ++[m4_if(m4_eval([$# > 3]), [1], ++ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl ++[[m4_foreach([_Lt_prefix], [$2], ++ [m4_foreach([_Lt_suffix], ++ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, ++ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + +-#serial 5 + +-# _AM_OUTPUT_DEPENDENCY_COMMANDS +-# ------------------------------ +-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +-[{ +- # Autoconf 2.62 quotes --file arguments for eval, but not when files +- # are listed without --file. Let's play safe and only enable the eval +- # if we detect the quoting. +- case $CONFIG_FILES in +- *\'*) eval set x "$CONFIG_FILES" ;; +- *) set x $CONFIG_FILES ;; +- esac +- shift +- for mf +- do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then +- dirpart=`AS_DIRNAME("$mf")` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`AS_DIRNAME(["$file"])` +- AS_MKDIR_P([$dirpart/$fdir]) +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done +- done +-} +-])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) ++# ----------------------------------------------------------------------- ++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited ++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. ++m4_define([lt_if_append_uniq], ++[m4_ifdef([$1], ++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], ++ [lt_append([$1], [$2], [$3])$4], ++ [$5])], ++ [lt_append([$1], [$2], [$3])$4])]) + + +-# AM_OUTPUT_DEPENDENCY_COMMANDS ++# lt_dict_add(DICT, KEY, VALUE) + # ----------------------------- +-# This macro should only be invoked once -- use via AC_REQUIRE. +-# +-# This code is only required when automatic dependency tracking +-# is enabled. FIXME. This creates each `.P' file that we will +-# need in order to bootstrap the dependency handling code. +-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +-[AC_CONFIG_COMMANDS([depfiles], +- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], +- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +-]) ++m4_define([lt_dict_add], ++[m4_define([$1($2)], [$3])]) + +-# Do all the work for Automake. -*- Autoconf -*- + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) ++# -------------------------------------------- ++m4_define([lt_dict_add_subkey], ++[m4_define([$1($2:$3)], [$4])]) + +-# serial 16 + +-# This macro actually does too much. Some checks are only needed if +-# your package does certain things. But this isn't really a big deal. ++# lt_dict_fetch(DICT, KEY, [SUBKEY]) ++# ---------------------------------- ++m4_define([lt_dict_fetch], ++[m4_ifval([$3], ++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), ++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + +-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +-# AM_INIT_AUTOMAKE([OPTIONS]) +-# ----------------------------------------------- +-# The call with PACKAGE and VERSION arguments is the old style +-# call (pre autoconf-2.50), which is being phased out. PACKAGE +-# and VERSION should now be passed to AC_INIT and removed from +-# the call to AM_INIT_AUTOMAKE. +-# We support both call styles for the transition. After +-# the next Automake release, Autoconf can make the AC_INIT +-# arguments mandatory, and then we can depend on a new Autoconf +-# release and drop the old call support. +-AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.62])dnl +-dnl Autoconf wants to disallow AM_ names. We explicitly allow +-dnl the ones we care about. +-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +-AC_REQUIRE([AC_PROG_INSTALL])dnl +-if test "`cd $srcdir && pwd`" != "`pwd`"; then +- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output +- # is not polluted with repeated "-I." +- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl +- # test to see if srcdir already configured +- if test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +- fi +-fi + +-# test whether we have cygpath +-if test -z "$CYGPATH_W"; then +- if (cygpath --version) >/dev/null 2>/dev/null; then +- CYGPATH_W='cygpath -w' +- else +- CYGPATH_W=echo +- fi +-fi +-AC_SUBST([CYGPATH_W]) ++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) ++# ----------------------------------------------------------------- ++m4_define([lt_if_dict_fetch], ++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], ++ [$5], ++ [$6])]) + +-# Define the identity of the package. +-dnl Distinguish between old-style and new-style calls. +-m4_ifval([$2], +-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +- AC_SUBST([PACKAGE], [$1])dnl +- AC_SUBST([VERSION], [$2])], +-[_AM_SET_OPTIONS([$1])dnl +-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl +- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl +- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +-_AM_IF_OPTION([no-define],, +-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) ++# -------------------------------------------------------------- ++m4_define([lt_dict_filter], ++[m4_if([$5], [], [], ++ [lt_join(m4_quote(m4_default([$4], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), ++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ++]) + +-# Some tools Automake needs. +-AC_REQUIRE([AM_SANITY_CHECK])dnl +-AC_REQUIRE([AC_ARG_PROGRAM])dnl +-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +-AM_MISSING_PROG(AUTOCONF, autoconf) +-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +-AM_MISSING_PROG(AUTOHEADER, autoheader) +-AM_MISSING_PROG(MAKEINFO, makeinfo) +-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +-AC_REQUIRE([AM_PROG_MKDIR_P])dnl +-# We need awk for the "check" target. The system "awk" is bad on +-# some platforms. +-AC_REQUIRE([AC_PROG_AWK])dnl +-AC_REQUIRE([AC_PROG_MAKE_SET])dnl +-AC_REQUIRE([AM_SET_LEADING_DOT])dnl +-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], +- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], +- [_AM_PROG_TAR([v7])])]) +-_AM_IF_OPTION([no-dependencies],, +-[AC_PROVIDE_IFELSE([AC_PROG_CC], +- [_AM_DEPENDENCIES(CC)], +- [define([AC_PROG_CC], +- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [_AM_DEPENDENCIES(CXX)], +- [define([AC_PROG_CXX], +- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_OBJC], +- [_AM_DEPENDENCIES(OBJC)], +- [define([AC_PROG_OBJC], +- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +-]) +-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +-AC_CONFIG_COMMANDS_PRE(dnl +-[m4_provide_if([_AM_COMPILER_EXEEXT], +- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +-]) +- +-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +-dnl mangled by Autoconf and run in a shell conditional statement. +-m4_define([_AC_COMPILER_EXEEXT], +-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) ++# ltversion.m4 -- version numbers -*- Autoconf -*- ++# ++# Copyright (C) 2004 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. + ++# Generated from ltversion.in. + +-# When config.status generates a header, we must update the stamp-h file. +-# This file resides in the same directory as the config header +-# that is generated. The stamp files are numbered to have different names. ++# serial 3017 ltversion.m4 ++# This file is part of GNU Libtool + +-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +-# loop where config.status creates the headers, so we can generate +-# our stamp files there. +-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +-[# Compute $1's index in $config_headers. +-_am_arg=$1 +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $_am_arg | $_am_arg:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; +- esac +-done +-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++m4_define([LT_PACKAGE_VERSION], [2.2.6b]) ++m4_define([LT_PACKAGE_REVISION], [1.3017]) + +-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_DEFUN([LTVERSION_VERSION], ++[macro_version='2.2.6b' ++macro_revision='1.3017' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) ++]) + +-# AM_PROG_INSTALL_SH +-# ------------------ +-# Define $install_sh. +-AC_DEFUN([AM_PROG_INSTALL_SH], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-if test x"${install_sh}" != xset; then +- case $am_aux_dir in +- *\ * | *\ *) +- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; +- *) +- install_sh="\${SHELL} $am_aux_dir/install-sh" +- esac +-fi +-AC_SUBST(install_sh)]) ++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004. ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. + +-# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# serial 4 lt~obsolete.m4 ++ ++# These exist entirely to fool aclocal when bootstrapping libtool. + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) ++# which have later been changed to m4_define as they aren't part of the ++# exported API, or moved to Autoconf or Automake where they belong. ++# ++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN ++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us ++# using a macro with the same name in our local m4/libtool.m4 it'll ++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define ++# and doesn't know about Autoconf macros at all.) ++# ++# So we provide this file, which has a silly filename so it's always ++# included after everything else. This provides aclocal with the ++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything ++# because those macros already exist, or will be overwritten later. ++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. ++# ++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. ++# Yes, that means every name once taken will need to remain here until ++# we give up compatibility with versions before 1.7, at which point ++# we need to keep only those names which we still refer to. + +-# serial 2 ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +-# Check whether the underlying file-system supports filenames +-# with a leading dot. For instance MS-DOS doesn't. +-AC_DEFUN([AM_SET_LEADING_DOT], +-[rm -rf .tst 2>/dev/null +-mkdir .tst 2>/dev/null +-if test -d .tst; then +- am__leading_dot=. +-else +- am__leading_dot=_ +-fi +-rmdir .tst 2>/dev/null +-AC_SUBST([am__leading_dot])]) ++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) ++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) ++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) ++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) ++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) ++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) ++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) ++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) ++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) ++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) ++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) ++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) ++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) ++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) ++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) ++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) ++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) ++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) ++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) ++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) ++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) ++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) ++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) ++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) ++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) ++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) ++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) ++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) ++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) ++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) ++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) ++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) ++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) ++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) ++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) ++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) ++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) ++m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) ++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) ++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) + +-# Check to see how 'make' treats includes. -*- Autoconf -*- ++# nls.m4 serial 3 (gettext-0.15) ++dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. + +-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl Authors: ++dnl Ulrich Drepper , 1995-2000. ++dnl Bruno Haible , 2000-2003. + +-# serial 4 ++AC_PREREQ(2.50) + +-# AM_MAKE_INCLUDE() +-# ----------------- +-# Check to see how make treats includes. +-AC_DEFUN([AM_MAKE_INCLUDE], +-[am_make=${MAKE-make} +-cat > confinc << 'END' +-am__doit: +- @echo this is the am__doit target +-.PHONY: am__doit +-END +-# If we don't find an include directive, just comment out the code. +-AC_MSG_CHECKING([for style of include used by $am_make]) +-am__include="#" +-am__quote= +-_am_result=none +-# First try GNU make style include. +-echo "include confinc" > confmf +-# Ignore all kinds of additional output from `make'. +-case `$am_make -s -f confmf 2> /dev/null` in #( +-*the\ am__doit\ target*) +- am__include=include +- am__quote= +- _am_result=GNU +- ;; +-esac +-# Now try BSD make style include. +-if test "$am__include" = "#"; then +- echo '.include "confinc"' > confmf +- case `$am_make -s -f confmf 2> /dev/null` in #( +- *the\ am__doit\ target*) +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- ;; +- esac +-fi +-AC_SUBST([am__include]) +-AC_SUBST([am__quote]) +-AC_MSG_RESULT([$_am_result]) +-rm -f confinc confmf ++AC_DEFUN([AM_NLS], ++[ ++ AC_MSG_CHECKING([whether NLS is requested]) ++ dnl Default is enabled NLS ++ AC_ARG_ENABLE(nls, ++ [ --disable-nls do not use Native Language Support], ++ USE_NLS=$enableval, USE_NLS=yes) ++ AC_MSG_RESULT($USE_NLS) ++ AC_SUBST(USE_NLS) + ]) + +-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 +-# Free Software Foundation, Inc. ++# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- ++# ++# Copyright © 2004 Scott James Remnant . + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. +- +-# serial 6 ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. + +-# AM_PROG_CC_C_O +-# -------------- +-# Like AC_PROG_CC_C_O, but changed for automake. +-AC_DEFUN([AM_PROG_CC_C_O], +-[AC_REQUIRE([AC_PROG_CC_C_O])dnl +-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([compile])dnl +-# FIXME: we rely on the cache variable name because +-# there is no other way. +-set dummy $CC +-am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` +-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +-if test "$am_t" != yes; then +- # Losing compiler, so override with the script. +- # FIXME: It is wrong to rewrite CC. +- # But if we don't then we get into trouble of one sort or another. +- # A longer-term fix would be to have automake use am__CC in this case, +- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" +- CC="$am_aux_dir/compile $CC" ++# PKG_PROG_PKG_CONFIG([MIN-VERSION]) ++# ---------------------------------- ++AC_DEFUN([PKG_PROG_PKG_CONFIG], ++[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) + fi +-dnl Make sure AC_PROG_CC is never called again, or it will override our +-dnl setting of CC. +-m4_define([AC_PROG_CC], +- [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) +-]) +- +-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=m4_default([$1], [0.9.0]) ++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ PKG_CONFIG="" ++ fi ++ ++fi[]dnl ++])# PKG_PROG_PKG_CONFIG + +-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +-# Free Software Foundation, Inc. ++# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# Check to see whether a particular set of modules exists. Similar ++# to PKG_CHECK_MODULES(), but does not set variables or print errors. ++# ++# ++# Similar to PKG_CHECK_MODULES, make sure that the first instance of ++# this or PKG_CHECK_MODULES is called, or make sure to call ++# PKG_CHECK_EXISTS manually ++# -------------------------------------------------------------- ++AC_DEFUN([PKG_CHECK_EXISTS], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++if test -n "$PKG_CONFIG" && \ ++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then ++ m4_ifval([$2], [$2], [:]) ++m4_ifvaln([$3], [else ++ $3])dnl ++fi]) ++ ++ ++# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) ++# --------------------------------------------- ++m4_define([_PKG_CONFIG], ++[if test -n "$PKG_CONFIG"; then ++ if test -n "$$1"; then ++ pkg_cv_[]$1="$$1" ++ else ++ PKG_CHECK_EXISTS([$3], ++ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], ++ [pkg_failed=yes]) ++ fi ++else ++ pkg_failed=untried ++fi[]dnl ++])# _PKG_CONFIG + +-# serial 6 ++# _PKG_SHORT_ERRORS_SUPPORTED ++# ----------------------------- ++AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi[]dnl ++])# _PKG_SHORT_ERRORS_SUPPORTED + +-# AM_MISSING_PROG(NAME, PROGRAM) +-# ------------------------------ +-AC_DEFUN([AM_MISSING_PROG], +-[AC_REQUIRE([AM_MISSING_HAS_RUN]) +-$1=${$1-"${am_missing_run}$2"} +-AC_SUBST($1)]) + ++# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], ++# [ACTION-IF-NOT-FOUND]) ++# ++# ++# Note that if there is a possibility the first call to ++# PKG_CHECK_MODULES might not happen, you should be sure to include an ++# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac ++# ++# ++# -------------------------------------------------------------- ++AC_DEFUN([PKG_CHECK_MODULES], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl ++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +-# AM_MISSING_HAS_RUN +-# ------------------ +-# Define MISSING if not defined so far and test if it supports --run. +-# If it does, set am_missing_run to use it, otherwise, to nothing. +-AC_DEFUN([AM_MISSING_HAS_RUN], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([missing])dnl +-if test x"${MISSING+set}" != xset; then +- case $am_aux_dir in +- *\ * | *\ *) +- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; +- *) +- MISSING="\${SHELL} $am_aux_dir/missing" ;; +- esac +-fi +-# Use eval to expand $SHELL +-if eval "$MISSING --run true"; then +- am_missing_run="$MISSING --run " +-else +- am_missing_run= +- AC_MSG_WARN([`missing' script is too old or missing]) +-fi +-]) ++pkg_failed=no ++AC_MSG_CHECKING([for $1]) + +-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) ++_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +-# AM_PROG_MKDIR_P +-# --------------- +-# Check for `mkdir -p'. +-AC_DEFUN([AM_PROG_MKDIR_P], +-[AC_PREREQ([2.60])dnl +-AC_REQUIRE([AC_PROG_MKDIR_P])dnl +-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +-dnl while keeping a definition of mkdir_p for backward compatibility. +-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +-dnl Makefile.ins that do not define MKDIR_P, so we do our own +-dnl adjustment using top_builddir (which is defined more often than +-dnl MKDIR_P). +-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +-case $mkdir_p in +- [[\\/$]]* | ?:[[\\/]]*) ;; +- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +-esac +-]) ++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS ++and $1[]_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details.]) + +-# Helper functions for option handling. -*- Autoconf -*- ++if test $pkg_failed = yes; then ++ _PKG_SHORT_ERRORS_SUPPORTED ++ if test $_pkg_short_errors_supported = yes; then ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` ++ else ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + +-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ ifelse([$4], , [AC_MSG_ERROR(dnl ++[Package requirements ($2) were not met: + +-# serial 4 ++$$1_PKG_ERRORS + +-# _AM_MANGLE_OPTION(NAME) +-# ----------------------- +-AC_DEFUN([_AM_MANGLE_OPTION], +-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# _AM_SET_OPTION(NAME) +-# ------------------------------ +-# Set option NAME. Presently that only means defining a flag for this option. +-AC_DEFUN([_AM_SET_OPTION], +-[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++_PKG_TEXT ++])], ++ [AC_MSG_RESULT([no]) ++ $4]) ++elif test $pkg_failed = untried; then ++ ifelse([$4], , [AC_MSG_FAILURE(dnl ++[The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# _AM_SET_OPTIONS(OPTIONS) +-# ---------------------------------- +-# OPTIONS is a space-separated list of Automake options. +-AC_DEFUN([_AM_SET_OPTIONS], +-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++_PKG_TEXT + +-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +-# ------------------------------------------- +-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +-AC_DEFUN([_AM_IF_OPTION], +-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++To get pkg-config, see .])], ++ [$4]) ++else ++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS ++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS ++ AC_MSG_RESULT([yes]) ++ ifelse([$3], , :, [$3]) ++fi[]dnl ++])# PKG_CHECK_MODULES + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# AM_RUN_LOG(COMMAND) +-# ------------------- +-# Run COMMAND, save the exit status in ac_status, and log it. +-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +-AC_DEFUN([AM_RUN_LOG], +-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD +- ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD +- (exit $ac_status); }]) ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +-# Check to make sure that the build environment is sane. -*- Autoconf -*- ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION so it can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++ [AM_AUTOMAKE_VERSION([1.9.6])]) + +-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +-# Free Software Foundation, Inc. ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 5 +- +-# AM_SANITY_CHECK +-# --------------- +-AC_DEFUN([AM_SANITY_CHECK], +-[AC_MSG_CHECKING([whether build environment is sane]) +-# Just in case +-sleep 1 +-echo timestamp > conftest.file +-# Reject unsafe characters in $srcdir or the absolute working directory +-# name. Accept space and tab only in the latter. +-am_lf=' +-' +-case `pwd` in +- *[[\\\"\#\$\&\'\`$am_lf]]*) +- AC_MSG_ERROR([unsafe absolute working directory name]);; +-esac +-case $srcdir in +- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) +- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +-esac +- +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` +- if test "$[*]" = "X"; then +- # -L didn't work. +- set X `ls -t "$srcdir/configure" conftest.file` +- fi +- rm -f conftest.file +- if test "$[*]" != "X $srcdir/configure conftest.file" \ +- && test "$[*]" != "X conftest.file $srcdir/configure"; then ++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ++# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++# ++# Of course, Automake must honor this variable whenever it calls a ++# tool from the auxiliary directory. The problem is that $srcdir (and ++# therefore $ac_aux_dir as well) can be either absolute or relative, ++# depending on how configure is run. This is pretty annoying, since ++# it makes $ac_aux_dir quite unusable in subdirectories: in the top ++# source directory, any form will work fine, but in subdirectories a ++# relative path needs to be adjusted first. ++# ++# $ac_aux_dir/missing ++# fails when called from a subdirectory if $ac_aux_dir is relative ++# $top_srcdir/$ac_aux_dir/missing ++# fails if $ac_aux_dir is absolute, ++# fails when called from a subdirectory in a VPATH build with ++# a relative $ac_aux_dir ++# ++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir ++# are both prefixed by $srcdir. In an in-source build this is usually ++# harmless because $srcdir is `.', but things will broke when you ++# start a VPATH build or use an absolute $srcdir. ++# ++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ++# iff we strip the leading $srcdir from $ac_aux_dir. That would be: ++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ++# and then we would define $MISSING as ++# MISSING="\${SHELL} $am_aux_dir/missing" ++# This will work as long as MISSING is not called from configure, because ++# unfortunately $(top_srcdir) has no meaning in configure. ++# However there are other variables, like CC, which are often used in ++# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# ++# Another solution, used here, is to always expand $ac_aux_dir to an ++# absolute PATH. The drawback is that using absolute paths prevent a ++# configured tree to be moved without reconfiguration. + +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +-alias in your environment]) +- fi ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) + +- test "$[2]" = conftest.file +- ) +-then +- # Ok. +- : +-else +- AC_MSG_ERROR([newly created file is older than distributed files! +-Check your system clock]) +-fi +-AC_MSG_RESULT(yes)]) ++# AM_CONDITIONAL -*- Autoconf -*- + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# AM_PROG_INSTALL_STRIP +-# --------------------- +-# One issue with vendor `install' (even GNU) is that you can't +-# specify the program used to strip binaries. This is especially +-# annoying in cross-compiling environments, where the build's strip +-# is unlikely to handle the host's binaries. +-# Fortunately install-sh will honor a STRIPPROG variable, so we +-# always use install-sh in `make install-strip', and initialize +-# STRIPPROG with the value of the STRIP variable (set by the user). +-AC_DEFUN([AM_PROG_INSTALL_STRIP], +-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +-if test "$cross_compiling" != no; then +- AC_CHECK_TOOL([STRIP], [strip], :) ++# serial 7 ++ ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE]) ++AC_SUBST([$1_FALSE]) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= + fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +-AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) + +-# Copyright (C) 2006, 2008 Free Software Foundation, Inc. ++ ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # + # This file is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. + +-# serial 2 +- +-# _AM_SUBST_NOTMAKE(VARIABLE) +-# --------------------------- +-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +-# This macro is traced by Automake. +-AC_DEFUN([_AM_SUBST_NOTMAKE]) ++# serial 8 + +-# AM_SUBST_NOTMAKE(VARIABLE) +-# --------------------------- +-# Public sister of _AM_SUBST_NOTMAKE. +-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) ++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ++# written in clear, in which case automake, when reading aclocal.m4, ++# will think it sees a *use*, and therefore will trigger all it's ++# C support machinery. Also note that it means that autoscan, seeing ++# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + +-# Check how to create a tarball. -*- Autoconf -*- + +-# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# _AM_DEPENDENCIES(NAME) ++# ---------------------- ++# See how the compiler implements dependency checking. ++# NAME is "CC", "CXX", "GCJ", or "OBJC". ++# We try a few techniques and use that to set a single cache variable. + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ++# dependency, and given that the user is not expected to run this macro, ++# just rely on AC_PROG_CC. ++AC_DEFUN([_AM_DEPENDENCIES], ++[AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl + +-# serial 2 ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) + +-# _AM_PROG_TAR(FORMAT) +-# -------------------- +-# Check how to create a tarball in format FORMAT. +-# FORMAT should be one of `v7', `ustar', or `pax'. +-# +-# Substitute a variable $(am__tar) that is a command +-# writing to stdout a FORMAT-tarball containing the directory +-# $tardir. +-# tardir=directory && $(am__tar) > result.tar +-# +-# Substitute a variable $(am__untar) that extract such +-# a tarball read from stdin. +-# $(am__untar) < result.tar +-AC_DEFUN([_AM_PROG_TAR], +-[# Always define AMTAR for backward compatibility. +-AM_MISSING_PROG([AMTAR], [tar]) +-m4_if([$1], [v7], +- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], +- [m4_case([$1], [ustar],, [pax],, +- [m4_fatal([Unknown tar format])]) +-AC_MSG_CHECKING([how to create a $1 tar archive]) +-# Loop over all known methods to create a tar archive until one works. +-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +-_am_tools=${am_cv_prog_tar_$1-$_am_tools} +-# Do not fold the above two line into one, because Tru64 sh and +-# Solaris sh will not grok spaces in the rhs of `-'. +-for _am_tool in $_am_tools +-do +- case $_am_tool in +- gnutar) +- for _am_tar in tar gnutar gtar; +- do +- AM_RUN_LOG([$_am_tar --version]) && break ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h + done +- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' +- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' +- am__untar="$_am_tar -xf -" +- ;; +- plaintar) +- # Must skip GNU tar: if it does not support --format= it doesn't create +- # ustar tarball either. +- (tar --version) >/dev/null 2>&1 && continue +- am__tar='tar chf - "$$tardir"' +- am__tar_='tar chf - "$tardir"' +- am__untar='tar xf -' +- ;; +- pax) +- am__tar='pax -L -x $1 -w "$$tardir"' +- am__tar_='pax -L -x $1 -w "$tardir"' +- am__untar='pax -r' +- ;; +- cpio) +- am__tar='find "$$tardir" -print | cpio -o -H $1 -L' +- am__tar_='find "$tardir" -print | cpio -o -H $1 -L' +- am__untar='cpio -i -H $1 -d' +- ;; +- none) +- am__tar=false +- am__tar_=false +- am__untar=false +- ;; +- esac ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- # If the value was cached, stop now. We just wanted to have am__tar +- # and am__untar set. +- test -n "${am_cv_prog_tar_$1}" && break ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done + +- # tar/untar a dummy directory, and stop if the command works +- rm -rf conftest.dir +- mkdir conftest.dir +- echo GrepMe > conftest.dir/file +- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ cd .. + rm -rf conftest.dir +- if test -s conftest.tar; then +- AM_RUN_LOG([$am__untar /dev/null 2>&1 && break +- fi +-done +-rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) + +-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +-AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +-AC_SUBST([am__tar]) +-AC_SUBST([am__untar]) +-]) # _AM_PROG_TAR + +-dnl AM_GCONF_SOURCE_2 +-dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas +-dnl (i.e. pass to gconftool-2 +-dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where +-dnl you should install foo.schemas files +-dnl ++# AM_SET_DEPDIR ++# ------------- ++# Choose a directory name for dependency files. ++# This macro is AC_REQUIREd in _AM_DEPENDENCIES ++AC_DEFUN([AM_SET_DEPDIR], ++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) + +-AC_DEFUN([AM_GCONF_SOURCE_2], +-[ +- if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then +- GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` +- else +- GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE +- fi + +- AC_ARG_WITH([gconf-source], +- AC_HELP_STRING([--with-gconf-source=sourceaddress], +- [Config database for installing schema files.]), +- [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) ++# AM_DEP_TRACK ++# ------------ ++AC_DEFUN([AM_DEP_TRACK], ++[AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH]) ++]) ++ ++# Generate code to set up dependency tracking. -*- Autoconf -*- ++ ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) +- AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) ++#serial 3 + +- if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then +- GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# ------------------------------ ++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], ++[for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue + fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++])# _AM_OUTPUT_DEPENDENCY_COMMANDS + +- AC_ARG_WITH([gconf-schema-file-dir], +- AC_HELP_STRING([--with-gconf-schema-file-dir=dir], +- [Directory for installing schema files.]), +- [GCONF_SCHEMA_FILE_DIR="$withval"],) +- +- AC_SUBST(GCONF_SCHEMA_FILE_DIR) +- AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) + +- AC_ARG_ENABLE(schemas-install, +- AC_HELP_STRING([--disable-schemas-install], +- [Disable the schemas installation]), +- [case ${enableval} in +- yes|no) ;; +- *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-install]) ;; +- esac]) +- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++# AM_OUTPUT_DEPENDENCY_COMMANDS ++# ----------------------------- ++# This macro should only be invoked once -- use via AC_REQUIRE. ++# ++# This code is only required when automatic dependency tracking ++# is enabled. FIXME. This creates each `.P' file that we will ++# need in order to bootstrap the dependency handling code. ++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], ++[AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) + ]) + +-# Copyright (C) 1995-2002 Free Software Foundation, Inc. +-# Copyright (C) 2001-2003,2004 Red Hat, Inc. +-# +-# This file is free software, distributed under the terms of the GNU +-# General Public License. As a special exception to the GNU General +-# Public License, this file may be distributed as part of a program +-# that contains a configuration script generated by Autoconf, under +-# the same distribution terms as the rest of that program. +-# +-# This file can be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# +-# Macro to add for using GNU gettext. +-# Ulrich Drepper , 1995, 1996 +-# +-# Modified to never use included libintl. +-# Owen Taylor , 12/15/1998 +-# +-# Major rework to remove unused code +-# Owen Taylor , 12/11/2002 +-# +-# Added better handling of ALL_LINGUAS from GNU gettext version +-# written by Bruno Haible, Owen Taylor 5/30/3002 +-# +-# Modified to require ngettext +-# Matthias Clasen 08/06/2004 ++# Do all the work for Automake. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # +-# We need this here as well, since someone might use autoconf-2.5x +-# to configure GLib then an older version to configure a package +-# using AM_GLIB_GNU_GETTEXT +-AC_PREREQ(2.53) ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-dnl +-dnl We go to great lengths to make sure that aclocal won't +-dnl try to pull in the installed version of these macros +-dnl when running aclocal in the glib directory. +-dnl +-m4_copy([AC_DEFUN],[glib_DEFUN]) +-m4_copy([AC_REQUIRE],[glib_REQUIRE]) +-dnl +-dnl At the end, if we're not within glib, we'll define the public +-dnl definitions in terms of our private definitions. +-dnl ++# serial 12 + +-# GLIB_LC_MESSAGES +-#-------------------- +-glib_DEFUN([GLIB_LC_MESSAGES], +- [AC_CHECK_HEADERS([locale.h]) +- if test $ac_cv_header_locale_h = yes; then +- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, +- [AC_TRY_LINK([#include ], [return LC_MESSAGES], +- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) +- if test $am_cv_val_LC_MESSAGES = yes; then +- AC_DEFINE(HAVE_LC_MESSAGES, 1, +- [Define if your file defines LC_MESSAGES.]) +- fi +- fi]) ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. + +-# GLIB_PATH_PROG_WITH_TEST +-#---------------------------- +-dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +-glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], +-[# Extract the first word of "$2", so it can be a program name with args. +-set dummy $2; ac_word=[$]2 +-AC_MSG_CHECKING([for $ac_word]) +-AC_CACHE_VAL(ac_cv_path_$1, +-[case "[$]$1" in +- /*) +- ac_cv_path_$1="[$]$1" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in ifelse([$5], , $PATH, [$5]); do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if [$3]; then +- ac_cv_path_$1="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +-dnl If no 4th arg is given, leave the cache variable unset, +-dnl so AC_PATH_PROGS will keep looking. +-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +-])dnl +- ;; +-esac])dnl +-$1="$ac_cv_path_$1" +-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then +- AC_MSG_RESULT([$]$1) +-else +- AC_MSG_RESULT(no) ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.58])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +-AC_SUBST($1)dnl +-]) + +-# GLIB_WITH_NLS +-#----------------- +-glib_DEFUN([GLIB_WITH_NLS], +- dnl NLS is obligatory +- [USE_NLS=yes +- AC_SUBST(USE_NLS) ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) + +- gt_cv_have_gettext=no ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +- CATOBJEXT=NONE +- XGETTEXT=: +- INTLLIBS= ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +- AC_CHECK_HEADER(libintl.h, +- [gt_cv_func_dgettext_libintl="no" +- libintl_extra_libs="" ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++]) + +- # +- # First check in libc +- # +- AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, +- [AC_TRY_LINK([ +-#include +-], +- [return !ngettext ("","", 1)], +- gt_cv_func_ngettext_libc=yes, +- gt_cv_func_ngettext_libc=no) +- ]) +- +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, +- [AC_TRY_LINK([ +-#include +-], +- [return !dgettext ("","")], +- gt_cv_func_dgettext_libc=yes, +- gt_cv_func_dgettext_libc=no) +- ]) +- fi +- +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- AC_CHECK_FUNCS(bind_textdomain_codeset) +- fi + +- # +- # If we don't have everything we want, check in libintl +- # +- if test "$gt_cv_func_dgettext_libc" != "yes" \ +- || test "$gt_cv_func_ngettext_libc" != "yes" \ +- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then +- +- AC_CHECK_LIB(intl, bindtextdomain, +- [AC_CHECK_LIB(intl, ngettext, +- [AC_CHECK_LIB(intl, dgettext, +- gt_cv_func_dgettext_libintl=yes)])]) ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $1 | $1:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- AC_MSG_CHECKING([if -liconv is needed to use gettext]) +- AC_MSG_RESULT([]) +- AC_CHECK_LIB(intl, ngettext, +- [AC_CHECK_LIB(intl, dcgettext, +- [gt_cv_func_dgettext_libintl=yes +- libintl_extra_libs=-liconv], +- :,-liconv)], +- :,-liconv) +- fi ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) + +- # +- # If we found libintl, then check in it for bind_textdomain_codeset(); +- # we'll prefer libc if neither have bind_textdomain_codeset(), +- # and both have dgettext and ngettext +- # +- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS -lintl $libintl_extra_libs" +- unset ac_cv_func_bind_textdomain_codeset +- AC_CHECK_FUNCS(bind_textdomain_codeset) +- LIBS="$glib_save_LIBS" ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then +- gt_cv_func_dgettext_libc=no +- else +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- && test "$gt_cv_func_ngettext_libc" = "yes"; then +- gt_cv_func_dgettext_libintl=no +- fi +- fi +- fi +- fi ++# serial 2 + +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- || test "$gt_cv_func_dgettext_libintl" = "yes"; then +- gt_cv_have_gettext=yes +- fi +- +- if test "$gt_cv_func_dgettext_libintl" = "yes"; then +- INTLLIBS="-lintl $libintl_extra_libs" +- fi +- +- if test "$gt_cv_have_gettext" = "yes"; then +- AC_DEFINE(HAVE_GETTEXT,1, +- [Define if the GNU gettext() function is already present or preinstalled.]) +- GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl +- if test "$MSGFMT" != "no"; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS $INTLLIBS" +- AC_CHECK_FUNCS(dcgettext) +- MSGFMT_OPTS= +- AC_MSG_CHECKING([if msgfmt accepts -c]) +- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ +-msgid "" +-msgstr "" +-"Content-Type: text/plain; charset=UTF-8\n" +-"Project-Id-Version: test 1.0\n" +-"PO-Revision-Date: 2007-02-15 12:01+0100\n" +-"Last-Translator: test \n" +-"Language-Team: C \n" +-"MIME-Version: 1.0\n" +-"Content-Transfer-Encoding: 8bit\n" +-], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) +- AC_SUBST(MSGFMT_OPTS) +- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +- GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) +- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr], +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [case $host in +- *-*-solaris*) +- dnl On Solaris, if bind_textdomain_codeset is in libc, +- dnl GNU format message catalog is always supported, +- dnl since both are added to the libc all together. +- dnl Hence, we'd like to go with DATADIRNAME=share and +- dnl and CATOBJEXT=.gmo in this case. +- AC_CHECK_FUNC(bind_textdomain_codeset, +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [CATOBJEXT=.mo +- DATADIRNAME=lib]) +- ;; +- *) +- CATOBJEXT=.mo +- DATADIRNAME=lib +- ;; +- esac]) +- LIBS="$glib_save_LIBS" +- INSTOBJEXT=.mo +- else +- gt_cv_have_gettext=no +- fi +- fi +- ]) ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) + +- if test "$gt_cv_have_gettext" = "yes" ; then +- AC_DEFINE(ENABLE_NLS, 1, +- [always defined to indicate that i18n is enabled]) +- fi ++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- ++# From Jim Meyering + +- dnl Test whether we really found GNU xgettext. +- if test "$XGETTEXT" != ":"; then +- dnl If it is not GNU xgettext we define it as : so that the +- dnl Makefiles still can work. +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- AC_MSG_RESULT( +- [found xgettext program is not GNU xgettext; ignore it]) +- XGETTEXT=":" +- fi +- fi ++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- # We need to process the po/ directory. +- POSUB=po ++# serial 4 + +- AC_OUTPUT_COMMANDS( +- [case "$CONFIG_FILES" in *po/Makefile.in*) +- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile +- esac]) ++AC_DEFUN([AM_MAINTAINER_MODE], ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode is disabled by default ++ AC_ARG_ENABLE(maintainer-mode, ++[ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer], ++ USE_MAINTAINER_MODE=$enableval, ++ USE_MAINTAINER_MODE=no) ++ AC_MSG_RESULT([$USE_MAINTAINER_MODE]) ++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) ++ MAINT=$MAINTAINER_MODE_TRUE ++ AC_SUBST(MAINT)dnl ++] ++) + +- dnl These rules are solely for the distribution goal. While doing this +- dnl we only have to keep exactly one list of the available catalogs +- dnl in configure.in. +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" +- done ++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +- dnl Make all variables we use known to autoconf. +- AC_SUBST(CATALOGS) +- AC_SUBST(CATOBJEXT) +- AC_SUBST(DATADIRNAME) +- AC_SUBST(GMOFILES) +- AC_SUBST(INSTOBJEXT) +- AC_SUBST(INTLLIBS) +- AC_SUBST(PO_IN_DATADIR_TRUE) +- AC_SUBST(PO_IN_DATADIR_FALSE) +- AC_SUBST(POFILES) +- AC_SUBST(POSUB) +- ]) ++# Check to see how 'make' treats includes. -*- Autoconf -*- + +-# AM_GLIB_GNU_GETTEXT +-# ------------------- +-# Do checks necessary for use of gettext. If a suitable implementation +-# of gettext is found in either in libintl or in the C library, +-# it will set INTLLIBS to the libraries needed for use of gettext +-# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable +-# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() +-# on various variables needed by the Makefile.in.in installed by +-# glib-gettextize. +-dnl +-glib_DEFUN([GLIB_GNU_GETTEXT], +- [AC_REQUIRE([AC_PROG_CC])dnl +- AC_REQUIRE([AC_HEADER_STDC])dnl +- +- GLIB_LC_MESSAGES +- GLIB_WITH_NLS ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# AM_MAKE_INCLUDE() ++# ----------------- ++# Check to see how make treats includes. ++AC_DEFUN([AM_MAKE_INCLUDE], ++[am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf ++]) ++ ++# Copyright (C) 1999, 2000, 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# AM_PROG_CC_C_O ++# -------------- ++# Like AC_PROG_CC_C_O, but changed for automake. ++AC_DEFUN([AM_PROG_CC_C_O], ++[AC_REQUIRE([AC_PROG_CC_C_O])dnl ++AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++# FIXME: we rely on the cache variable name because ++# there is no other way. ++set dummy $CC ++ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then ++ # Losing compiler, so override with the script. ++ # FIXME: It is wrong to rewrite CC. ++ # But if we don't then we get into trouble of one sort or another. ++ # A longer-term fix would be to have automake use am__CC in this case, ++ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" ++ CC="$am_aux_dir/compile $CC" ++fi ++]) + +- if test "$gt_cv_have_gettext" = "yes"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- AC_MSG_CHECKING(for catalogs to be installed) +- NEW_LINGUAS= +- for presentlang in $ALL_LINGUAS; do +- useit=no +- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then +- desiredlanguages="$LINGUAS" +- else +- desiredlanguages="$ALL_LINGUAS" +- fi +- for desiredlang in $desiredlanguages; do +- # Use the presentlang catalog if desiredlang is +- # a. equal to presentlang, or +- # b. a variant of presentlang (because in this case, +- # presentlang can be used as a fallback for messages +- # which are not translated in the desiredlang catalog). +- case "$desiredlang" in +- "$presentlang"*) useit=yes;; +- esac +- done +- if test $useit = yes; then +- NEW_LINGUAS="$NEW_LINGUAS $presentlang" +- fi +- done +- LINGUAS=$NEW_LINGUAS +- AC_MSG_RESULT($LINGUAS) +- fi ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +- dnl Construct list of names of catalog files to be constructed. +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly +- dnl find the mkinstalldirs script in another subdir but ($top_srcdir). +- dnl Try to locate is. +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi +- AC_SUBST(MKINSTALLDIRS) ++# serial 4 + +- dnl Generate list of files to be processed by xgettext which will +- dnl be included in po/Makefile. +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES +- ]) ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) + +-# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) +-# ------------------------------- +-# Define VARIABLE to the location where catalog files will +-# be installed by po/Makefile. +-glib_DEFUN([GLIB_DEFINE_LOCALEDIR], +-[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl +-glib_save_prefix="$prefix" +-glib_save_exec_prefix="$exec_prefix" +-glib_save_datarootdir="$datarootdir" +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-test "x$exec_prefix" = xNONE && exec_prefix=$prefix +-datarootdir=`eval echo "${datarootdir}"` +-if test "x$CATOBJEXT" = "x.mo" ; then +- localedir=`eval echo "${libdir}/locale"` ++ ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it supports --run. ++# If it does, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " + else +- localedir=`eval echo "${datadir}/locale"` ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) + fi +-prefix="$glib_save_prefix" +-exec_prefix="$glib_save_exec_prefix" +-datarootdir="$glib_save_datarootdir" +-AC_DEFINE_UNQUOTED($1, "$localedir", +- [Define the location where the catalogs will be installed]) + ]) + +-dnl +-dnl Now the definitions that aclocal will find +-dnl +-ifdef(glib_configure_in,[],[ +-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) +-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) +-])dnl ++# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) +-# +-# Create a temporary file with TEST-FILE as its contents and pass the +-# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with +-# 0 and perform ACTION-IF-FAIL for any other exit status. +-AC_DEFUN([GLIB_RUN_PROG], +-[cat >conftest.foo <<_ACEOF +-$2 +-_ACEOF +-if AC_RUN_LOG([$1 conftest.foo]); then +- m4_ifval([$3], [$3], [:]) +-m4_ifvaln([$4], [else $4])dnl +-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD +-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD +-fi]) ++# AM_PROG_MKDIR_P ++# --------------- ++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. ++# ++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories ++# created by `make install' are always world readable, even if the ++# installer happens to have an overly restrictive umask (e.g. 077). ++# This was a mistake. There are at least two reasons why we must not ++# use `-m 0755': ++# - it causes special bits like SGID to be ignored, ++# - it may be too restrictive (some setups expect 775 directories). ++# ++# Do not use -m 0755 and let people choose whatever they expect by ++# setting umask. ++# ++# We cannot accept any implementation of `mkdir' that recognizes `-p'. ++# Some implementations (such as Solaris 8's) are not thread-safe: if a ++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' ++# concurrently, both version can detect that a/ is missing, but only ++# one can create it and the other will error out. Consequently we ++# restrict ourselves to GNU make (using the --version option ensures ++# this.) ++AC_DEFUN([AM_PROG_MKDIR_P], ++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++AC_SUBST([mkdir_p])]) + ++# Helper functions for option handling. -*- Autoconf -*- + ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) +-# serial 40 IT_PROG_INTLTOOL +-AC_DEFUN([IT_PROG_INTLTOOL], [ +-AC_PREREQ([2.50])dnl +-AC_REQUIRE([AM_NLS])dnl ++# serial 3 + +-case "$am__api_version" in +- 1.[01234]) +- AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) +- ;; +- *) +- ;; +-esac ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +-if test -n "$1"; then +- AC_MSG_CHECKING([for intltool >= $1]) ++# _AM_SET_OPTION(NAME) ++# ------------------------------ ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +- INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +- INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` +- [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +- ] +- AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) +- test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || +- AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) +-fi ++# _AM_SET_OPTIONS(OPTIONS) ++# ---------------------------------- ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +-AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) +-AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) +-AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) +-if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then +- AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) +-fi ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +- INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +-INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' +- INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +-INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' +- INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-_IT_SUBST(INTLTOOL_DESKTOP_RULE) +-_IT_SUBST(INTLTOOL_DIRECTORY_RULE) +-_IT_SUBST(INTLTOOL_KEYS_RULE) +-_IT_SUBST(INTLTOOL_PROP_RULE) +-_IT_SUBST(INTLTOOL_OAF_RULE) +-_IT_SUBST(INTLTOOL_PONG_RULE) +-_IT_SUBST(INTLTOOL_SERVER_RULE) +-_IT_SUBST(INTLTOOL_SHEET_RULE) +-_IT_SUBST(INTLTOOL_SOUNDLIST_RULE) +-_IT_SUBST(INTLTOOL_UI_RULE) +-_IT_SUBST(INTLTOOL_XAM_RULE) +-_IT_SUBST(INTLTOOL_KBD_RULE) +-_IT_SUBST(INTLTOOL_XML_RULE) +-_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) +-_IT_SUBST(INTLTOOL_CAVES_RULE) +-_IT_SUBST(INTLTOOL_SCHEMAS_RULE) +-_IT_SUBST(INTLTOOL_THEME_RULE) +-_IT_SUBST(INTLTOOL_SERVICE_RULE) +-_IT_SUBST(INTLTOOL_POLICY_RULE) ++# AM_RUN_LOG(COMMAND) ++# ------------------- ++# Run COMMAND, save the exit status in ac_status, and log it. ++# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) ++AC_DEFUN([AM_RUN_LOG], ++[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD ++ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD ++ (exit $ac_status); }]) ++ ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# Check the gettext tools to make sure they are GNU +-AC_PATH_PROG(XGETTEXT, xgettext) +-AC_PATH_PROG(MSGMERGE, msgmerge) +-AC_PATH_PROG(MSGFMT, msgfmt) +-AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +-if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then +- AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) +-fi +-xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" +-mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" +-mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" +-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then +- AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) +-fi ++# serial 4 + +-AC_PATH_PROG(INTLTOOL_PERL, perl) +-if test -z "$INTLTOOL_PERL"; then +- AC_MSG_ERROR([perl not found]) +-fi +-AC_MSG_CHECKING([for perl >= 5.8.1]) +-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 +-if test $? -ne 0; then +- AC_MSG_ERROR([perl 5.8.1 is required for intltool]) +-else +- IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" +- AC_MSG_RESULT([$IT_PERL_VERSION]) +-fi +-if test "x$2" != "xno-xml"; then +- AC_MSG_CHECKING([for XML::Parser]) +- if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then +- AC_MSG_RESULT([ok]) +- else +- AC_MSG_ERROR([XML::Parser perl module is required for intltool]) ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` + fi +-fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then + +-# Substitute ALL_LINGUAS so we can use it in po/Makefile +-AC_SUBST(ALL_LINGUAS) ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi + +-# Set DATADIRNAME correctly if it is not set yet +-# (copied from glib-gettext.m4) +-if test -z "$DATADIRNAME"; then +- AC_LINK_IFELSE( +- [AC_LANG_PROGRAM([[]], +- [[extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr]])], +- [DATADIRNAME=share], +- [case $host in +- *-*-solaris*) +- dnl On Solaris, if bind_textdomain_codeset is in libc, +- dnl GNU format message catalog is always supported, +- dnl since both are added to the libc all together. +- dnl Hence, we'd like to go with DATADIRNAME=share +- dnl in this case. +- AC_CHECK_FUNC(bind_textdomain_codeset, +- [DATADIRNAME=share], [DATADIRNAME=lib]) +- ;; +- *) +- [DATADIRNAME=lib] +- ;; +- esac]) ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) + fi +-AC_SUBST(DATADIRNAME) ++AC_MSG_RESULT(yes)]) + +-IT_PO_SUBDIR([po]) ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-]) ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor `install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in `make install-strip', and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) + ++# Check how to create a tarball. -*- Autoconf -*- + +-# IT_PO_SUBDIR(DIRNAME) +-# --------------------- +-# All po subdirs have to be declared with this macro; the subdir "po" is +-# declared by IT_PROG_INTLTOOL. ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. + # +-AC_DEFUN([IT_PO_SUBDIR], +-[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. +-dnl +-dnl The following CONFIG_COMMANDS should be exetuted at the very end +-dnl of config.status. +-AC_CONFIG_COMMANDS_PRE([ +- AC_CONFIG_COMMANDS([$1/stamp-it], [ +- if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then +- AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) +- fi +- rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" +- >"$1/stamp-it.tmp" +- [sed '/^#/d +- s/^[[].*] *// +- /^[ ]*$/d +- '"s|^| $ac_top_srcdir/|" \ +- "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" +- ] +- [sed '/^POTFILES =/,/[^\\]$/ { +- /^POTFILES =/!d +- r $1/POTFILES +- } +- ' "$1/Makefile.in" >"$1/Makefile"] +- rm -f "$1/Makefile.tmp" +- mv "$1/stamp-it.tmp" "$1/stamp-it" +- ]) +-])dnl +-]) ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# _IT_SUBST(VARIABLE) +-# ------------------- +-# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST ++# serial 2 ++ ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. + # +-AC_DEFUN([_IT_SUBST], +-[ +-AC_SUBST([$1]) +-m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) +-] +-) ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac + +-# deprecated macros +-AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) +-# A hint is needed for aclocal from Automake <= 1.9.4: +-# AC_DEFUN([AC_PROG_INTLTOOL], ...) ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir + ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR + + m4_include([acinclude.m4]) +diff -urN gnome-settings-daemon-2.28.2//compile gnome-settings-daemon-2.28.2.new//compile +--- gnome-settings-daemon-2.28.2//compile 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//compile 2010-04-21 19:02:52.118358558 -0700 +@@ -1,10 +1,9 @@ + #! /bin/sh + # Wrapper for compilers which do not understand `-c -o'. + +-scriptversion=2009-10-06.20; # UTC ++scriptversion=2005-05-14.22 + +-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009 Free Software +-# Foundation, Inc. ++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + # Written by Tom Tromey . + # + # This program is free software; you can redistribute it and/or modify +@@ -18,7 +17,8 @@ + # GNU General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program. If not, see . ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -103,13 +103,13 @@ + fi + + # Name of file we expect compiler to create. +-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` ++cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + + # Create the lock directory. +-# Note: use `[/\\:.-]' here to ensure that we don't use the same name ++# Note: use `[/.-]' here to ensure that we don't use the same name + # that we are using for the .o file. Also, base the name on the expected + # object file name, since that is what matters with a parallel build. +-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d ++lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d + while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break +@@ -124,9 +124,9 @@ + ret=$? + + if test -f "$cofile"; then +- test "$cofile" = "$ofile" || mv "$cofile" "$ofile" ++ mv "$cofile" "$ofile" + elif test -f "${cofile}bj"; then +- test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" ++ mv "${cofile}bj" "$ofile" + fi + + rmdir "$lockdir" +@@ -138,6 +138,5 @@ + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "scriptversion=" + # time-stamp-format: "%:y-%02m-%02d.%02H" +-# time-stamp-time-zone: "UTC" +-# time-stamp-end: "; # UTC" ++# time-stamp-end: "$" + # End: +diff -urN gnome-settings-daemon-2.28.2//config.guess gnome-settings-daemon-2.28.2.new//config.guess +--- gnome-settings-daemon-2.28.2//config.guess 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//config.guess 2010-04-21 19:02:52.350623116 -0700 +@@ -1,10 +1,10 @@ + #! /bin/sh + # Attempt to guess a canonical system name. + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 ++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 + # Free Software Foundation, Inc. + +-timestamp='2009-06-10' ++timestamp='2009-12-30' + + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by +@@ -27,16 +27,16 @@ + # the same distribution terms that you use for the rest of that program. + + +-# Originally written by Per Bothner . +-# Please send patches to . Submit a context +-# diff and a properly formatted ChangeLog entry. ++# Originally written by Per Bothner. Please send patches (context ++# diff format) to and include a ChangeLog ++# entry. + # + # This script attempts to guess a canonical system name similar to + # config.sub. If it succeeds, it prints the system name on stdout, and + # exits with 0. Otherwise, it exits with 1. + # +-# The plan is that this can be called by configure scripts if you +-# don't specify an explicit build system type. ++# You can get the latest version of this script from: ++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + + me=`echo "$0" | sed -e 's,.*/,,'` + +@@ -56,8 +56,9 @@ + GNU config.guess ($timestamp) + + Originally written by Per Bothner. +-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, ++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free ++Software Foundation, Inc. + + This is free software; see the source for copying conditions. There is NO + warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +@@ -333,6 +334,9 @@ + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; ++ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) ++ echo i386-pc-auroraux${UNAME_RELEASE} ++ exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" +@@ -807,12 +811,12 @@ + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; +- *:Interix*:[3456]*) ++ *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; +- EM64T | authenticamd | genuineintel) ++ authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) +@@ -854,6 +858,20 @@ + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; ++ alpha:Linux:*:*) ++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in ++ EV5) UNAME_MACHINE=alphaev5 ;; ++ EV56) UNAME_MACHINE=alphaev56 ;; ++ PCA56) UNAME_MACHINE=alphapca56 ;; ++ PCA57) UNAME_MACHINE=alphapca56 ;; ++ EV6) UNAME_MACHINE=alphaev6 ;; ++ EV67) UNAME_MACHINE=alphaev67 ;; ++ EV68*) UNAME_MACHINE=alphaev68 ;; ++ esac ++ objdump --private-headers /bin/sh | grep -q ld.so.1 ++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi ++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ++ exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ +@@ -876,6 +894,17 @@ + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; ++ i*86:Linux:*:*) ++ LIBC=gnu ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #ifdef __dietlibc__ ++ LIBC=dietlibc ++ #endif ++EOF ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` ++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ++ exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; +@@ -901,39 +930,18 @@ + #endif + #endif + EOF +- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' +- /^CPU/{ +- s: ::g +- p +- }'`" ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; +- ppc:Linux:*:*) +- echo powerpc-unknown-linux-gnu +- exit ;; +- ppc64:Linux:*:*) +- echo powerpc64-unknown-linux-gnu +- exit ;; +- alpha:Linux:*:*) +- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in +- EV5) UNAME_MACHINE=alphaev5 ;; +- EV56) UNAME_MACHINE=alphaev56 ;; +- PCA56) UNAME_MACHINE=alphapca56 ;; +- PCA57) UNAME_MACHINE=alphapca56 ;; +- EV6) UNAME_MACHINE=alphaev6 ;; +- EV67) UNAME_MACHINE=alphaev67 ;; +- EV68*) UNAME_MACHINE=alphaev68 ;; +- esac +- objdump --private-headers /bin/sh | grep -q ld.so.1 +- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi +- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} +- exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; ++ parisc64:Linux:*:* | hppa64:Linux:*:*) ++ echo hppa64-unknown-linux-gnu ++ exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in +@@ -942,8 +950,11 @@ + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; +- parisc64:Linux:*:* | hppa64:Linux:*:*) +- echo hppa64-unknown-linux-gnu ++ ppc64:Linux:*:*) ++ echo powerpc64-unknown-linux-gnu ++ exit ;; ++ ppc:Linux:*:*) ++ echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux +@@ -966,58 +977,6 @@ + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; +- i*86:Linux:*:*) +- # The BFD linker knows what the default object file format is, so +- # first see if it will tell us. cd to the root directory to prevent +- # problems with other programs or directories called `ld' in the path. +- # Set LC_ALL=C to ensure ld outputs messages in English. +- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ +- | sed -ne '/supported targets:/!d +- s/[ ][ ]*/ /g +- s/.*supported targets: *// +- s/ .*// +- p'` +- case "$ld_supported_targets" in +- elf32-i386) +- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" +- ;; +- esac +- # Determine whether the default compiler is a.out or elf +- eval $set_cc_for_build +- sed 's/^ //' << EOF >$dummy.c +- #include +- #ifdef __ELF__ +- # ifdef __GLIBC__ +- # if __GLIBC__ >= 2 +- LIBC=gnu +- # else +- LIBC=gnulibc1 +- # endif +- # else +- LIBC=gnulibc1 +- # endif +- #else +- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) +- LIBC=gnu +- #else +- LIBC=gnuaout +- #endif +- #endif +- #ifdef __dietlibc__ +- LIBC=dietlibc +- #endif +-EOF +- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' +- /^LIBC/{ +- s: ::g +- p +- }'`" +- test x"${LIBC}" != x && { +- echo "${UNAME_MACHINE}-pc-linux-${LIBC}" +- exit +- } +- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } +- ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both +@@ -1247,6 +1206,16 @@ + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in ++ i386) ++ eval $set_cc_for_build ++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then ++ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ ++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ ++ grep IS_64BIT_ARCH >/dev/null ++ then ++ UNAME_PROCESSOR="x86_64" ++ fi ++ fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} +diff -urN gnome-settings-daemon-2.28.2//config.h.in gnome-settings-daemon-2.28.2.new//config.h.in +--- gnome-settings-daemon-2.28.2//config.h.in 2010-03-10 03:49:27.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//config.h.in 2010-04-21 19:02:52.000000000 -0700 +@@ -24,6 +24,9 @@ + /* Define if the GNU gettext() function is already present or preinstalled. */ + #undef HAVE_GETTEXT + ++/* enable gstreamer */ ++#undef HAVE_GSTREAMER ++ + /* Define to 1 if you have the header file. */ + #undef HAVE_INTTYPES_H + +diff -urN gnome-settings-daemon-2.28.2//config.sub gnome-settings-daemon-2.28.2.new//config.sub +--- gnome-settings-daemon-2.28.2//config.sub 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//config.sub 2010-04-21 19:02:52.353608203 -0700 +@@ -1,10 +1,10 @@ + #! /bin/sh + # Configuration validation subroutine script. + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 ++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 + # Free Software Foundation, Inc. + +-timestamp='2009-06-11' ++timestamp='2010-01-22' + + # This file is (in principle) common to ALL GNU software. + # The presence of a machine in this file suggests that SOME GNU software +@@ -32,13 +32,16 @@ + + + # Please send patches to . Submit a context +-# diff and a properly formatted ChangeLog entry. ++# diff and a properly formatted GNU ChangeLog entry. + # + # Configuration subroutine to validate and canonicalize a configuration type. + # Supply the specified configuration type as an argument. + # If it is invalid, we print an error message on stderr and exit with code 1. + # Otherwise, we print the canonical config type on stdout and succeed. + ++# You can get the latest version of this script from: ++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD ++ + # This file is supposed to be the same for all GNU packages + # and recognize all the CPU types, system types and aliases + # that are meaningful with *any* GNU software. +@@ -72,8 +75,9 @@ + version="\ + GNU config.sub ($timestamp) + +-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, ++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free ++Software Foundation, Inc. + + This is free software; see the source for copying conditions. There is NO + warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +@@ -149,7 +153,7 @@ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ +- -apple | -axis | -knuth | -cray) ++ -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; +@@ -284,6 +288,7 @@ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ ++ | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ +@@ -291,13 +296,14 @@ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ ++ | ubicom32 \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; +- m6811 | m68hc11 | m6812 | m68hc12) ++ m6811 | m68hc11 | m6812 | m68hc12 | picochip) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none +@@ -340,7 +346,7 @@ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ +- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ ++ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ +@@ -368,15 +374,17 @@ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ +- | romp-* | rs6000-* \ ++ | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ +- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ ++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ ++ | tile-* | tilegx-* \ + | tron-* \ ++ | ubicom32-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ +@@ -726,6 +734,9 @@ + basic_machine=ns32k-utek + os=-sysv + ;; ++ microblaze) ++ basic_machine=microblaze-xilinx ++ ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 +@@ -1076,6 +1087,11 @@ + basic_machine=tic6x-unknown + os=-coff + ;; ++ # This must be matched before tile*. ++ tilegx*) ++ basic_machine=tilegx-unknown ++ os=-linux-gnu ++ ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu +@@ -1247,6 +1263,9 @@ + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. ++ -auroraux) ++ os=-auroraux ++ ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; +@@ -1268,8 +1287,8 @@ + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ +- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ +- | -kopensolaris* \ ++ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ ++ | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ +@@ -1290,7 +1309,7 @@ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ +- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) ++ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) +@@ -1423,6 +1442,8 @@ + -dicos*) + os=-dicos + ;; ++ -nacl*) ++ ;; + -none) + ;; + *) +diff -urN gnome-settings-daemon-2.28.2//configure gnome-settings-daemon-2.28.2.new//configure +--- gnome-settings-daemon-2.28.2//configure 2010-03-10 03:49:27.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//configure 2010-04-21 19:02:53.469607556 -0700 +@@ -744,12 +744,14 @@ + # include + #endif" + +-ac_subst_vars='am__EXEEXT_FALSE +-am__EXEEXT_TRUE +-LTLIBOBJS ++ac_subst_vars='LTLIBOBJS + LIBOBJS + DEBUG_CFLAGS + plugindir ++HAVE_GSTREAMER_FALSE ++HAVE_GSTREAMER_TRUE ++GST_LIBS ++GST_CFLAGS + HAVE_PULSE_FALSE + HAVE_PULSE_TRUE + PULSE_LIBS +@@ -884,6 +886,9 @@ + LDFLAGS + CFLAGS + CC ++MAINT ++MAINTAINER_MODE_FALSE ++MAINTAINER_MODE_TRUE + am__untar + am__tar + AMTAR +@@ -891,7 +896,6 @@ + SET_MAKE + AWK + mkdir_p +-MKDIR_P + INSTALL_STRIP_PROGRAM + STRIP + install_sh +@@ -903,7 +907,6 @@ + VERSION + PACKAGE + CYGPATH_W +-am__isrc + INSTALL_DATA + INSTALL_SCRIPT + INSTALL_PROGRAM +@@ -948,6 +951,7 @@ + ac_subst_files='' + ac_user_opts=' + enable_option_checking ++enable_maintainer_mode + enable_dependency_tracking + enable_shared + enable_static +@@ -966,6 +970,7 @@ + with_dbus_services + with_x + enable_pulse ++enable_gstreamer + enable_profiling + enable_more_warnings + enable_debug +@@ -998,7 +1003,9 @@ + GIOUNIX_CFLAGS + GIOUNIX_LIBS + PULSE_CFLAGS +-PULSE_LIBS' ++PULSE_LIBS ++GST_CFLAGS ++GST_LIBS' + + + # Initialize some variables set by options. +@@ -1623,6 +1630,8 @@ + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] ++ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-shared[=PKGS] build shared libraries [default=yes] +@@ -1637,6 +1646,8 @@ + --disable-schemas-install + Disable the schemas installation + --disable-pulse turn off PulseAudio support ++ --enable-gstreamer use gstreamer if available (and optionally specify a ++ version) + --enable-profiling turn on profiling + --enable-more-warnings Maximum compiler warnings + --enable-debug turn on debugging +@@ -1698,6 +1709,8 @@ + PULSE_CFLAGS + C compiler flags for PULSE, overriding pkg-config + PULSE_LIBS linker flags for PULSE, overriding pkg-config ++ GST_CFLAGS C compiler flags for GST, overriding pkg-config ++ GST_LIBS linker flags for GST, overriding pkg-config + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. +@@ -2661,8 +2674,7 @@ + + + +-am__api_version='1.11' +- ++am__api_version="1.9" + ac_aux_dir= + for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + for ac_t in install-sh install.sh shtool; do +@@ -2784,29 +2796,16 @@ + # Just in case + sleep 1 + echo timestamp > conftest.file +-# Reject unsafe characters in $srcdir or the absolute working directory +-# name. Accept space and tab only in the latter. +-am_lf=' +-' +-case `pwd` in +- *[\\\"\#\$\&\'\`$am_lf]*) +- as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; +-esac +-case $srcdir in +- *[\\\"\#\$\&\'\`$am_lf\ \ ]*) +- as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +-esac +- + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. +- set X `ls -t "$srcdir/configure" conftest.file` ++ set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ +@@ -2844,14 +2843,7 @@ + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` + +-if test x"${MISSING+set}" != xset; then +- case $am_aux_dir in +- *\ * | *\ *) +- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; +- *) +- MISSING="\${SHELL} $am_aux_dir/missing" ;; +- esac +-fi ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" + # Use eval to expand $SHELL + if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +@@ -2861,162 +2853,38 @@ + $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + +-if test x"${install_sh}" != xset; then +- case $am_aux_dir in +- *\ * | *\ *) +- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; +- *) +- install_sh="\${SHELL} $am_aux_dir/install-sh" +- esac +-fi +- +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-if test "$cross_compiling" != no; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_STRIP+set}" = set; then : +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +- done +-IFS=$as_save_IFS +- +-fi +-fi +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +-$as_echo "$STRIP" >&6; } +-else +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- +-fi +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +- done +-IFS=$as_save_IFS +- +-fi +-fi +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +-$as_echo "$ac_ct_STRIP" >&6; } +-else +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- if test "x$ac_ct_STRIP" = x; then +- STRIP=":" +- else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +-ac_tool_warned=yes ;; +-esac +- STRIP=$ac_ct_STRIP +- fi +-else +- STRIP="$ac_cv_prog_STRIP" +-fi +- +-fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +- +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +-if test -z "$MKDIR_P"; then +- if test "${ac_cv_path_mkdir+set}" = set; then : +- $as_echo_n "(cached) " >&6 +-else +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_prog in mkdir gmkdir; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue +- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( +- 'mkdir (GNU coreutils) '* | \ +- 'mkdir (coreutils) '* | \ +- 'mkdir (fileutils) '4.1*) +- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext +- break 3;; +- esac +- done +- done ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d + done +-IFS=$as_save_IFS +- +-fi +- +- test -d ./--version && rmdir ./--version +- if test "${ac_cv_path_mkdir+set}" = set; then +- MKDIR_P="$ac_cv_path_mkdir -p" ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' + else +- # As a last resort, use the slow shell script. Don't cache a +- # value for MKDIR_P within a source directory, because that will +- # break other packages using the cache if that directory is +- # removed, or if the value is a relative name. +- MKDIR_P="$ac_install_sh -d" ++ mkdir_p='$(install_sh) -d' + fi + fi +-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +-$as_echo "$MKDIR_P" >&6; } +- +-mkdir_p="$MKDIR_P" +-case $mkdir_p in +- [\\/$]* | ?:[\\/]*) ;; +- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +-esac + + for ac_prog in gawk mawk nawk awk + do +@@ -3100,14 +2968,10 @@ + fi + rmdir .tst 2>/dev/null + +-if test "`cd $srcdir && pwd`" != "`pwd`"; then +- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output +- # is not polluted with repeated "-I." +- am__isrc=' -I$(srcdir)' +- # test to see if srcdir already configured +- if test -f $srcdir/config.status; then +- as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 +- fi ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi + + # test whether we have cygpath +@@ -3150,6 +3014,108 @@ + + MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 ++$as_echo "$STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 ++$as_echo_n "checking for $ac_word... " >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : ++ $as_echo_n "(cached) " >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++ done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 ++$as_echo "$ac_ct_STRIP" >&6; } ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 ++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++ + # We need awk for the "check" target. The system "awk" is bad on + # some platforms. + # Always define AMTAR for backward compatibility. +@@ -3243,6 +3209,30 @@ + + + ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } ++ # Check whether --enable-maintainer-mode was given. ++if test "${enable_maintainer_mode+set}" = set; then : ++ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval ++else ++ USE_MAINTAINER_MODE=no ++fi ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 ++$as_echo "$USE_MAINTAINER_MODE" >&6; } ++ ++ ++if test $USE_MAINTAINER_MODE = yes; then ++ MAINTAINER_MODE_TRUE= ++ MAINTAINER_MODE_FALSE='#' ++else ++ MAINTAINER_MODE_TRUE='#' ++ MAINTAINER_MODE_FALSE= ++fi ++ ++ MAINT=$MAINTAINER_MODE_TRUE ++ ++ + + DEPDIR="${am__leading_dot}deps" + +@@ -3252,7 +3242,7 @@ + am_make=${MAKE-make} + cat > confinc << 'END' + am__doit: +- @echo this is the am__doit target ++ @echo done + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +@@ -3263,24 +3253,24 @@ + _am_result=none + # First try GNU make style include. + echo "include confinc" > confmf +-# Ignore all kinds of additional output from `make'. +-case `$am_make -s -f confmf 2> /dev/null` in #( +-*the\ am__doit\ target*) +- am__include=include +- am__quote= +- _am_result=GNU +- ;; +-esac ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi + # Now try BSD make style include. + if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf +- case `$am_make -s -f confmf 2> /dev/null` in #( +- *the\ am__doit\ target*) +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- ;; +- esac ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi + fi + + +@@ -3297,7 +3287,9 @@ + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + fi +- if test "x$enable_dependency_tracking" != xno; then ++ ++ ++if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' + else +@@ -3306,6 +3298,7 @@ + fi + + ++ + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -4127,11 +4120,6 @@ + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi +- am__universal=false +- case " $depcc " in #( +- *\ -arch\ *\ -arch\ *) am__universal=true ;; +- esac +- + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -4149,17 +4137,7 @@ + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. Also, some Intel +- # versions had trouble with output in subdirs +- am__obj=sub/conftest.${OBJEXT-o} +- am__minus_obj="-o $am__obj" + case $depmode in +- gcc) +- # This depmode causes a compiler race in universal mode. +- test "$am__universal" = false || continue +- ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -4169,23 +4147,18 @@ + break + fi + ;; +- msvisualcpp | msvcmsys) +- # This compiler won't grok `-c -o', but also, the minuso test has +- # not run yet. These depmodes are late enough in the game, and +- # so weak that their functioning should not be impacted. +- am__obj=conftest.${OBJEXT-o} +- am__minus_obj= +- ;; + none) break ;; + esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=$am__obj \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -4213,7 +4186,9 @@ + $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + +- if ++ ++ ++if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= +@@ -4892,11 +4867,6 @@ + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi +- am__universal=false +- case " $depcc " in #( +- *\ -arch\ *\ -arch\ *) am__universal=true ;; +- esac +- + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -4914,17 +4884,7 @@ + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. Also, some Intel +- # versions had trouble with output in subdirs +- am__obj=sub/conftest.${OBJEXT-o} +- am__minus_obj="-o $am__obj" + case $depmode in +- gcc) +- # This depmode causes a compiler race in universal mode. +- test "$am__universal" = false || continue +- ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -4934,23 +4894,18 @@ + break + fi + ;; +- msvisualcpp | msvcmsys) +- # This compiler won't grok `-c -o', but also, the minuso test has +- # not run yet. These depmodes are late enough in the game, and +- # so weak that their functioning should not be impacted. +- am__obj=conftest.${OBJEXT-o} +- am__minus_obj= +- ;; + none) break ;; + esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=$am__obj \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -4978,7 +4933,9 @@ + $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +- if ++ ++ ++if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= +@@ -5103,9 +5060,8 @@ + # FIXME: we rely on the cache variable name because + # there is no other way. + set dummy $CC +-am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +-if test "$am_t" != yes; then ++ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` ++if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. +@@ -5114,7 +5070,6 @@ + CC="$am_aux_dir/compile $CC" + fi + +- + case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +@@ -5665,13 +5620,13 @@ + else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext +- (eval echo "\"\$as_me:5668: $ac_compile\"" >&5) ++ (eval echo "\"\$as_me:5623: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 +- (eval echo "\"\$as_me:5671: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval echo "\"\$as_me:5626: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 +- (eval echo "\"\$as_me:5674: output\"" >&5) ++ (eval echo "\"\$as_me:5629: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" +@@ -6876,7 +6831,7 @@ + ;; + *-*-irix6*) + # Find out which ABI we are using. +- echo '#line 6879 "configure"' > conftest.$ac_ext ++ echo '#line 6834 "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +@@ -7943,11 +7898,6 @@ + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi +- am__universal=false +- case " $depcc " in #( +- *\ -arch\ *\ -arch\ *) am__universal=true ;; +- esac +- + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and +@@ -7965,17 +7915,7 @@ + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. Also, some Intel +- # versions had trouble with output in subdirs +- am__obj=sub/conftest.${OBJEXT-o} +- am__minus_obj="-o $am__obj" + case $depmode in +- gcc) +- # This depmode causes a compiler race in universal mode. +- test "$am__universal" = false || continue +- ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested +@@ -7985,23 +7925,18 @@ + break + fi + ;; +- msvisualcpp | msvcmsys) +- # This compiler won't grok `-c -o', but also, the minuso test has +- # not run yet. These depmodes are late enough in the game, and +- # so weak that their functioning should not be impacted. +- am__obj=conftest.${OBJEXT-o} +- am__minus_obj= +- ;; + none) break ;; + esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. + if depmode=$depmode \ +- source=sub/conftest.c object=$am__obj \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message +@@ -8029,7 +7964,9 @@ + $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } + CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +- if ++ ++ ++if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= +@@ -8679,11 +8616,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:8682: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8619: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:8686: \$? = $ac_status" >&5 ++ echo "$as_me:8623: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -9018,11 +8955,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9021: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:8958: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:9025: \$? = $ac_status" >&5 ++ echo "$as_me:8962: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -9123,11 +9060,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9126: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9063: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:9130: \$? = $ac_status" >&5 ++ echo "$as_me:9067: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -9178,11 +9115,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9181: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:9118: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:9185: \$? = $ac_status" >&5 ++ echo "$as_me:9122: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -11562,7 +11499,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 11565 "configure" ++#line 11502 "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -11658,7 +11595,7 @@ + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +-#line 11661 "configure" ++#line 11598 "configure" + #include "confdefs.h" + + #if HAVE_DLFCN_H +@@ -13614,11 +13551,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13617: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13554: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 +- echo "$as_me:13621: \$? = $ac_status" >&5 ++ echo "$as_me:13558: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +@@ -13713,11 +13650,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13716: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13653: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:13720: \$? = $ac_status" >&5 ++ echo "$as_me:13657: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -13765,11 +13702,11 @@ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:13768: $lt_compile\"" >&5) ++ (eval echo "\"\$as_me:13705: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 +- echo "$as_me:13772: \$? = $ac_status" >&5 ++ echo "$as_me:13709: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized +@@ -16541,12 +16478,16 @@ + gnome-desktop-2.0 >= \$GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= \$GIO_REQUIRED_VERSION + dbus-glib-1 >= \$DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + \""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED_VERSION + gconf-2.0 >= $GCONF_REQUIRED_VERSION + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + ") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 +@@ -16556,6 +16497,8 @@ + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + " 2>/dev/null` + else + pkg_failed=yes +@@ -16574,12 +16517,16 @@ + gnome-desktop-2.0 >= \$GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= \$GIO_REQUIRED_VERSION + dbus-glib-1 >= \$DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + \""; } >&5 + ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED_VERSION + gconf-2.0 >= $GCONF_REQUIRED_VERSION + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + ") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 +@@ -16589,6 +16536,8 @@ + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + " 2>/dev/null` + else + pkg_failed=yes +@@ -16613,6 +16562,8 @@ + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + "` + else + SETTINGS_PLUGIN_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED_VERSION +@@ -16620,6 +16571,8 @@ + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + "` + fi + # Put the nasty error message in config.log where it belongs +@@ -16630,6 +16583,8 @@ + gnome-desktop-2.0 >= $GNOME_DESKTOP_REQUIRED_VERSION + gio-2.0 >= $GIO_REQUIRED_VERSION + dbus-glib-1 >= $DBUS_GLIB_REQUIRED_VERSION ++ xext ++ x11 + ) were not met: + + $SETTINGS_PLUGIN_PKG_ERRORS +@@ -16793,7 +16748,9 @@ + esac + fi + +- if test "$enable_schemas_install" != no; then ++ ++ ++if test "$enable_schemas_install" != no; then + GCONF_SCHEMAS_INSTALL_TRUE= + GCONF_SCHEMAS_INSTALL_FALSE='#' + else +@@ -17707,7 +17664,9 @@ + # LIBS="$ac_save_LIBS" + + +- if test $have_xinput = yes; then ++ ++ ++if test $have_xinput = yes; then + HAVE_XINPUT_TRUE= + HAVE_XINPUT_FALSE='#' + else +@@ -17882,7 +17841,9 @@ + + have_fontconfig=yes + fi +- if test x"$have_fontconfig" = "xyes"; then ++ ++ ++if test x"$have_fontconfig" = "xyes"; then + HAVE_FONTCONFIG_TRUE= + HAVE_FONTCONFIG_FALSE='#' + else +@@ -18008,12 +17969,12 @@ + pkg_cv_LIBGNOMEKBD_CFLAGS="$LIBGNOMEKBD_CFLAGS" + else + if test -n "$PKG_CONFIG" && \ +- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4 libxklavier >= 4.0\""; } >&5 +- ($PKG_CONFIG --exists --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 4.0") 2>&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4 libxklavier >= 5.0\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 5.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then +- pkg_cv_LIBGNOMEKBD_CFLAGS=`$PKG_CONFIG --cflags "libgnomekbd >= 2.21.4 libxklavier >= 4.0" 2>/dev/null` ++ pkg_cv_LIBGNOMEKBD_CFLAGS=`$PKG_CONFIG --cflags "libgnomekbd >= 2.21.4 libxklavier >= 5.0" 2>/dev/null` + else + pkg_failed=yes + fi +@@ -18026,12 +17987,12 @@ + pkg_cv_LIBGNOMEKBD_LIBS="$LIBGNOMEKBD_LIBS" + else + if test -n "$PKG_CONFIG" && \ +- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4 libxklavier >= 4.0\""; } >&5 +- ($PKG_CONFIG --exists --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 4.0") 2>&5 ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libgnomekbd >= 2.21.4 libxklavier >= 5.0\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 5.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then +- pkg_cv_LIBGNOMEKBD_LIBS=`$PKG_CONFIG --libs "libgnomekbd >= 2.21.4 libxklavier >= 4.0" 2>/dev/null` ++ pkg_cv_LIBGNOMEKBD_LIBS=`$PKG_CONFIG --libs "libgnomekbd >= 2.21.4 libxklavier >= 5.0" 2>/dev/null` + else + pkg_failed=yes + fi +@@ -18050,14 +18011,14 @@ + _pkg_short_errors_supported=no + fi + if test $_pkg_short_errors_supported = yes; then +- LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 4.0"` ++ LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 5.0"` + else +- LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 4.0"` ++ LIBGNOMEKBD_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libgnomekbd >= 2.21.4 libxklavier >= 5.0"` + fi + # Put the nasty error message in config.log where it belongs + echo "$LIBGNOMEKBD_PKG_ERRORS" >&5 + +- as_fn_error "Package requirements (libgnomekbd >= 2.21.4 libxklavier >= 4.0) were not met: ++ as_fn_error "Package requirements (libgnomekbd >= 2.21.4 libxklavier >= 5.0) were not met: + + $LIBGNOMEKBD_PKG_ERRORS + +@@ -18276,7 +18237,9 @@ + + fi + fi +- if test "x$have_pulse" = "xtrue"; then ++ ++ ++if test "x$have_pulse" = "xtrue"; then + HAVE_PULSE_TRUE= + HAVE_PULSE_FALSE='#' + else +@@ -18288,6 +18251,130 @@ + + + ++GST_MAJORMINOR=auto ++ ++# Check whether --enable-gstreamer was given. ++if test "${enable_gstreamer+set}" = set; then : ++ enableval=$enable_gstreamer; case "${enableval}" in ++ yes) ENABLE_GSTREAMER=yes ;; ++ 0.10) ENABLE_GSTREAMER=yes && GST_MAJORMINOR=0.10 ;; ++ no) ENABLE_GSTREAMER=no ;; ++ *) as_fn_error " ++ *** Bad value ${enableval} for --enable-gstreamer ++ *** Please use one of the following: ++ *** --enable-gstreamer=0.10 ++ " "$LINENO" 5 ;; ++esac ++else ++ ENABLE_GSTREAMER=yes ++fi ++ ++have_gstreamer=no ++if test "x$ENABLE_GSTREAMER" = "xyes"; then ++ GST_REQS=0.10.1.2 ++ PKGS="gstreamer-0.10 >= $GST_REQS gstreamer-plugins-base-0.10 >= $GST_REQS" ++ ++ ++pkg_failed=no ++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GST" >&5 ++$as_echo_n "checking for GST... " >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GST_CFLAGS"; then ++ pkg_cv_GST_CFLAGS="$GST_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$PKGS\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "$PKGS") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_GST_CFLAGS=`$PKG_CONFIG --cflags "$PKGS" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GST_LIBS"; then ++ pkg_cv_GST_LIBS="$GST_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$PKGS\""; } >&5 ++ ($PKG_CONFIG --exists --print-errors "$PKGS") 2>&5 ++ ac_status=$? ++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 ++ test $ac_status = 0; }; then ++ pkg_cv_GST_LIBS=`$PKG_CONFIG --libs "$PKGS" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GST_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$PKGS"` ++ else ++ GST_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$PKGS"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GST_PKG_ERRORS" >&5 ++ ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++elif test $pkg_failed = untried; then ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 ++$as_echo "no" >&6; } ++else ++ GST_CFLAGS=$pkg_cv_GST_CFLAGS ++ GST_LIBS=$pkg_cv_GST_LIBS ++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 ++$as_echo "yes" >&6; } ++ have_gstreamer=yes ++fi ++ ++ if test "x$have_pulse" = "xtrue"; then ++ as_fn_error "*** GStreamer & Pulseaudio both are selected ***" "$LINENO" 5 ++ fi ++ ++ if test "x$have_gstreamer" = "xyes"; then ++ GST_LIBS="$GST_LIBS -lgstinterfaces-0.10 -lgstaudio-0.10" ++ ++$as_echo "#define HAVE_GSTREAMER 1" >>confdefs.h ++ ++ fi ++else ++ { $as_echo "$as_me:${as_lineno-$LINENO}: *** GStreamer support disabled ***" >&5 ++$as_echo "$as_me: *** GStreamer support disabled ***" >&6;} ++fi ++ ++ ++if test "x$have_gstreamer" = "xyes"; then ++ HAVE_GSTREAMER_TRUE= ++ HAVE_GSTREAMER_FALSE='#' ++else ++ HAVE_GSTREAMER_TRUE='#' ++ HAVE_GSTREAMER_FALSE= ++fi ++ ++ ++ ++ + # --------------------------------------------------------------------------- + # Enable Profiling + # --------------------------------------------------------------------------- +@@ -18497,14 +18584,10 @@ + LTLIBOBJS=$ac_ltlibobjs + + +- if test -n "$EXEEXT"; then +- am__EXEEXT_TRUE= +- am__EXEEXT_FALSE='#' +-else +- am__EXEEXT_TRUE='#' +- am__EXEEXT_FALSE= ++if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then ++ as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi +- + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error "conditional \"AMDEP\" was never defined. + Usually this means the macro was only invoked conditionally." "$LINENO" 5 +@@ -18541,6 +18624,10 @@ + as_fn_error "conditional \"HAVE_PULSE\" was never defined. + Usually this means the macro was only invoked conditionally." "$LINENO" 5 + fi ++if test -z "${HAVE_GSTREAMER_TRUE}" && test -z "${HAVE_GSTREAMER_FALSE}"; then ++ as_fn_error "conditional \"HAVE_GSTREAMER\" was never defined. ++Usually this means the macro was only invoked conditionally." "$LINENO" 5 ++fi + + : ${CONFIG_STATUS=./config.status} + ac_write_fail=0 +@@ -19026,7 +19113,6 @@ + ac_pwd='$ac_pwd' + srcdir='$srcdir' + INSTALL='$INSTALL' +-MKDIR_P='$MKDIR_P' + AWK='$AWK' + test -n "\$AWK" || AWK=awk + _ACEOF +@@ -19959,11 +20045,6 @@ + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +- ac_MKDIR_P=$MKDIR_P +- case $MKDIR_P in +- [\\/$]* | ?:[\\/]* ) ;; +- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; +- esac + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +@@ -20018,7 +20099,6 @@ + s&@abs_builddir@&$ac_abs_builddir&;t t + s&@abs_top_builddir@&$ac_abs_top_builddir&;t t + s&@INSTALL@&$ac_INSTALL&;t t +-s&@MKDIR_P@&$ac_MKDIR_P&;t t + $ac_datarootdir_hack + " + eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ +@@ -20063,22 +20143,21 @@ + || as_fn_error "could not create -" "$LINENO" 5 + fi + # Compute "$ac_file"'s index in $config_headers. +-_am_arg="$ac_file" + _am_stamp_count=1 + for _am_header in $config_headers :; do + case $_am_header in +- $_am_arg | $_am_arg:* ) ++ "$ac_file" | "$ac_file":* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac + done +-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$_am_arg" : 'X\(//\)[^/]' \| \ +- X"$_am_arg" : 'X\(//\)$' \| \ +- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$_am_arg" | ++echo "timestamp for "$ac_file"" >`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -20105,28 +20184,17 @@ + + + case $ac_file$ac_mode in +- "depfiles":C) test x"$AMDEP_TRUE" != x"" || { +- # Autoconf 2.62 quotes --file arguments for eval, but not when files +- # are listed without --file. Let's play safe and only enable the eval +- # if we detect the quoting. +- case $CONFIG_FILES in +- *\'*) eval set x "$CONFIG_FILES" ;; +- *) set x $CONFIG_FILES ;; +- esac +- shift +- for mf +- do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then +- dirpart=`$as_dirname -- "$mf" || ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || + $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ +@@ -20149,28 +20217,28 @@ + q + } + s/.*/./; q'` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`$as_dirname -- "$file" || ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || + $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ +@@ -20193,12 +20261,11 @@ + q + } + s/.*/./; q'` +- as_dir=$dirpart/$fdir; as_fn_mkdir_p +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done ++ as_dir=$dirpart/$fdir; as_fn_mkdir_p ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" + done +-} ++done + ;; + "libtool":C) + +@@ -21087,6 +21154,7 @@ + dbus-1 system.d dir: ${DBUS_SYS_DIR} + + Libnotify support: ${have_libnotify} ++ GStreamer support: ${have_gstreamer} + PulseAudio support: ${have_pulse} + Profiling support: ${enable_profiling} + " +diff -urN gnome-settings-daemon-2.28.2//data/Makefile.in gnome-settings-daemon-2.28.2.new//data/Makefile.in +--- gnome-settings-daemon-2.28.2//data/Makefile.in 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//data/Makefile.in 2010-04-21 19:02:48.417358085 -0700 +@@ -1,9 +1,8 @@ +-# Makefile.in generated by automake 1.11.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +-# Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -15,12 +14,15 @@ + + @SET_MAKE@ + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkgincludedir = $(includedir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ +-pkglibexecdir = $(libexecdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -48,7 +50,6 @@ + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = gnome-settings-daemon.desktop.in \ + gnome-settings-daemon.pc gnome-settings-daemon-uninstalled.pc +-CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +@@ -56,30 +57,22 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +-am__install_max = 40 +-am__nobase_strip_setup = \ +- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +-am__nobase_strip = \ +- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +-am__nobase_list = $(am__nobase_strip_setup); \ +- for p in $$list; do echo "$$p $$p"; done | \ +- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ +- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ +- if (++n[$$2] == $(am__install_max)) \ +- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ +- END { for (dir in files) print dir, files[dir] }' +-am__base_list = \ +- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ +- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + am__installdirs = "$(DESTDIR)$(desktopdir)" \ + "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(schemasdir)" \ + "$(DESTDIR)$(servicedir)" "$(DESTDIR)$(xmldir)" ++desktopDATA_INSTALL = $(INSTALL_DATA) ++pkgconfigDATA_INSTALL = $(INSTALL_DATA) ++schemasDATA_INSTALL = $(INSTALL_DATA) ++serviceDATA_INSTALL = $(INSTALL_DATA) ++xmlDATA_INSTALL = $(INSTALL_DATA) + DATA = $(desktop_DATA) $(pkgconfig_DATA) $(schemas_DATA) \ + $(service_DATA) $(xml_DATA) + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -114,6 +107,8 @@ + FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@ + FONTCONFIG_LIBS = @FONTCONFIG_LIBS@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +@@ -126,17 +121,45 @@ + GREP = @GREP@ + GSD_INTLTOOL_PLUGIN_RULE = @GSD_INTLTOOL_PLUGIN_RULE@ + GSD_PLUGIN_LDFLAGS = @GSD_PLUGIN_LDFLAGS@ +-INSTALL = @INSTALL@ ++GST_CFLAGS = @GST_CFLAGS@ ++GST_LIBS = @GST_LIBS@ ++HAVE_FONTCONFIG_FALSE = @HAVE_FONTCONFIG_FALSE@ ++HAVE_FONTCONFIG_TRUE = @HAVE_FONTCONFIG_TRUE@ ++HAVE_GSTREAMER_FALSE = @HAVE_GSTREAMER_FALSE@ ++HAVE_GSTREAMER_TRUE = @HAVE_GSTREAMER_TRUE@ ++HAVE_PULSE_FALSE = @HAVE_PULSE_FALSE@ ++HAVE_PULSE_TRUE = @HAVE_PULSE_TRUE@ ++HAVE_XINPUT_FALSE = @HAVE_XINPUT_FALSE@ ++HAVE_XINPUT_TRUE = @HAVE_XINPUT_TRUE@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ + LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBEXECDIR = @LIBEXECDIR@ +@@ -150,8 +173,10 @@ + LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ ++MAINT = @MAINT@ ++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ ++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ +@@ -198,13 +223,13 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -216,7 +241,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -246,12 +270,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + schemasdir = $(GCONF_SCHEMA_FILE_DIR) + schemas_in_files = \ +@@ -298,18 +318,18 @@ + all: all-am + + .SUFFIXES: +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ +- && { if test -f $@; then exit 0; else break; fi; }; \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \ +- $(am__cd) $(top_srcdir) && \ +- $(AUTOMAKE) --gnu data/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu data/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -323,11 +343,10 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(am__aclocal_m4_deps): + gnome-settings-daemon.desktop.in: $(top_builddir)/config.status $(srcdir)/gnome-settings-daemon.desktop.in.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + gnome-settings-daemon.pc: $(top_builddir)/config.status $(srcdir)/gnome-settings-daemon.pc.in +@@ -340,106 +359,95 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-desktopDATA: $(desktop_DATA) + @$(NORMAL_INSTALL) +- test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)" +- @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(desktopdir)" || $(mkdir_p) "$(DESTDIR)$(desktopdir)" ++ @list='$(desktop_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(desktopDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(desktopdir)/$$f'"; \ ++ $(desktopDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(desktopdir)/$$f"; \ + done + + uninstall-desktopDATA: + @$(NORMAL_UNINSTALL) +- @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(desktopdir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(desktopdir)" && rm -f $$files ++ @list='$(desktop_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(desktopdir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(desktopdir)/$$f"; \ ++ done + install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) +- test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" +- @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" ++ @list='$(pkgconfig_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ ++ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done + + uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) +- @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files ++ @list='$(pkgconfig_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ ++ done + install-schemasDATA: $(schemas_DATA) + @$(NORMAL_INSTALL) +- test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)" +- @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(schemasdir)" || $(mkdir_p) "$(DESTDIR)$(schemasdir)" ++ @list='$(schemas_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(schemasDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(schemasdir)/$$f'"; \ ++ $(schemasDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(schemasdir)/$$f"; \ + done + + uninstall-schemasDATA: + @$(NORMAL_UNINSTALL) +- @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(schemasdir)" && rm -f $$files ++ @list='$(schemas_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(schemasdir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(schemasdir)/$$f"; \ ++ done + install-serviceDATA: $(service_DATA) + @$(NORMAL_INSTALL) +- test -z "$(servicedir)" || $(MKDIR_P) "$(DESTDIR)$(servicedir)" +- @list='$(service_DATA)'; test -n "$(servicedir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(servicedir)" || $(mkdir_p) "$(DESTDIR)$(servicedir)" ++ @list='$(service_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(servicedir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(servicedir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(serviceDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(servicedir)/$$f'"; \ ++ $(serviceDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(servicedir)/$$f"; \ + done + + uninstall-serviceDATA: + @$(NORMAL_UNINSTALL) +- @list='$(service_DATA)'; test -n "$(servicedir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(servicedir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(servicedir)" && rm -f $$files ++ @list='$(service_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(servicedir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(servicedir)/$$f"; \ ++ done + install-xmlDATA: $(xml_DATA) + @$(NORMAL_INSTALL) +- test -z "$(xmldir)" || $(MKDIR_P) "$(DESTDIR)$(xmldir)" +- @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(xmldir)" || $(mkdir_p) "$(DESTDIR)$(xmldir)" ++ @list='$(xml_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xmldir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(xmldir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(xmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(xmldir)/$$f'"; \ ++ $(xmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(xmldir)/$$f"; \ + done + + uninstall-xmlDATA: + @$(NORMAL_UNINSTALL) +- @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(xmldir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(xmldir)" && rm -f $$files ++ @list='$(xml_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(xmldir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(xmldir)/$$f"; \ ++ done + tags: TAGS + TAGS: + +@@ -448,32 +456,29 @@ + + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test -d "$(distdir)/$$file"; then \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ +- fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ +- test -f "$(distdir)/$$file" \ +- || cp -p $$d/$$file "$(distdir)/$$file" \ ++ test -f $(distdir)/$$file \ ++ || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +@@ -482,7 +487,7 @@ + all-am: Makefile $(DATA) + installdirs: + for dir in "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(servicedir)" "$(DESTDIR)$(xmldir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -504,7 +509,6 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) +- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + + maintainer-clean-generic: +@@ -517,7 +521,7 @@ + + distclean: distclean-am + -rm -f Makefile +-distclean-am: clean-am distclean-generic ++distclean-am: clean-am distclean-generic distclean-libtool + + dvi: dvi-am + +@@ -525,8 +529,6 @@ + + html: html-am + +-html-am: +- + info: info-am + + info-am: +@@ -535,30 +537,12 @@ + install-pkgconfigDATA install-schemasDATA install-serviceDATA \ + install-xmlDATA + +-install-dvi: install-dvi-am +- +-install-dvi-am: +- + install-exec-am: + +-install-html: install-html-am +- +-install-html-am: +- + install-info: install-info-am + +-install-info-am: +- + install-man: + +-install-pdf: install-pdf-am +- +-install-pdf-am: +- +-install-ps: install-ps-am +- +-install-ps-am: +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -577,24 +561,21 @@ + + ps-am: + +-uninstall-am: uninstall-desktopDATA uninstall-pkgconfigDATA \ +- uninstall-schemasDATA uninstall-serviceDATA uninstall-xmlDATA +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-desktopDATA uninstall-info-am \ ++ uninstall-pkgconfigDATA uninstall-schemasDATA \ ++ uninstall-serviceDATA uninstall-xmlDATA + + .PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-data-local \ +- install-desktopDATA install-dvi install-dvi-am install-exec \ +- install-exec-am install-html install-html-am install-info \ +- install-info-am install-man install-pdf install-pdf-am \ +- install-pkgconfigDATA install-ps install-ps-am \ ++ install-desktopDATA install-exec install-exec-am install-info \ ++ install-info-am install-man install-pkgconfigDATA \ + install-schemasDATA install-serviceDATA install-strip \ + install-xmlDATA installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- uninstall uninstall-am uninstall-desktopDATA \ ++ uninstall uninstall-am uninstall-desktopDATA uninstall-info-am \ + uninstall-pkgconfigDATA uninstall-schemasDATA \ + uninstall-serviceDATA uninstall-xmlDATA + +@@ -616,7 +597,6 @@ + @GCONF_SCHEMAS_INSTALL_TRUE@ done \ + @GCONF_SCHEMAS_INSTALL_TRUE@ fi + @GCONF_SCHEMAS_INSTALL_FALSE@install-data-local: +- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -urN gnome-settings-daemon-2.28.2//depcomp gnome-settings-daemon-2.28.2.new//depcomp +--- gnome-settings-daemon-2.28.2//depcomp 2010-03-10 03:49:29.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//depcomp 2010-04-21 19:02:52.134359549 -0700 +@@ -1,10 +1,9 @@ + #! /bin/sh + # depcomp - compile a program generating dependencies as side-effects + +-scriptversion=2009-04-28.21; # UTC ++scriptversion=2005-07-09.11 + +-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +-# Software Foundation, Inc. ++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + + # This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by +@@ -17,7 +16,9 @@ + # GNU General Public License for more details. + + # You should have received a copy of the GNU General Public License +-# along with this program. If not, see . ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. + + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -85,34 +86,12 @@ + depmode=dashmstdout + fi + +-cygpath_u="cygpath -u -f -" +-if test "$depmode" = msvcmsys; then +- # This is just like msvisualcpp but w/o cygpath translation. +- # Just convert the backslash-escaped backslashes to single forward +- # slashes to satisfy depend.m4 +- cygpath_u="sed s,\\\\\\\\,/,g" +- depmode=msvisualcpp +-fi +- + case "$depmode" in + gcc3) + ## gcc 3 implements dependency tracking that does exactly what + ## we want. Yay! Note: for some reason libtool 1.4 doesn't like + ## it if -MD -MP comes after the -MF stuff. Hmm. +-## Unfortunately, FreeBSD c89 acceptance of flags depends upon +-## the command line argument order; so add the flags where they +-## appear in depend2.am. Note that the slowdown incurred here +-## affects only configure: in makefiles, %FASTDEP% shortcuts this. +- for arg +- do +- case $arg in +- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; +- *) set fnord "$@" "$arg" ;; +- esac +- shift # fnord +- shift # $arg +- done +- "$@" ++ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else +@@ -199,14 +178,14 @@ + ' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +-' ' ' >> "$depfile" +- echo >> "$depfile" ++' ' ' >> $depfile ++ echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' + ' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ +- >> "$depfile" ++ >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile +@@ -222,39 +201,34 @@ + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. +- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` +- test "x$dir" = "x$object" && dir= +- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` ++ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` ++ tmpdepfile="$stripped.u" + if test "$libtool" = yes; then +- tmpdepfile1=$dir$base.u +- tmpdepfile2=$base.u +- tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else +- tmpdepfile1=$dir$base.u +- tmpdepfile2=$dir$base.u +- tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + ++ if test -f "$tmpdepfile"; then : ++ else ++ stripped=`echo "$stripped" | sed 's,^.*/,,'` ++ tmpdepfile="$stripped.u" ++ fi ++ + if test $stat -eq 0; then : + else +- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" ++ rm -f "$tmpdepfile" + exit $stat + fi + +- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" +- do +- test -f "$tmpdepfile" && break +- done + if test -f "$tmpdepfile"; then ++ outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. +- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" +- # That's a tab and a space in the []. +- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" ++ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" ++ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile +@@ -302,51 +276,6 @@ + rm -f "$tmpdepfile" + ;; + +-hp2) +- # The "hp" stanza above does not work with aCC (C++) and HP's ia64 +- # compilers, which have integrated preprocessors. The correct option +- # to use with these is +Maked; it writes dependencies to a file named +- # 'foo.d', which lands next to the object file, wherever that +- # happens to be. +- # Much of this is similar to the tru64 case; see comments there. +- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` +- test "x$dir" = "x$object" && dir= +- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` +- if test "$libtool" = yes; then +- tmpdepfile1=$dir$base.d +- tmpdepfile2=$dir.libs/$base.d +- "$@" -Wc,+Maked +- else +- tmpdepfile1=$dir$base.d +- tmpdepfile2=$dir$base.d +- "$@" +Maked +- fi +- stat=$? +- if test $stat -eq 0; then : +- else +- rm -f "$tmpdepfile1" "$tmpdepfile2" +- exit $stat +- fi +- +- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" +- do +- test -f "$tmpdepfile" && break +- done +- if test -f "$tmpdepfile"; then +- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" +- # Add `dependent.h:' lines. +- sed -ne '2,${ +- s/^ *// +- s/ \\*$// +- s/$/:/ +- p +- }' "$tmpdepfile" >> "$depfile" +- else +- echo "#dummy" > "$depfile" +- fi +- rm -f "$tmpdepfile" "$tmpdepfile2" +- ;; +- + tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. +@@ -359,13 +288,13 @@ + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a +- # static library. This mechanism is used in libtool 1.4 series to ++ # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two +- # compilations output dependencies in $dir.libs/$base.o.d and ++ # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is +@@ -416,7 +345,7 @@ + + # Remove the call to Libtool. + if test "$libtool" = yes; then +- while test "X$1" != 'X--mode=compile'; do ++ while test $1 != '--mode=compile'; do + shift + done + shift +@@ -467,39 +396,32 @@ + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then +- while test "X$1" != 'X--mode=compile'; do ++ while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift +- cleared=no eat=no +- for arg +- do ++ cleared=no ++ for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac +- if test $eat = yes; then +- eat=no +- continue +- fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. +- -arch) +- eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done +- obj_suffix=`echo "$object" | sed 's/^.*\././'` ++ obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" +@@ -519,7 +441,7 @@ + + # Remove the call to Libtool. + if test "$libtool" = yes; then +- while test "X$1" != 'X--mode=compile'; do ++ while test $1 != '--mode=compile'; do + shift + done + shift +@@ -557,27 +479,13 @@ + + msvisualcpp) + # Important note: in order to support this mode, a compiler *must* +- # always write the preprocessed file to stdout. ++ # always write the preprocessed file to stdout, regardless of -o, ++ # because we must use -o when running libtool. + "$@" || exit $? +- +- # Remove the call to Libtool. +- if test "$libtool" = yes; then +- while test "X$1" != 'X--mode=compile'; do +- shift +- done +- shift +- fi +- + IFS=" " + for arg + do + case "$arg" in +- -o) +- shift +- ;; +- $object) +- shift +- ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift +@@ -590,23 +498,16 @@ + ;; + esac + done +- "$@" -E 2>/dev/null | +- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" ++ "$@" -E | ++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" +- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" +- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +-msvcmsys) +- # This case exists only to let depend.m4 do its work. It works by +- # looking at the text of this script. This case will never be run, +- # since it is checked for above. +- exit 1 +- ;; +- + none) + exec "$@" + ;; +@@ -625,6 +526,5 @@ + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "scriptversion=" + # time-stamp-format: "%:y-%02m-%02d.%02H" +-# time-stamp-time-zone: "UTC" +-# time-stamp-end: "; # UTC" ++# time-stamp-end: "$" + # End: +diff -urN gnome-settings-daemon-2.28.2//gnome-settings-daemon/Makefile.in gnome-settings-daemon-2.28.2.new//gnome-settings-daemon/Makefile.in +--- gnome-settings-daemon-2.28.2//gnome-settings-daemon/Makefile.in 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//gnome-settings-daemon/Makefile.in 2010-04-21 19:02:48.661607416 -0700 +@@ -1,9 +1,8 @@ +-# Makefile.in generated by automake 1.11.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +-# Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,12 +16,15 @@ + + + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkgincludedir = $(includedir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ +-pkglibexecdir = $(libexecdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = .. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -47,7 +49,6 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = +-CONFIG_CLEAN_VPATH_FILES = + LTLIBRARIES = $(noinst_LTLIBRARIES) + am__DEPENDENCIES_1 = + libgsd_profile_la_DEPENDENCIES = $(am__DEPENDENCIES_1) +@@ -55,11 +56,8 @@ + am_libgsd_profile_la_OBJECTS = \ + libgsd_profile_la-gnome-settings-profile.lo $(am__objects_1) + libgsd_profile_la_OBJECTS = $(am_libgsd_profile_la_OBJECTS) +-libgsd_profile_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ +- $(LIBTOOLFLAGS) --mode=link $(CCLD) \ +- $(libgsd_profile_la_CFLAGS) $(CFLAGS) \ +- $(libgsd_profile_la_LDFLAGS) $(LDFLAGS) -o $@ + am__installdirs = "$(DESTDIR)$(gsddir)" "$(DESTDIR)$(apidir)" ++gsdPROGRAMS_INSTALL = $(INSTALL_PROGRAM) + PROGRAMS = $(gsd_PROGRAMS) + am_gnome_settings_daemon_OBJECTS = \ + gnome_settings_daemon-main.$(OBJEXT) \ +@@ -71,23 +69,17 @@ + gnome_settings_daemon_OBJECTS = $(am_gnome_settings_daemon_OBJECTS) + gnome_settings_daemon_DEPENDENCIES = libgsd-profile.la \ + $(am__DEPENDENCIES_1) +-gnome_settings_daemon_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ +- $(LIBTOOLFLAGS) --mode=link $(CCLD) \ +- $(gnome_settings_daemon_CFLAGS) $(CFLAGS) \ +- $(gnome_settings_daemon_LDFLAGS) $(LDFLAGS) -o $@ +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles +-am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libgsd_profile_la_SOURCES) \ + $(gnome_settings_daemon_SOURCES) + DIST_SOURCES = $(libgsd_profile_la_SOURCES) \ +@@ -97,28 +89,16 @@ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +-am__install_max = 40 +-am__nobase_strip_setup = \ +- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +-am__nobase_strip = \ +- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +-am__nobase_list = $(am__nobase_strip_setup); \ +- for p in $$list; do echo "$$p $$p"; done | \ +- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ +- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ +- if (++n[$$2] == $(am__install_max)) \ +- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ +- END { for (dir in files) print dir, files[dir] }' +-am__base_list = \ +- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ +- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++apiDATA_INSTALL = $(INSTALL_DATA) + DATA = $(api_DATA) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -153,6 +133,8 @@ + FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@ + FONTCONFIG_LIBS = @FONTCONFIG_LIBS@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +@@ -165,17 +147,45 @@ + GREP = @GREP@ + GSD_INTLTOOL_PLUGIN_RULE = @GSD_INTLTOOL_PLUGIN_RULE@ + GSD_PLUGIN_LDFLAGS = @GSD_PLUGIN_LDFLAGS@ +-INSTALL = @INSTALL@ ++GST_CFLAGS = @GST_CFLAGS@ ++GST_LIBS = @GST_LIBS@ ++HAVE_FONTCONFIG_FALSE = @HAVE_FONTCONFIG_FALSE@ ++HAVE_FONTCONFIG_TRUE = @HAVE_FONTCONFIG_TRUE@ ++HAVE_GSTREAMER_FALSE = @HAVE_GSTREAMER_FALSE@ ++HAVE_GSTREAMER_TRUE = @HAVE_GSTREAMER_TRUE@ ++HAVE_PULSE_FALSE = @HAVE_PULSE_FALSE@ ++HAVE_PULSE_TRUE = @HAVE_PULSE_TRUE@ ++HAVE_XINPUT_FALSE = @HAVE_XINPUT_FALSE@ ++HAVE_XINPUT_TRUE = @HAVE_XINPUT_TRUE@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ + LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBEXECDIR = @LIBEXECDIR@ +@@ -189,8 +199,10 @@ + LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ ++MAINT = @MAINT@ ++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ ++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ +@@ -237,13 +249,13 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -255,7 +267,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -285,12 +296,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + INCLUDES = \ + -DDATADIR=\""$(datadir)"\" \ +@@ -376,18 +383,18 @@ + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ +- && { if test -f $@; then exit 0; else break; fi; }; \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gnome-settings-daemon/Makefile'; \ +- $(am__cd) $(top_srcdir) && \ +- $(AUTOMAKE) --gnu gnome-settings-daemon/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gnome-settings-daemon/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu gnome-settings-daemon/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -401,11 +408,10 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(am__aclocal_m4_deps): + + clean-noinstLTLIBRARIES: + -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) +@@ -416,53 +422,38 @@ + rm -f "$${dir}/so_locations"; \ + done + libgsd-profile.la: $(libgsd_profile_la_OBJECTS) $(libgsd_profile_la_DEPENDENCIES) +- $(libgsd_profile_la_LINK) $(libgsd_profile_la_OBJECTS) $(libgsd_profile_la_LIBADD) $(LIBS) ++ $(LINK) $(libgsd_profile_la_LDFLAGS) $(libgsd_profile_la_OBJECTS) $(libgsd_profile_la_LIBADD) $(LIBS) + install-gsdPROGRAMS: $(gsd_PROGRAMS) + @$(NORMAL_INSTALL) +- test -z "$(gsddir)" || $(MKDIR_P) "$(DESTDIR)$(gsddir)" +- @list='$(gsd_PROGRAMS)'; test -n "$(gsddir)" || list=; \ +- for p in $$list; do echo "$$p $$p"; done | \ +- sed 's/$(EXEEXT)$$//' | \ +- while read p p1; do if test -f $$p || test -f $$p1; \ +- then echo "$$p"; echo "$$p"; else :; fi; \ +- done | \ +- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ +- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ +- sed 'N;N;N;s,\n, ,g' | \ +- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ +- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ +- if ($$2 == $$4) files[d] = files[d] " " $$1; \ +- else { print "f", $$3 "/" $$4, $$1; } } \ +- END { for (d in files) print "f", d, files[d] }' | \ +- while read type dir files; do \ +- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ +- test -z "$$files" || { \ +- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(gsddir)$$dir'"; \ +- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(gsddir)$$dir" || exit $$?; \ +- } \ +- ; done ++ test -z "$(gsddir)" || $(mkdir_p) "$(DESTDIR)$(gsddir)" ++ @list='$(gsd_PROGRAMS)'; for p in $$list; do \ ++ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ++ if test -f $$p \ ++ || test -f $$p1 \ ++ ; then \ ++ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(gsdPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(gsddir)/$$f'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(gsdPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(gsddir)/$$f" || exit 1; \ ++ else :; fi; \ ++ done + + uninstall-gsdPROGRAMS: + @$(NORMAL_UNINSTALL) +- @list='$(gsd_PROGRAMS)'; test -n "$(gsddir)" || list=; \ +- files=`for p in $$list; do echo "$$p"; done | \ +- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ +- -e 's/$$/$(EXEEXT)/' `; \ +- test -n "$$list" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(gsddir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(gsddir)" && rm -f $$files ++ @list='$(gsd_PROGRAMS)'; for p in $$list; do \ ++ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ ++ echo " rm -f '$(DESTDIR)$(gsddir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(gsddir)/$$f"; \ ++ done + + clean-gsdPROGRAMS: +- @list='$(gsd_PROGRAMS)'; test -n "$$list" || exit 0; \ +- echo " rm -f" $$list; \ +- rm -f $$list || exit $$?; \ +- test -n "$(EXEEXT)" || exit 0; \ +- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f" $$list; \ +- rm -f $$list ++ @list='$(gsd_PROGRAMS)'; for p in $$list; do \ ++ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f $$p $$f"; \ ++ rm -f $$p $$f ; \ ++ done + gnome-settings-daemon$(EXEEXT): $(gnome_settings_daemon_OBJECTS) $(gnome_settings_daemon_DEPENDENCIES) + @rm -f gnome-settings-daemon$(EXEEXT) +- $(gnome_settings_daemon_LINK) $(gnome_settings_daemon_OBJECTS) $(gnome_settings_daemon_LDADD) $(LIBS) ++ $(LINK) $(gnome_settings_daemon_LDFLAGS) $(gnome_settings_daemon_OBJECTS) $(gnome_settings_daemon_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -478,99 +469,99 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Plo@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + libgsd_profile_la-gnome-settings-profile.lo: gnome-settings-profile.c +-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgsd_profile_la_CPPFLAGS) $(CPPFLAGS) $(libgsd_profile_la_CFLAGS) $(CFLAGS) -MT libgsd_profile_la-gnome-settings-profile.lo -MD -MP -MF $(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Tpo -c -o libgsd_profile_la-gnome-settings-profile.lo `test -f 'gnome-settings-profile.c' || echo '$(srcdir)/'`gnome-settings-profile.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Tpo $(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Plo ++@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgsd_profile_la_CPPFLAGS) $(CPPFLAGS) $(libgsd_profile_la_CFLAGS) $(CFLAGS) -MT libgsd_profile_la-gnome-settings-profile.lo -MD -MP -MF "$(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Tpo" -c -o libgsd_profile_la-gnome-settings-profile.lo `test -f 'gnome-settings-profile.c' || echo '$(srcdir)/'`gnome-settings-profile.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Tpo" "$(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Plo"; else rm -f "$(DEPDIR)/libgsd_profile_la-gnome-settings-profile.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-profile.c' object='libgsd_profile_la-gnome-settings-profile.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgsd_profile_la_CPPFLAGS) $(CPPFLAGS) $(libgsd_profile_la_CFLAGS) $(CFLAGS) -c -o libgsd_profile_la-gnome-settings-profile.lo `test -f 'gnome-settings-profile.c' || echo '$(srcdir)/'`gnome-settings-profile.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgsd_profile_la_CPPFLAGS) $(CPPFLAGS) $(libgsd_profile_la_CFLAGS) $(CFLAGS) -c -o libgsd_profile_la-gnome-settings-profile.lo `test -f 'gnome-settings-profile.c' || echo '$(srcdir)/'`gnome-settings-profile.c + + gnome_settings_daemon-main.o: main.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-main.o -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-main.Tpo -c -o gnome_settings_daemon-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-main.Tpo $(DEPDIR)/gnome_settings_daemon-main.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-main.o -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-main.Tpo" -c -o gnome_settings_daemon-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-main.Tpo" "$(DEPDIR)/gnome_settings_daemon-main.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-main.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='gnome_settings_daemon-main.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c + + gnome_settings_daemon-main.obj: main.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-main.obj -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-main.Tpo -c -o gnome_settings_daemon-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-main.Tpo $(DEPDIR)/gnome_settings_daemon-main.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-main.obj -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-main.Tpo" -c -o gnome_settings_daemon-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-main.Tpo" "$(DEPDIR)/gnome_settings_daemon-main.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-main.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='gnome_settings_daemon-main.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` + + gnome_settings_daemon-gnome-settings-manager.o: gnome-settings-manager.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-manager.o -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo -c -o gnome_settings_daemon-gnome-settings-manager.o `test -f 'gnome-settings-manager.c' || echo '$(srcdir)/'`gnome-settings-manager.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-manager.o -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo" -c -o gnome_settings_daemon-gnome-settings-manager.o `test -f 'gnome-settings-manager.c' || echo '$(srcdir)/'`gnome-settings-manager.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-manager.c' object='gnome_settings_daemon-gnome-settings-manager.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-manager.o `test -f 'gnome-settings-manager.c' || echo '$(srcdir)/'`gnome-settings-manager.c + + gnome_settings_daemon-gnome-settings-manager.obj: gnome-settings-manager.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-manager.obj -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo -c -o gnome_settings_daemon-gnome-settings-manager.obj `if test -f 'gnome-settings-manager.c'; then $(CYGPATH_W) 'gnome-settings-manager.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-manager.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-manager.obj -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo" -c -o gnome_settings_daemon-gnome-settings-manager.obj `if test -f 'gnome-settings-manager.c'; then $(CYGPATH_W) 'gnome-settings-manager.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-manager.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-manager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-manager.c' object='gnome_settings_daemon-gnome-settings-manager.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-manager.obj `if test -f 'gnome-settings-manager.c'; then $(CYGPATH_W) 'gnome-settings-manager.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-manager.c'; fi` + + gnome_settings_daemon-gnome-settings-plugin.o: gnome-settings-plugin.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin.o -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo -c -o gnome_settings_daemon-gnome-settings-plugin.o `test -f 'gnome-settings-plugin.c' || echo '$(srcdir)/'`gnome-settings-plugin.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin.o -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo" -c -o gnome_settings_daemon-gnome-settings-plugin.o `test -f 'gnome-settings-plugin.c' || echo '$(srcdir)/'`gnome-settings-plugin.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-plugin.c' object='gnome_settings_daemon-gnome-settings-plugin.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-plugin.o `test -f 'gnome-settings-plugin.c' || echo '$(srcdir)/'`gnome-settings-plugin.c + + gnome_settings_daemon-gnome-settings-plugin.obj: gnome-settings-plugin.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin.obj -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo -c -o gnome_settings_daemon-gnome-settings-plugin.obj `if test -f 'gnome-settings-plugin.c'; then $(CYGPATH_W) 'gnome-settings-plugin.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-plugin.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin.obj -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo" -c -o gnome_settings_daemon-gnome-settings-plugin.obj `if test -f 'gnome-settings-plugin.c'; then $(CYGPATH_W) 'gnome-settings-plugin.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-plugin.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-plugin.c' object='gnome_settings_daemon-gnome-settings-plugin.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-plugin.obj `if test -f 'gnome-settings-plugin.c'; then $(CYGPATH_W) 'gnome-settings-plugin.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-plugin.c'; fi` + + gnome_settings_daemon-gnome-settings-plugin-info.o: gnome-settings-plugin-info.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin-info.o -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo -c -o gnome_settings_daemon-gnome-settings-plugin-info.o `test -f 'gnome-settings-plugin-info.c' || echo '$(srcdir)/'`gnome-settings-plugin-info.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin-info.o -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo" -c -o gnome_settings_daemon-gnome-settings-plugin-info.o `test -f 'gnome-settings-plugin-info.c' || echo '$(srcdir)/'`gnome-settings-plugin-info.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-plugin-info.c' object='gnome_settings_daemon-gnome-settings-plugin-info.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-plugin-info.o `test -f 'gnome-settings-plugin-info.c' || echo '$(srcdir)/'`gnome-settings-plugin-info.c + + gnome_settings_daemon-gnome-settings-plugin-info.obj: gnome-settings-plugin-info.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin-info.obj -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo -c -o gnome_settings_daemon-gnome-settings-plugin-info.obj `if test -f 'gnome-settings-plugin-info.c'; then $(CYGPATH_W) 'gnome-settings-plugin-info.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-plugin-info.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-plugin-info.obj -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo" -c -o gnome_settings_daemon-gnome-settings-plugin-info.obj `if test -f 'gnome-settings-plugin-info.c'; then $(CYGPATH_W) 'gnome-settings-plugin-info.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-plugin-info.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-plugin-info.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-plugin-info.c' object='gnome_settings_daemon-gnome-settings-plugin-info.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-plugin-info.obj `if test -f 'gnome-settings-plugin-info.c'; then $(CYGPATH_W) 'gnome-settings-plugin-info.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-plugin-info.c'; fi` + + gnome_settings_daemon-gnome-settings-module.o: gnome-settings-module.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-module.o -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo -c -o gnome_settings_daemon-gnome-settings-module.o `test -f 'gnome-settings-module.c' || echo '$(srcdir)/'`gnome-settings-module.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-module.o -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo" -c -o gnome_settings_daemon-gnome-settings-module.o `test -f 'gnome-settings-module.c' || echo '$(srcdir)/'`gnome-settings-module.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-module.c' object='gnome_settings_daemon-gnome-settings-module.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-module.o `test -f 'gnome-settings-module.c' || echo '$(srcdir)/'`gnome-settings-module.c + + gnome_settings_daemon-gnome-settings-module.obj: gnome-settings-module.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-module.obj -MD -MP -MF $(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo -c -o gnome_settings_daemon-gnome-settings-module.obj `if test -f 'gnome-settings-module.c'; then $(CYGPATH_W) 'gnome-settings-module.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-module.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo $(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -MT gnome_settings_daemon-gnome-settings-module.obj -MD -MP -MF "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo" -c -o gnome_settings_daemon-gnome-settings-module.obj `if test -f 'gnome-settings-module.c'; then $(CYGPATH_W) 'gnome-settings-module.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-module.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo" "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Po"; else rm -f "$(DEPDIR)/gnome_settings_daemon-gnome-settings-module.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gnome-settings-module.c' object='gnome_settings_daemon-gnome-settings-module.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gnome_settings_daemon_CPPFLAGS) $(CPPFLAGS) $(gnome_settings_daemon_CFLAGS) $(CFLAGS) -c -o gnome_settings_daemon-gnome-settings-module.obj `if test -f 'gnome-settings-module.c'; then $(CYGPATH_W) 'gnome-settings-module.c'; else $(CYGPATH_W) '$(srcdir)/gnome-settings-module.c'; fi` +@@ -580,106 +571,100 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-apiDATA: $(api_DATA) + @$(NORMAL_INSTALL) +- test -z "$(apidir)" || $(MKDIR_P) "$(DESTDIR)$(apidir)" +- @list='$(api_DATA)'; test -n "$(apidir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(apidir)" || $(mkdir_p) "$(DESTDIR)$(apidir)" ++ @list='$(api_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(apidir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(apidir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(apiDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(apidir)/$$f'"; \ ++ $(apiDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(apidir)/$$f"; \ + done + + uninstall-apiDATA: + @$(NORMAL_UNINSTALL) +- @list='$(api_DATA)'; test -n "$(apidir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(apidir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(apidir)" && rm -f $$files ++ @list='$(api_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(apidir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(apidir)/$$f"; \ ++ done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- set x; \ ++ tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- shift; \ +- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- if test $$# -gt 0; then \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- "$$@" $$unique; \ +- else \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$unique; \ +- fi; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$unique" \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$unique ++ $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && $(am__cd) $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) "$$here" ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test -d "$(distdir)/$$file"; then \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ +- fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ +- test -f "$(distdir)/$$file" \ +- || cp -p $$d/$$file "$(distdir)/$$file" \ ++ test -f $(distdir)/$$file \ ++ || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +@@ -689,7 +674,7 @@ + all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) + installdirs: + for dir in "$(DESTDIR)$(gsddir)" "$(DESTDIR)$(apidir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) install-am +@@ -713,7 +698,6 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) +- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + + maintainer-clean-generic: + @echo "This command is intended for maintainers to use" +@@ -728,7 +712,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -736,38 +720,18 @@ + + html: html-am + +-html-am: +- + info: info-am + + info-am: + + install-data-am: install-apiDATA install-gsdPROGRAMS + +-install-dvi: install-dvi-am +- +-install-dvi-am: +- + install-exec-am: + +-install-html: install-html-am +- +-install-html-am: +- + install-info: install-info-am + +-install-info-am: +- + install-man: + +-install-pdf: install-pdf-am +- +-install-pdf-am: +- +-install-ps: install-ps-am +- +-install-ps-am: +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -788,24 +752,21 @@ + + ps-am: + +-uninstall-am: uninstall-apiDATA uninstall-gsdPROGRAMS +- +-.MAKE: all check install install-am install-strip ++uninstall-am: uninstall-apiDATA uninstall-gsdPROGRAMS \ ++ uninstall-info-am + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-gsdPROGRAMS clean-libtool clean-noinstLTLIBRARIES ctags \ + distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-apiDATA \ +- install-data install-data-am install-dvi install-dvi-am \ +- install-exec install-exec-am install-gsdPROGRAMS install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++ install-data install-data-am install-exec install-exec-am \ ++ install-gsdPROGRAMS install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ +- uninstall-apiDATA uninstall-gsdPROGRAMS ++ uninstall-apiDATA uninstall-gsdPROGRAMS uninstall-info-am + + + gnome-settings-manager-glue.h: gnome-settings-manager.xml Makefile.am +@@ -815,7 +776,6 @@ + dbus-binding-tool --prefix=gnome_settings_manager --mode=glib-client $< > $@ + + # vim: ts=8 +- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -urN gnome-settings-daemon-2.28.2//INSTALL gnome-settings-daemon-2.28.2.new//INSTALL +--- gnome-settings-daemon-2.28.2//INSTALL 2009-07-27 15:27:02.000000000 -0700 ++++ gnome-settings-daemon-2.28.2.new//INSTALL 2010-04-21 19:02:52.324370332 -0700 +@@ -1,8 +1,8 @@ + Installation Instructions + ************************* + +-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +-2006, 2007 Free Software Foundation, Inc. ++Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free ++Software Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives + unlimited permission to copy, distribute and modify it. +@@ -10,10 +10,7 @@ + Basic Installation + ================== + +-Briefly, the shell commands `./configure; make; make install' should +-configure, build, and install this package. The following +-more-detailed instructions are generic; see the `README' file for +-instructions specific to this package. ++These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for + various system-dependent variables used during compilation. It uses +@@ -26,9 +23,9 @@ + + It can also use an optional file (typically called `config.cache' + and enabled with `--cache-file=config.cache' or simply `-C') that saves +-the results of its tests to speed up reconfiguring. Caching is ++the results of its tests to speed up reconfiguring. (Caching is + disabled by default to prevent problems with accidental use of stale +-cache files. ++cache files.) + + If you need to do unusual things to compile the package, please try + to figure out how `configure' could check whether to do them, and mail +@@ -38,17 +35,20 @@ + may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +-`configure' by a program called `autoconf'. You need `configure.ac' if +-you want to change it or regenerate `configure' using a newer version +-of `autoconf'. ++`configure' by a program called `autoconf'. You only need ++`configure.ac' if you want to change it or regenerate `configure' using ++a newer version of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type +- `./configure' to configure the package for your system. ++ `./configure' to configure the package for your system. If you're ++ using `csh' on an old version of System V, you might need to type ++ `sh ./configure' instead to prevent `csh' from trying to execute ++ `configure' itself. + +- Running `configure' might take a while. While running, it prints +- some messages telling which features it is checking for. ++ Running `configure' takes awhile. While running, it prints some ++ messages telling which features it is checking for. + + 2. Type `make' to compile the package. + +@@ -67,9 +67,6 @@ + all sorts of other programs in order to regenerate files that came + with the distribution. + +- 6. Often, you can also type `make uninstall' to remove the installed +- files again. +- + Compilers and Options + ===================== + +@@ -81,7 +78,7 @@ + by setting variables in the command line or in the environment. Here + is an example: + +- ./configure CC=c99 CFLAGS=-g LIBS=-lposix ++ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +@@ -90,15 +87,17 @@ + + You can compile the package for more than one kind of computer at the + same time, by placing the object files for each architecture in their +-own directory. To do this, you can use GNU `make'. `cd' to the ++own directory. To do this, you must use a version of `make' that ++supports the `VPATH' variable, such as GNU `make'. `cd' to the + directory where you want the object files and executables to go and run + the `configure' script. `configure' automatically checks for the + source code in the directory that `configure' is in and in `..'. + +- With a non-GNU `make', it is safer to compile the package for one +-architecture at a time in the source code directory. After you have +-installed the package for one architecture, use `make distclean' before +-reconfiguring for another architecture. ++ If you have to use a `make' that does not support the `VPATH' ++variable, you have to compile the package for one architecture at a ++time in the source code directory. After you have installed the ++package for one architecture, use `make distclean' before reconfiguring ++for another architecture. + + Installation Names + ================== +@@ -191,12 +190,12 @@ + ./configure CC=/usr/local2/bin/gcc + + causes the specified `gcc' to be used as the C compiler (unless it is +-overridden in the site shell script). ++overridden in the site shell script). Here is a another example: + +-Unfortunately, this technique does not work for `CONFIG_SHELL' due to +-an Autoconf bug. Until the bug is fixed you can use this workaround: ++ /bin/bash ./configure CONFIG_SHELL=/bin/bash + +- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash ++Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent ++configuration-related scripts to be executed by `/bin/bash'. + + `configure' Invocation + ====================== +diff -urN gnome-settings-daemon-2.28.2//install-sh gnome-settings-daemon-2.28.2.new//install-sh +--- gnome-settings-daemon-2.28.2//install-sh 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//install-sh 2010-04-21 19:02:48.257417465 -0700 +@@ -1,7 +1,7 @@ + #!/bin/sh + # install - install a program, script, or datafile + +-scriptversion=2009-04-28.21; # UTC ++scriptversion=2005-05-14.22 + + # This originates from X11R5 (mit/util/scripts/install.sh), which was + # later released in X11R6 (xc/config/util/install.sh) with the +@@ -39,68 +39,38 @@ + # when there is no Makefile. + # + # This script is compatible with the BSD install script, but was written +-# from scratch. +- +-nl=' +-' +-IFS=" "" $nl" ++# from scratch. It can only install one file at a time, a restriction ++# shared with many OS's install programs. + + # set DOITPROG to echo to test this script + + # Don't use :- since 4.3BSD and earlier shells don't like it. +-doit=${DOITPROG-} +-if test -z "$doit"; then +- doit_exec=exec +-else +- doit_exec=$doit +-fi ++doit="${DOITPROG-}" + +-# Put in absolute file names if you don't have them in your path; +-# or use environment vars. ++# put in absolute paths if you don't have them in your path; or use env. vars. + +-chgrpprog=${CHGRPPROG-chgrp} +-chmodprog=${CHMODPROG-chmod} +-chownprog=${CHOWNPROG-chown} +-cmpprog=${CMPPROG-cmp} +-cpprog=${CPPROG-cp} +-mkdirprog=${MKDIRPROG-mkdir} +-mvprog=${MVPROG-mv} +-rmprog=${RMPROG-rm} +-stripprog=${STRIPPROG-strip} +- +-posix_glob='?' +-initialize_posix_glob=' +- test "$posix_glob" != "?" || { +- if (set -f) 2>/dev/null; then +- posix_glob= +- else +- posix_glob=: +- fi +- } +-' ++mvprog="${MVPROG-mv}" ++cpprog="${CPPROG-cp}" ++chmodprog="${CHMODPROG-chmod}" ++chownprog="${CHOWNPROG-chown}" ++chgrpprog="${CHGRPPROG-chgrp}" ++stripprog="${STRIPPROG-strip}" ++rmprog="${RMPROG-rm}" ++mkdirprog="${MKDIRPROG-mkdir}" + +-posix_mkdir= +- +-# Desired mode of installed file. +-mode=0755 +- +-chgrpcmd= +-chmodcmd=$chmodprog ++chmodcmd="$chmodprog 0755" + chowncmd= +-mvcmd=$mvprog +-rmcmd="$rmprog -f" ++chgrpcmd= + stripcmd= +- ++rmcmd="$rmprog -f" ++mvcmd="$mvprog" + src= + dst= + dir_arg= +-dst_arg= +- +-copy_on_change=false ++dstarg= + no_target_directory= + +-usage="\ +-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE ++usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... +@@ -110,86 +80,81 @@ + In the 4th, create DIRECTORIES. + + Options: +- --help display this help and exit. +- --version display version info and exit. +- +- -c (ignored) +- -C install only if different (preserve the last data modification time) +- -d create directories instead of installing files. +- -g GROUP $chgrpprog installed files to GROUP. +- -m MODE $chmodprog installed files to MODE. +- -o USER $chownprog installed files to USER. +- -s $stripprog installed files. +- -t DIRECTORY install into DIRECTORY. +- -T report an error if DSTFILE is a directory. ++-c (ignored) ++-d create directories instead of installing files. ++-g GROUP $chgrpprog installed files to GROUP. ++-m MODE $chmodprog installed files to MODE. ++-o USER $chownprog installed files to USER. ++-s $stripprog installed files. ++-t DIRECTORY install into DIRECTORY. ++-T report an error if DSTFILE is a directory. ++--help display this help and exit. ++--version display version info and exit. + + Environment variables override the default commands: +- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG +- RMPROG STRIPPROG ++ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG + " + +-while test $# -ne 0; do ++while test -n "$1"; do + case $1 in +- -c) ;; ++ -c) shift ++ continue;; + +- -C) copy_on_change=true;; +- +- -d) dir_arg=true;; ++ -d) dir_arg=true ++ shift ++ continue;; + + -g) chgrpcmd="$chgrpprog $2" +- shift;; ++ shift ++ shift ++ continue;; + + --help) echo "$usage"; exit $?;; + +- -m) mode=$2 +- case $mode in +- *' '* | *' '* | *' +-'* | *'*'* | *'?'* | *'['*) +- echo "$0: invalid mode: $mode" >&2 +- exit 1;; +- esac +- shift;; ++ -m) chmodcmd="$chmodprog $2" ++ shift ++ shift ++ continue;; + + -o) chowncmd="$chownprog $2" +- shift;; +- +- -s) stripcmd=$stripprog;; +- +- -t) dst_arg=$2 +- shift;; +- +- -T) no_target_directory=true;; ++ shift ++ shift ++ continue;; ++ ++ -s) stripcmd=$stripprog ++ shift ++ continue;; ++ ++ -t) dstarg=$2 ++ shift ++ shift ++ continue;; ++ ++ -T) no_target_directory=true ++ shift ++ continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + +- --) shift ++ *) # When -d is used, all remaining arguments are directories to create. ++ # When -t is used, the destination is already specified. ++ test -n "$dir_arg$dstarg" && break ++ # Otherwise, the last argument is the destination. Remove it from $@. ++ for arg ++ do ++ if test -n "$dstarg"; then ++ # $@ is not empty: it contains at least $arg. ++ set fnord "$@" "$dstarg" ++ shift # fnord ++ fi ++ shift # arg ++ dstarg=$arg ++ done + break;; +- +- -*) echo "$0: invalid option: $1" >&2 +- exit 1;; +- +- *) break;; + esac +- shift + done + +-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then +- # When -d is used, all remaining arguments are directories to create. +- # When -t is used, the destination is already specified. +- # Otherwise, the last argument is the destination. Remove it from $@. +- for arg +- do +- if test -n "$dst_arg"; then +- # $@ is not empty: it contains at least $arg. +- set fnord "$@" "$dst_arg" +- shift # fnord +- fi +- shift # arg +- dst_arg=$arg +- done +-fi +- +-if test $# -eq 0; then ++if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 +@@ -199,47 +164,24 @@ + exit 0 + fi + +-if test -z "$dir_arg"; then +- trap '(exit $?); exit' 1 2 13 15 +- +- # Set umask so as not to create temps with too-generous modes. +- # However, 'strip' requires both read and write access to temps. +- case $mode in +- # Optimize common cases. +- *644) cp_umask=133;; +- *755) cp_umask=22;; +- +- *[0-7]) +- if test -z "$stripcmd"; then +- u_plus_rw= +- else +- u_plus_rw='% 200' +- fi +- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; +- *) +- if test -z "$stripcmd"; then +- u_plus_rw= +- else +- u_plus_rw=,u+rw +- fi +- cp_umask=$mode$u_plus_rw;; +- esac +-fi +- + for src + do + # Protect names starting with `-'. + case $src in +- -*) src=./$src;; ++ -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src +- dstdir=$dst +- test -d "$dstdir" +- dstdir_status=$? +- else ++ src= + ++ if test -d "$dst"; then ++ mkdircmd=: ++ chmodcmd= ++ else ++ mkdircmd=$mkdirprog ++ fi ++ else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. +@@ -248,199 +190,71 @@ + exit 1 + fi + +- if test -z "$dst_arg"; then ++ if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + +- dst=$dst_arg ++ dst=$dstarg + # Protect names starting with `-'. + case $dst in +- -*) dst=./$dst;; ++ -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then +- echo "$0: $dst_arg: Is a directory" >&2 ++ echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi +- dstdir=$dst +- dst=$dstdir/`basename "$src"` +- dstdir_status=0 +- else +- # Prefer dirname, but fall back on a substitute if dirname fails. +- dstdir=` +- (dirname "$dst") 2>/dev/null || +- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$dst" : 'X\(//\)[^/]' \| \ +- X"$dst" : 'X\(//\)$' \| \ +- X"$dst" : 'X\(/\)' \| . 2>/dev/null || +- echo X"$dst" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q' +- ` +- +- test -d "$dstdir" +- dstdir_status=$? ++ dst=$dst/`basename "$src"` + fi + fi + +- obsolete_mkdir_used=false +- +- if test $dstdir_status != 0; then +- case $posix_mkdir in +- '') +- # Create intermediate dirs using mode 755 as modified by the umask. +- # This is like FreeBSD 'install' as of 1997-10-28. +- umask=`umask` +- case $stripcmd.$umask in +- # Optimize common cases. +- *[2367][2367]) mkdir_umask=$umask;; +- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; +- +- *[0-7]) +- mkdir_umask=`expr $umask + 22 \ +- - $umask % 100 % 40 + $umask % 20 \ +- - $umask % 10 % 4 + $umask % 2 +- `;; +- *) mkdir_umask=$umask,go-w;; +- esac +- +- # With -d, create the new directory with the user-specified mode. +- # Otherwise, rely on $mkdir_umask. +- if test -n "$dir_arg"; then +- mkdir_mode=-m$mode +- else +- mkdir_mode= +- fi +- +- posix_mkdir=false +- case $umask in +- *[123567][0-7][0-7]) +- # POSIX mkdir -p sets u+wx bits regardless of umask, which +- # is incompatible with FreeBSD 'install' when (umask & 300) != 0. +- ;; +- *) +- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ +- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 +- +- if (umask $mkdir_umask && +- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 +- then +- if test -z "$dir_arg" || { +- # Check for POSIX incompatibilities with -m. +- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or +- # other-writeable bit of parent directory when it shouldn't. +- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. +- ls_ld_tmpdir=`ls -ld "$tmpdir"` +- case $ls_ld_tmpdir in +- d????-?r-*) different_mode=700;; +- d????-?--*) different_mode=755;; +- *) false;; +- esac && +- $mkdirprog -m$different_mode -p -- "$tmpdir" && { +- ls_ld_tmpdir_1=`ls -ld "$tmpdir"` +- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" +- } +- } +- then posix_mkdir=: +- fi +- rmdir "$tmpdir/d" "$tmpdir" +- else +- # Remove any dirs left behind by ancient mkdir implementations. +- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null +- fi +- trap '' 0;; +- esac;; +- esac ++ # This sed command emulates the dirname command. ++ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + +- if +- $posix_mkdir && ( +- umask $mkdir_umask && +- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" +- ) +- then : +- else ++ # Make sure that the destination directory exists. + +- # The umask is ridiculous, or mkdir does not conform to POSIX, +- # or it failed possibly due to a race condition. Create the +- # directory the slow way, step by step, checking for races as we go. +- +- case $dstdir in +- /*) prefix='/';; +- -*) prefix='./';; +- *) prefix='';; +- esac +- +- eval "$initialize_posix_glob" +- +- oIFS=$IFS +- IFS=/ +- $posix_glob set -f +- set fnord $dstdir +- shift +- $posix_glob set +f +- IFS=$oIFS ++ # Skip lots of stat calls in the usual case. ++ if test ! -d "$dstdir"; then ++ defaultIFS=' ++ ' ++ IFS="${IFS-$defaultIFS}" ++ ++ oIFS=$IFS ++ # Some sh's can't handle IFS=/ for some reason. ++ IFS='%' ++ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` ++ shift ++ IFS=$oIFS + +- prefixes= ++ pathcomp= + +- for d +- do +- test -z "$d" && continue +- +- prefix=$prefix$d +- if test -d "$prefix"; then +- prefixes= +- else +- if $posix_mkdir; then +- (umask=$mkdir_umask && +- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break +- # Don't fail if two instances are running concurrently. +- test -d "$prefix" || exit 1 +- else +- case $prefix in +- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; +- *) qprefix=$prefix;; +- esac +- prefixes="$prefixes '$qprefix'" +- fi +- fi +- prefix=$prefix/ +- done +- +- if test -n "$prefixes"; then +- # Don't fail if two instances are running concurrently. +- (umask $mkdir_umask && +- eval "\$doit_exec \$mkdirprog $prefixes") || +- test -d "$dstdir" || exit 1 +- obsolete_mkdir_used=true ++ while test $# -ne 0 ; do ++ pathcomp=$pathcomp$1 ++ shift ++ if test ! -d "$pathcomp"; then ++ $mkdirprog "$pathcomp" ++ # mkdir can fail with a `File exist' error in case several ++ # install-sh are creating the directory concurrently. This ++ # is OK. ++ test -d "$pathcomp" || exit + fi +- fi ++ pathcomp=$pathcomp/ ++ done + fi + + if test -n "$dir_arg"; then +- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && +- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && +- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || +- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 ++ $doit $mkdircmd "$dst" \ ++ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ ++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ ++ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ ++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } ++ + else ++ dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ +@@ -448,9 +262,10 @@ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 ++ trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. +- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && ++ $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # +@@ -458,63 +273,51 @@ + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # +- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && +- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && +- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && +- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && +- +- # If -C, don't bother to copy if it wouldn't change the file. +- if $copy_on_change && +- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && +- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && +- +- eval "$initialize_posix_glob" && +- $posix_glob set -f && +- set X $old && old=:$2:$4:$5:$6 && +- set X $new && new=:$2:$4:$5:$6 && +- $posix_glob set +f && +- +- test "$old" = "$new" && +- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 +- then +- rm -f "$dsttmp" +- else +- # Rename the file to the real destination. +- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || +- +- # The rename failed, perhaps because mv can't rename something else +- # to itself, or perhaps because mv is so ancient that it does not +- # support -f. +- { +- # Now remove or move aside any old file at destination location. +- # We try this two ways since rm can't unlink itself on some +- # systems and the destination file might be busy for other +- # reasons. In this case, the final cleanup might fail but the new +- # file should still install successfully. +- { +- test ! -f "$dst" || +- $doit $rmcmd -f "$dst" 2>/dev/null || +- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && +- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } +- } || +- { echo "$0: cannot unlink or rename $dst" >&2 +- (exit 1); exit 1 +- } +- } && +- +- # Now rename the file to the real destination. +- $doit $mvcmd "$dsttmp" "$dst" +- } +- fi || exit 1 +- +- trap '' 0 +- fi ++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ ++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ ++ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ ++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && ++ ++ # Now rename the file to the real destination. ++ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ ++ || { ++ # The rename failed, perhaps because mv can't rename something else ++ # to itself, or perhaps because mv is so ancient that it does not ++ # support -f. ++ ++ # Now remove or move aside any old file at destination location. ++ # We try this two ways since rm can't unlink itself on some ++ # systems and the destination file might be busy for other ++ # reasons. In this case, the final cleanup might fail but the new ++ # file should still install successfully. ++ { ++ if test -f "$dstdir/$dstfile"; then ++ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ ++ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ ++ || { ++ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 ++ (exit 1); exit 1 ++ } ++ else ++ : ++ fi ++ } && ++ ++ # Now rename the file to the real destination. ++ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" ++ } ++ } ++ fi || { (exit 1); exit 1; } + done + ++# The final little trick to "correctly" pass the exit status to the exit trap. ++{ ++ (exit 0); exit 0 ++} ++ + # Local variables: + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "scriptversion=" + # time-stamp-format: "%:y-%02m-%02d.%02H" +-# time-stamp-time-zone: "UTC" +-# time-stamp-end: "; # UTC" ++# time-stamp-end: "$" + # End: +diff -urN gnome-settings-daemon-2.28.2//ltmain.sh gnome-settings-daemon-2.28.2.new//ltmain.sh +--- gnome-settings-daemon-2.28.2//ltmain.sh 2010-03-10 03:49:23.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//ltmain.sh 2010-04-21 19:02:41.795359511 -0700 +@@ -65,7 +65,7 @@ + # compiler: $LTCC + # compiler flags: $LTCFLAGS + # linker: $LD (gnu? $with_gnu_ld) +-# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1 ++# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2 + # automake: $automake_version + # autoconf: $autoconf_version + # +@@ -73,7 +73,7 @@ + + PROGRAM=ltmain.sh + PACKAGE=libtool +-VERSION="2.2.6b Debian-2.2.6b-2ubuntu1" ++VERSION="2.2.6b Debian-2.2.6b-2" + TIMESTAMP="" + package_revision=1.3017 + +diff -urN gnome-settings-daemon-2.28.2//Makefile.in gnome-settings-daemon-2.28.2.new//Makefile.in +--- gnome-settings-daemon-2.28.2//Makefile.in 2010-03-10 03:49:30.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//Makefile.in 2010-04-21 19:02:52.429358909 -0700 +@@ -1,9 +1,8 @@ +-# Makefile.in generated by automake 1.11.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +-# Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -14,12 +13,15 @@ + # PARTICULAR PURPOSE. + + @SET_MAKE@ ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkgincludedir = $(includedir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ +-pkglibexecdir = $(libexecdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = . + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -33,37 +35,30 @@ + POST_UNINSTALL = : + build_triplet = @build@ + host_triplet = @host@ +-subdir = . + DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + compile config.guess config.sub depcomp install-sh ltmain.sh \ + missing mkinstalldirs ++subdir = . + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 + am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac + am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) + am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ +- configure.lineno config.status.lineno ++ configure.lineno configure.status.lineno + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = config.h + CONFIG_CLEAN_FILES = +-CONFIG_CLEAN_VPATH_FILES = + SOURCES = + DIST_SOURCES = + RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ +- install-dvi-recursive install-exec-recursive \ +- install-html-recursive install-info-recursive \ +- install-pdf-recursive install-ps-recursive install-recursive \ +- installcheck-recursive installdirs-recursive pdf-recursive \ +- ps-recursive uninstall-recursive +-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ +- distclean-recursive maintainer-clean-recursive +-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ +- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ +- distdir dist dist-all distcheck ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive + ETAGS = etags + CTAGS = ctags + DIST_SUBDIRS = $(SUBDIRS) +@@ -71,40 +66,17 @@ + distdir = $(PACKAGE)-$(VERSION) + top_distdir = $(distdir) + am__remove_distdir = \ +- { test ! -d "$(distdir)" \ +- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ +- && rm -fr "$(distdir)"; }; } +-am__relativize = \ +- dir0=`pwd`; \ +- sed_first='s,^\([^/]*\)/.*$$,\1,'; \ +- sed_rest='s,^[^/]*/*,,'; \ +- sed_last='s,^.*/\([^/]*\)$$,\1,'; \ +- sed_butlast='s,/*[^/]*$$,,'; \ +- while test -n "$$dir1"; do \ +- first=`echo "$$dir1" | sed -e "$$sed_first"`; \ +- if test "$$first" != "."; then \ +- if test "$$first" = ".."; then \ +- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ +- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ +- else \ +- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ +- if test "$$first2" = "$$first"; then \ +- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ +- else \ +- dir2="../$$dir2"; \ +- fi; \ +- dir0="$$dir0"/"$$first"; \ +- fi; \ +- fi; \ +- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ +- done; \ +- reldir="$$dir2" ++ { test ! -d $(distdir) \ ++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr $(distdir); }; } + GZIP_ENV = --best + DIST_ARCHIVES = $(distdir).tar.bz2 + distuninstallcheck_listfiles = find . -type f -print + distcleancheck_listfiles = find . -type f -print + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -139,6 +111,8 @@ + FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@ + FONTCONFIG_LIBS = @FONTCONFIG_LIBS@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +@@ -151,17 +125,45 @@ + GREP = @GREP@ + GSD_INTLTOOL_PLUGIN_RULE = @GSD_INTLTOOL_PLUGIN_RULE@ + GSD_PLUGIN_LDFLAGS = @GSD_PLUGIN_LDFLAGS@ +-INSTALL = @INSTALL@ ++GST_CFLAGS = @GST_CFLAGS@ ++GST_LIBS = @GST_LIBS@ ++HAVE_FONTCONFIG_FALSE = @HAVE_FONTCONFIG_FALSE@ ++HAVE_FONTCONFIG_TRUE = @HAVE_FONTCONFIG_TRUE@ ++HAVE_GSTREAMER_FALSE = @HAVE_GSTREAMER_FALSE@ ++HAVE_GSTREAMER_TRUE = @HAVE_GSTREAMER_TRUE@ ++HAVE_PULSE_FALSE = @HAVE_PULSE_FALSE@ ++HAVE_PULSE_TRUE = @HAVE_PULSE_TRUE@ ++HAVE_XINPUT_FALSE = @HAVE_XINPUT_FALSE@ ++HAVE_XINPUT_TRUE = @HAVE_XINPUT_TRUE@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ + LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBEXECDIR = @LIBEXECDIR@ +@@ -175,8 +177,10 @@ + LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ ++MAINT = @MAINT@ ++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ ++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ +@@ -223,13 +227,13 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -241,7 +245,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -271,12 +274,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + SUBDIRS = \ + gnome-settings-daemon \ +@@ -300,19 +299,19 @@ + .SUFFIXES: + am--refresh: + @: +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ +- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ ++ cd $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ +- $(am__cd) $(top_srcdir) && \ +- $(AUTOMAKE) --gnu Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -327,23 +326,22 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +-$(top_srcdir)/configure: $(am__configure_deps) +- $(am__cd) $(srcdir) && $(AUTOCONF) +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) +- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +-$(am__aclocal_m4_deps): ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ++ cd $(srcdir) && $(AUTOCONF) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + + config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ +- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ ++ $(MAKE) stamp-h1; \ + else :; fi + + stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +-$(srcdir)/config.h.in: $(am__configure_deps) +- ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) ++$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ++ cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +@@ -357,7 +355,8 @@ + -rm -rf .libs _libs + + distclean-libtool: +- -rm -f libtool config.lt ++ -rm -f libtool ++uninstall-info-am: + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -366,7 +365,7 @@ + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. + $(RECURSIVE_TARGETS): +- @fail= failcom='exit 1'; \ ++ @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ +@@ -383,15 +382,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +-$(RECURSIVE_CLEAN_TARGETS): +- @fail= failcom='exit 1'; \ ++mostlyclean-recursive clean-recursive distclean-recursive \ ++maintainer-clean-recursive: ++ @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ +@@ -417,16 +417,16 @@ + else \ + local_target="$$target"; \ + fi; \ +- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done + ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ +- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) +@@ -434,14 +434,14 @@ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- set x; \ ++ tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ +@@ -453,114 +453,94 @@ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ +- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ ++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- shift; \ +- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- if test $$# -gt 0; then \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- "$$@" $$unique; \ +- else \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$unique; \ +- fi; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$unique" \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$unique ++ $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && $(am__cd) $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) "$$here" ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) + $(am__remove_distdir) +- test -d "$(distdir)" || mkdir "$(distdir)" +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ mkdir $(distdir) ++ $(mkdir_p) $(distdir)/data $(distdir)/po ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test -d "$(distdir)/$$file"; then \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ +- fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ +- test -f "$(distdir)/$$file" \ +- || cp -p $$d/$$file "$(distdir)/$$file" \ ++ test -f $(distdir)/$$file \ ++ || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ ++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ +- || $(MKDIR_P) "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ +- fi; \ +- done +- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ +- if test "$$subdir" = .; then :; else \ +- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ +- $(am__relativize); \ +- new_distdir=$$reldir; \ +- dir1=$$subdir; dir2="$(top_distdir)"; \ +- $(am__relativize); \ +- new_top_distdir=$$reldir; \ +- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ +- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ +- ($(am__cd) $$subdir && \ ++ distdir=`$(am__cd) $(distdir) && pwd`; \ ++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ ++ (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ +- top_distdir="$$new_top_distdir" \ +- distdir="$$new_distdir" \ +- am__remove_distdir=: \ +- am__skip_length_check=: \ +- am__skip_mode_fix=: \ ++ top_distdir="$$top_distdir" \ ++ distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done +- -test -n "$(am__skip_mode_fix)" \ +- || find "$(distdir)" -type d ! -perm -755 \ ++ -find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ +- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ +- || chmod -R a+r "$(distdir)" ++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ++ || chmod -R a+r $(distdir) + dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +@@ -568,14 +548,6 @@ + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +-dist-lzma: distdir +- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma +- $(am__remove_distdir) +- +-dist-xz: distdir +- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz +- $(am__remove_distdir) +- + dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) +@@ -599,17 +571,13 @@ + distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ +- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ +- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ +- *.tar.lzma*) \ +- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ +- *.tar.xz*) \ +- xz -dc $(distdir).tar.xz | $(am__untar) ;;\ ++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ +- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac +@@ -617,11 +585,9 @@ + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) +- test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ +- && am__cwd=`pwd` \ +- && $(am__cd) $(distdir)/_build \ ++ && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ +@@ -643,15 +609,13 @@ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ +- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ +- && cd "$$am__cwd" \ +- || exit 1 ++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ +- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' ++ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + distuninstallcheck: +- @$(am__cd) '$(distuninstallcheck_dir)' \ ++ @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ +@@ -693,7 +657,6 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) +- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + + maintainer-clean-generic: +@@ -715,38 +678,18 @@ + + html: html-recursive + +-html-am: +- + info: info-recursive + + info-am: + + install-data-am: + +-install-dvi: install-dvi-recursive +- +-install-dvi-am: +- + install-exec-am: + +-install-html: install-html-recursive +- +-install-html-am: +- + install-info: install-info-recursive + +-install-info-am: +- + install-man: + +-install-pdf: install-pdf-recursive +- +-install-pdf-am: +- +-install-ps: install-ps-recursive +- +-install-ps-am: +- + installcheck-am: + + maintainer-clean: maintainer-clean-recursive +@@ -767,27 +710,24 @@ + + ps-am: + +-uninstall-am: ++uninstall-am: uninstall-info-am + +-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ +- ctags-recursive install-am install-strip tags-recursive ++uninstall-info: uninstall-info-recursive + +-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ +- all all-am am--refresh check check-am clean clean-generic \ +- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ +- dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ +- distcheck distclean distclean-generic distclean-hdr \ +- distclean-libtool distclean-tags distcleancheck distdir \ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ ++ check-am clean clean-generic clean-libtool clean-recursive \ ++ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ ++ dist-shar dist-tarZ dist-zip distcheck distclean \ ++ distclean-generic distclean-hdr distclean-libtool \ ++ distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ +- install install-am install-data install-data-am install-dvi \ +- install-dvi-am install-exec install-exec-am install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-ps install-ps-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ +- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ +- ps ps-am tags tags-recursive uninstall uninstall-am +- ++ maintainer-clean-recursive mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ ++ tags tags-recursive uninstall uninstall-am uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +diff -urN gnome-settings-daemon-2.28.2//missing gnome-settings-daemon-2.28.2.new//missing +--- gnome-settings-daemon-2.28.2//missing 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//missing 2010-04-21 19:02:48.260622132 -0700 +@@ -1,10 +1,10 @@ + #! /bin/sh + # Common stub for a few missing GNU programs while installing. + +-scriptversion=2009-04-28.21; # UTC ++scriptversion=2005-06-08.21 + +-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +-# 2008, 2009 Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. + # Originally by Fran,cois Pinard , 1996. + + # This program is free software; you can redistribute it and/or modify +@@ -18,7 +18,9 @@ + # GNU General Public License for more details. + + # You should have received a copy of the GNU General Public License +-# along with this program. If not, see . ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. + + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -31,8 +33,6 @@ + fi + + run=: +-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +-sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + + # In the cases where this matters, `missing' is being run in the + # srcdir already. +@@ -44,7 +44,7 @@ + + msg="missing on your system" + +-case $1 in ++case "$1" in + --run) + # Try to run requested program, and just exit if it succeeds. + run= +@@ -77,7 +77,6 @@ + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' +- autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c +@@ -87,9 +86,6 @@ + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +-\`g' are ignored when checking the name. +- + Send bug reports to ." + exit $? + ;; +@@ -107,22 +103,15 @@ + + esac + +-# normalize program name to check for. +-program=`echo "$1" | sed ' +- s/^gnu-//; t +- s/^gnu//; t +- s/^g//; t'` +- + # Now exit if we have it, but it failed. Also exit now if we + # don't have it and --version was passed (most likely to detect +-# the program). This is about non-GNU programs, so use $1 not +-# $program. +-case $1 in +- lex*|yacc*) ++# the program). ++case "$1" in ++ lex|yacc) + # Not GNU programs, they don't have --version. + ;; + +- tar*) ++ tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 +@@ -146,7 +135,7 @@ + + # If it does not exist, or fails to run (possibly an outdated version), + # try to emulate it. +-case $program in ++case "$1" in + aclocal*) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if +@@ -156,7 +145,7 @@ + touch aclocal.m4 + ;; + +- autoconf*) ++ autoconf) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the +@@ -165,7 +154,7 @@ + touch configure + ;; + +- autoheader*) ++ autoheader) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want +@@ -175,7 +164,7 @@ + test -z "$files" && files="config.h" + touch_files= + for f in $files; do +- case $f in ++ case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; +@@ -195,7 +184,7 @@ + while read f; do touch "$f"; done + ;; + +- autom4te*) ++ autom4te) + echo 1>&2 "\ + WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the +@@ -203,8 +192,8 @@ + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + +- file=`echo "$*" | sed -n "$sed_output"` +- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` ++ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` ++ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else +@@ -218,78 +207,80 @@ + fi + ;; + +- bison*|yacc*) ++ bison|yacc) + echo 1>&2 "\ + WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h +- if test $# -ne 1; then ++ if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" +- case $LASTARG in ++ case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` +- if test -f "$SRCFILE"; then ++ if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` +- if test -f "$SRCFILE"; then ++ if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi +- if test ! -f y.tab.h; then ++ if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi +- if test ! -f y.tab.c; then ++ if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + +- lex*|flex*) ++ lex|flex) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c +- if test $# -ne 1; then ++ if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" +- case $LASTARG in ++ case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` +- if test -f "$SRCFILE"; then ++ if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi +- if test ! -f lex.yy.c; then ++ if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + +- help2man*) ++ help2man) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + +- file=`echo "$*" | sed -n "$sed_output"` +- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` +- if test -f "$file"; then ++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` ++ if test -z "$file"; then ++ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` ++ fi ++ if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" +- exit $? ++ exit 1 + fi + ;; + +- makeinfo*) ++ makeinfo) + echo 1>&2 "\ + WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file +@@ -298,17 +289,11 @@ + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... +- file=`echo "$*" | sed -n "$sed_output"` +- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` ++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` +- file=`sed -n ' +- /^@setfilename/{ +- s/.* \([^ ]*\) *$/\1/ +- p +- q +- }' $infile` ++ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi +@@ -318,7 +303,7 @@ + touch $file + ;; + +- tar*) ++ tar) + shift + + # We have already tried tar in the generic part. +@@ -332,13 +317,13 @@ + fi + firstarg="$1" + if shift; then +- case $firstarg in ++ case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac +- case $firstarg in ++ case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 +@@ -371,6 +356,5 @@ + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "scriptversion=" + # time-stamp-format: "%:y-%02m-%02d.%02H" +-# time-stamp-time-zone: "UTC" +-# time-stamp-end: "; # UTC" ++# time-stamp-end: "$" + # End: +diff -urN gnome-settings-daemon-2.28.2//mkinstalldirs gnome-settings-daemon-2.28.2.new//mkinstalldirs +--- gnome-settings-daemon-2.28.2//mkinstalldirs 2010-03-10 03:49:30.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//mkinstalldirs 2010-04-21 19:02:52.341359087 -0700 +@@ -1,7 +1,7 @@ + #! /bin/sh + # mkinstalldirs --- make directory hierarchy + +-scriptversion=2009-04-28.21; # UTC ++scriptversion=2005-06-29.22 + + # Original author: Noah Friedman + # Created: 1993-05-16 +@@ -11,9 +11,6 @@ + # bugs to or send patches to + # . + +-nl=' +-' +-IFS=" "" $nl" + errstatus=0 + dirmode= + +@@ -157,6 +154,5 @@ + # eval: (add-hook 'write-file-hooks 'time-stamp) + # time-stamp-start: "scriptversion=" + # time-stamp-format: "%:y-%02m-%02d.%02H" +-# time-stamp-time-zone: "UTC" +-# time-stamp-end: "; # UTC" ++# time-stamp-end: "$" + # End: +diff -urN gnome-settings-daemon-2.28.2//plugins/a11y-keyboard/Makefile.in gnome-settings-daemon-2.28.2.new//plugins/a11y-keyboard/Makefile.in +--- gnome-settings-daemon-2.28.2//plugins/a11y-keyboard/Makefile.in 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//plugins/a11y-keyboard/Makefile.in 2010-04-21 19:02:48.996607830 -0700 +@@ -1,9 +1,8 @@ +-# Makefile.in generated by automake 1.11.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +-# Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,12 +16,15 @@ + + + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkgincludedir = $(includedir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ +-pkglibexecdir = $(libexecdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -48,30 +50,15 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = +-CONFIG_CLEAN_VPATH_FILES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +-am__install_max = 40 +-am__nobase_strip_setup = \ +- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +-am__nobase_strip = \ +- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +-am__nobase_list = $(am__nobase_strip_setup); \ +- for p in $$list; do echo "$$p $$p"; done | \ +- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ +- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ +- if (++n[$$2] == $(am__install_max)) \ +- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ +- END { for (dir in files) print dir, files[dir] }' +-am__base_list = \ +- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ +- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + am__installdirs = "$(DESTDIR)$(plugindir)" \ + "$(DESTDIR)$(gtkbuilderdir)" "$(DESTDIR)$(plugindir)" ++pluginLTLIBRARIES_INSTALL = $(INSTALL) + LTLIBRARIES = $(plugin_LTLIBRARIES) + am__DEPENDENCIES_1 = + liba11y_keyboard_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ +@@ -84,10 +71,6 @@ + liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo \ + $(am__objects_1) + liba11y_keyboard_la_OBJECTS = $(am_liba11y_keyboard_la_OBJECTS) +-liba11y_keyboard_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ +- $(LIBTOOLFLAGS) --mode=link $(CCLD) \ +- $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) \ +- $(liba11y_keyboard_la_LDFLAGS) $(LDFLAGS) -o $@ + am__EXEEXT_1 = + PROGRAMS = $(noinst_PROGRAMS) + am_test_a11y_preferences_dialog_OBJECTS = test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.$(OBJEXT) \ +@@ -97,33 +80,31 @@ + $(am_test_a11y_preferences_dialog_OBJECTS) + test_a11y_preferences_dialog_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) +-test_a11y_preferences_dialog_LINK = $(LIBTOOL) --tag=CC \ +- $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ +- $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles +-am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(liba11y_keyboard_la_SOURCES) \ + $(test_a11y_preferences_dialog_SOURCES) + DIST_SOURCES = $(liba11y_keyboard_la_SOURCES) \ + $(test_a11y_preferences_dialog_SOURCES) ++gtkbuilderDATA_INSTALL = $(INSTALL_DATA) ++pluginDATA_INSTALL = $(INSTALL_DATA) + DATA = $(gtkbuilder_DATA) $(plugin_DATA) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -158,6 +139,8 @@ + FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@ + FONTCONFIG_LIBS = @FONTCONFIG_LIBS@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +@@ -170,17 +153,45 @@ + GREP = @GREP@ + GSD_INTLTOOL_PLUGIN_RULE = @GSD_INTLTOOL_PLUGIN_RULE@ + GSD_PLUGIN_LDFLAGS = @GSD_PLUGIN_LDFLAGS@ +-INSTALL = @INSTALL@ ++GST_CFLAGS = @GST_CFLAGS@ ++GST_LIBS = @GST_LIBS@ ++HAVE_FONTCONFIG_FALSE = @HAVE_FONTCONFIG_FALSE@ ++HAVE_FONTCONFIG_TRUE = @HAVE_FONTCONFIG_TRUE@ ++HAVE_GSTREAMER_FALSE = @HAVE_GSTREAMER_FALSE@ ++HAVE_GSTREAMER_TRUE = @HAVE_GSTREAMER_TRUE@ ++HAVE_PULSE_FALSE = @HAVE_PULSE_FALSE@ ++HAVE_PULSE_TRUE = @HAVE_PULSE_TRUE@ ++HAVE_XINPUT_FALSE = @HAVE_XINPUT_FALSE@ ++HAVE_XINPUT_TRUE = @HAVE_XINPUT_TRUE@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ + LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBEXECDIR = @LIBEXECDIR@ +@@ -194,8 +205,10 @@ + LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ ++MAINT = @MAINT@ ++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ ++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ +@@ -242,13 +255,13 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -260,7 +273,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -290,12 +302,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + gtkbuilderdir = $(pkgdatadir) + gtkbuilder_DATA = \ +@@ -380,18 +388,18 @@ + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ +- && { if test -f $@; then exit 0; else break; fi; }; \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu plugins/a11y-keyboard/Makefile'; \ +- $(am__cd) $(top_srcdir) && \ +- $(AUTOMAKE) --gnu plugins/a11y-keyboard/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu plugins/a11y-keyboard/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu plugins/a11y-keyboard/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -405,32 +413,27 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(am__aclocal_m4_deps): + install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES) + @$(NORMAL_INSTALL) +- test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)" +- @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ +- list2=; for p in $$list; do \ ++ test -z "$(plugindir)" || $(mkdir_p) "$(DESTDIR)$(plugindir)" ++ @list='$(plugin_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ +- list2="$$list2 $$p"; \ ++ f=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=install $(pluginLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(plugindir)/$$f'"; \ ++ $(LIBTOOL) --mode=install $(pluginLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(plugindir)/$$f"; \ + else :; fi; \ +- done; \ +- test -z "$$list2" || { \ +- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \ +- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \ +- } ++ done + + uninstall-pluginLTLIBRARIES: + @$(NORMAL_UNINSTALL) +- @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ +- for p in $$list; do \ +- $(am__strip_dir) \ +- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$f'"; \ +- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$f"; \ ++ @set -x; list='$(plugin_LTLIBRARIES)'; for p in $$list; do \ ++ p=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$p'"; \ ++ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$p"; \ + done + + clean-pluginLTLIBRARIES: +@@ -442,19 +445,17 @@ + rm -f "$${dir}/so_locations"; \ + done + liba11y-keyboard.la: $(liba11y_keyboard_la_OBJECTS) $(liba11y_keyboard_la_DEPENDENCIES) +- $(liba11y_keyboard_la_LINK) -rpath $(plugindir) $(liba11y_keyboard_la_OBJECTS) $(liba11y_keyboard_la_LIBADD) $(LIBS) ++ $(LINK) -rpath $(plugindir) $(liba11y_keyboard_la_LDFLAGS) $(liba11y_keyboard_la_OBJECTS) $(liba11y_keyboard_la_LIBADD) $(LIBS) + + clean-noinstPROGRAMS: +- @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ +- echo " rm -f" $$list; \ +- rm -f $$list || exit $$?; \ +- test -n "$(EXEEXT)" || exit 0; \ +- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f" $$list; \ +- rm -f $$list ++ @list='$(noinst_PROGRAMS)'; for p in $$list; do \ ++ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f $$p $$f"; \ ++ rm -f $$p $$f ; \ ++ done + test-a11y-preferences-dialog$(EXEEXT): $(test_a11y_preferences_dialog_OBJECTS) $(test_a11y_preferences_dialog_DEPENDENCIES) + @rm -f test-a11y-preferences-dialog$(EXEEXT) +- $(test_a11y_preferences_dialog_LINK) $(test_a11y_preferences_dialog_OBJECTS) $(test_a11y_preferences_dialog_LDADD) $(LIBS) ++ $(LINK) $(test_a11y_preferences_dialog_LDFLAGS) $(test_a11y_preferences_dialog_OBJECTS) $(test_a11y_preferences_dialog_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -469,71 +470,71 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo: gsd-a11y-keyboard-plugin.c +-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -MT liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo -MD -MP -MF $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Tpo -c -o liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo `test -f 'gsd-a11y-keyboard-plugin.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-plugin.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Tpo $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Plo ++@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -MT liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo -MD -MP -MF "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Tpo" -c -o liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo `test -f 'gsd-a11y-keyboard-plugin.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-plugin.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Tpo" "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Plo"; else rm -f "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-plugin.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-a11y-keyboard-plugin.c' object='liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -c -o liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo `test -f 'gsd-a11y-keyboard-plugin.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-plugin.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -c -o liba11y_keyboard_la-gsd-a11y-keyboard-plugin.lo `test -f 'gsd-a11y-keyboard-plugin.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-plugin.c + + liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo: gsd-a11y-keyboard-manager.c +-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -MT liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo -MD -MP -MF $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Tpo -c -o liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo `test -f 'gsd-a11y-keyboard-manager.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-manager.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Tpo $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Plo ++@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -MT liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo -MD -MP -MF "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Tpo" -c -o liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo `test -f 'gsd-a11y-keyboard-manager.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-manager.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Tpo" "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Plo"; else rm -f "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-keyboard-manager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-a11y-keyboard-manager.c' object='liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -c -o liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo `test -f 'gsd-a11y-keyboard-manager.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-manager.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -c -o liba11y_keyboard_la-gsd-a11y-keyboard-manager.lo `test -f 'gsd-a11y-keyboard-manager.c' || echo '$(srcdir)/'`gsd-a11y-keyboard-manager.c + + liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo: gsd-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -MT liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo -MD -MP -MF $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Tpo -c -o liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Tpo $(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Plo ++@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -MT liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo -MD -MP -MF "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Tpo" -c -o liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Tpo" "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Plo"; else rm -f "$(DEPDIR)/liba11y_keyboard_la-gsd-a11y-preferences-dialog.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-a11y-preferences-dialog.c' object='liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -c -o liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liba11y_keyboard_la_CPPFLAGS) $(CPPFLAGS) $(liba11y_keyboard_la_CFLAGS) $(CFLAGS) -c -o liba11y_keyboard_la-gsd-a11y-preferences-dialog.lo `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c + + test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o: gsd-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o -MD -MP -MF $(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo -c -o test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo $(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o -MD -MP -MF "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo" -c -o test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo" "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Po"; else rm -f "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-a11y-preferences-dialog.c' object='test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -c -o test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.o `test -f 'gsd-a11y-preferences-dialog.c' || echo '$(srcdir)/'`gsd-a11y-preferences-dialog.c + + test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj: gsd-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj -MD -MP -MF $(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo -c -o test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj `if test -f 'gsd-a11y-preferences-dialog.c'; then $(CYGPATH_W) 'gsd-a11y-preferences-dialog.c'; else $(CYGPATH_W) '$(srcdir)/gsd-a11y-preferences-dialog.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo $(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj -MD -MP -MF "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo" -c -o test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj `if test -f 'gsd-a11y-preferences-dialog.c'; then $(CYGPATH_W) 'gsd-a11y-preferences-dialog.c'; else $(CYGPATH_W) '$(srcdir)/gsd-a11y-preferences-dialog.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo" "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Po"; else rm -f "$(DEPDIR)/test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-a11y-preferences-dialog.c' object='test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -c -o test_a11y_preferences_dialog-gsd-a11y-preferences-dialog.obj `if test -f 'gsd-a11y-preferences-dialog.c'; then $(CYGPATH_W) 'gsd-a11y-preferences-dialog.c'; else $(CYGPATH_W) '$(srcdir)/gsd-a11y-preferences-dialog.c'; fi` + + test_a11y_preferences_dialog-test-a11y-preferences-dialog.o: test-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-test-a11y-preferences-dialog.o -MD -MP -MF $(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo -c -o test_a11y_preferences_dialog-test-a11y-preferences-dialog.o `test -f 'test-a11y-preferences-dialog.c' || echo '$(srcdir)/'`test-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo $(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-test-a11y-preferences-dialog.o -MD -MP -MF "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo" -c -o test_a11y_preferences_dialog-test-a11y-preferences-dialog.o `test -f 'test-a11y-preferences-dialog.c' || echo '$(srcdir)/'`test-a11y-preferences-dialog.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo" "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Po"; else rm -f "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='test-a11y-preferences-dialog.c' object='test_a11y_preferences_dialog-test-a11y-preferences-dialog.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -c -o test_a11y_preferences_dialog-test-a11y-preferences-dialog.o `test -f 'test-a11y-preferences-dialog.c' || echo '$(srcdir)/'`test-a11y-preferences-dialog.c + + test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj: test-a11y-preferences-dialog.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj -MD -MP -MF $(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo -c -o test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj `if test -f 'test-a11y-preferences-dialog.c'; then $(CYGPATH_W) 'test-a11y-preferences-dialog.c'; else $(CYGPATH_W) '$(srcdir)/test-a11y-preferences-dialog.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo $(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -MT test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj -MD -MP -MF "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo" -c -o test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj `if test -f 'test-a11y-preferences-dialog.c'; then $(CYGPATH_W) 'test-a11y-preferences-dialog.c'; else $(CYGPATH_W) '$(srcdir)/test-a11y-preferences-dialog.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo" "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Po"; else rm -f "$(DEPDIR)/test_a11y_preferences_dialog-test-a11y-preferences-dialog.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='test-a11y-preferences-dialog.c' object='test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_a11y_preferences_dialog_CPPFLAGS) $(CPPFLAGS) $(test_a11y_preferences_dialog_CFLAGS) $(CFLAGS) -c -o test_a11y_preferences_dialog-test-a11y-preferences-dialog.obj `if test -f 'test-a11y-preferences-dialog.c'; then $(CYGPATH_W) 'test-a11y-preferences-dialog.c'; else $(CYGPATH_W) '$(srcdir)/test-a11y-preferences-dialog.c'; fi` +@@ -543,126 +544,117 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-gtkbuilderDATA: $(gtkbuilder_DATA) + @$(NORMAL_INSTALL) +- test -z "$(gtkbuilderdir)" || $(MKDIR_P) "$(DESTDIR)$(gtkbuilderdir)" +- @list='$(gtkbuilder_DATA)'; test -n "$(gtkbuilderdir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(gtkbuilderdir)" || $(mkdir_p) "$(DESTDIR)$(gtkbuilderdir)" ++ @list='$(gtkbuilder_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gtkbuilderdir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(gtkbuilderdir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(gtkbuilderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(gtkbuilderdir)/$$f'"; \ ++ $(gtkbuilderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(gtkbuilderdir)/$$f"; \ + done + + uninstall-gtkbuilderDATA: + @$(NORMAL_UNINSTALL) +- @list='$(gtkbuilder_DATA)'; test -n "$(gtkbuilderdir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(gtkbuilderdir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(gtkbuilderdir)" && rm -f $$files ++ @list='$(gtkbuilder_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(gtkbuilderdir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(gtkbuilderdir)/$$f"; \ ++ done + install-pluginDATA: $(plugin_DATA) + @$(NORMAL_INSTALL) +- test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)" +- @list='$(plugin_DATA)'; test -n "$(plugindir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(plugindir)" || $(mkdir_p) "$(DESTDIR)$(plugindir)" ++ @list='$(plugin_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(plugindir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(plugindir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(pluginDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(plugindir)/$$f'"; \ ++ $(pluginDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(plugindir)/$$f"; \ + done + + uninstall-pluginDATA: + @$(NORMAL_UNINSTALL) +- @list='$(plugin_DATA)'; test -n "$(plugindir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(plugindir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(plugindir)" && rm -f $$files ++ @list='$(plugin_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(plugindir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(plugindir)/$$f"; \ ++ done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- set x; \ ++ tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- shift; \ +- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- if test $$# -gt 0; then \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- "$$@" $$unique; \ +- else \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$unique; \ +- fi; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$unique" \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$unique ++ $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && $(am__cd) $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) "$$here" ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ +- sort -u` ;; \ +- esac; \ +- for file in $$dist_files; do \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ +- if test -d "$(distdir)/$$file"; then \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ +- fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ +- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ +- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ +- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ +- test -f "$(distdir)/$$file" \ +- || cp -p $$d/$$file "$(distdir)/$$file" \ ++ test -f $(distdir)/$$file \ ++ || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +@@ -671,7 +663,7 @@ + all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) + installdirs: + for dir in "$(DESTDIR)$(plugindir)" "$(DESTDIR)$(gtkbuilderdir)" "$(DESTDIR)$(plugindir)"; do \ +- test -z "$$dir" || $(MKDIR_P) "$$dir"; \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done + install: install-am + install-exec: install-exec-am +@@ -694,7 +686,6 @@ + + distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) +- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + + maintainer-clean-generic: +@@ -709,7 +700,7 @@ + -rm -rf ./$(DEPDIR) + -rm -f Makefile + distclean-am: clean-am distclean-compile distclean-generic \ +- distclean-tags ++ distclean-libtool distclean-tags + + dvi: dvi-am + +@@ -717,8 +708,6 @@ + + html: html-am + +-html-am: +- + info: info-am + + info-am: +@@ -726,30 +715,12 @@ + install-data-am: install-gtkbuilderDATA install-pluginDATA \ + install-pluginLTLIBRARIES + +-install-dvi: install-dvi-am +- +-install-dvi-am: +- + install-exec-am: + +-install-html: install-html-am +- +-install-html-am: +- + install-info: install-info-am + +-install-info-am: +- + install-man: + +-install-pdf: install-pdf-am +- +-install-pdf-am: +- +-install-ps: install-ps-am +- +-install-ps-am: +- + installcheck-am: + + maintainer-clean: maintainer-clean-am +@@ -770,31 +741,26 @@ + + ps-am: + +-uninstall-am: uninstall-gtkbuilderDATA uninstall-pluginDATA \ +- uninstall-pluginLTLIBRARIES +- +-.MAKE: install-am install-strip ++uninstall-am: uninstall-gtkbuilderDATA uninstall-info-am \ ++ uninstall-pluginDATA uninstall-pluginLTLIBRARIES + + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-noinstPROGRAMS clean-pluginLTLIBRARIES \ + ctags distclean distclean-compile distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ +- install-data-am install-dvi install-dvi-am install-exec \ +- install-exec-am install-gtkbuilderDATA install-html \ +- install-html-am install-info install-info-am install-man \ +- install-pdf install-pdf-am install-pluginDATA \ +- install-pluginLTLIBRARIES install-ps install-ps-am \ ++ install-data-am install-exec install-exec-am \ ++ install-gtkbuilderDATA install-info install-info-am \ ++ install-man install-pluginDATA install-pluginLTLIBRARIES \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ +- uninstall-gtkbuilderDATA uninstall-pluginDATA \ +- uninstall-pluginLTLIBRARIES ++ uninstall-gtkbuilderDATA uninstall-info-am \ ++ uninstall-pluginDATA uninstall-pluginLTLIBRARIES + + + @GSD_INTLTOOL_PLUGIN_RULE@ +- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +diff -urN gnome-settings-daemon-2.28.2//plugins/background/Makefile.in gnome-settings-daemon-2.28.2.new//plugins/background/Makefile.in +--- gnome-settings-daemon-2.28.2//plugins/background/Makefile.in 2010-03-10 03:49:28.000000000 -0800 ++++ gnome-settings-daemon-2.28.2.new//plugins/background/Makefile.in 2010-04-21 19:02:49.206357657 -0700 +@@ -1,9 +1,8 @@ +-# Makefile.in generated by automake 1.11.1 from Makefile.am. ++# Makefile.in generated by automake 1.9.6 from Makefile.am. + # @configure_input@ + + # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +-# Inc. ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -17,12 +16,15 @@ + + + ++srcdir = @srcdir@ ++top_srcdir = @top_srcdir@ + VPATH = @srcdir@ + pkgdatadir = $(datadir)/@PACKAGE@ +-pkgincludedir = $(includedir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ +-pkglibexecdir = $(libexecdir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++top_builddir = ../.. + am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++INSTALL = @INSTALL@ + install_sh_DATA = $(install_sh) -c -m 644 + install_sh_PROGRAM = $(install_sh) -c + install_sh_SCRIPT = $(install_sh) -c +@@ -47,29 +49,14 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = +-CONFIG_CLEAN_VPATH_FILES = + am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; + am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +-am__install_max = 40 +-am__nobase_strip_setup = \ +- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +-am__nobase_strip = \ +- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +-am__nobase_list = $(am__nobase_strip_setup); \ +- for p in $$list; do echo "$$p $$p"; done | \ +- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ +- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ +- if (++n[$$2] == $(am__install_max)) \ +- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ +- END { for (dir in files) print dir, files[dir] }' +-am__base_list = \ +- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ +- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; + am__installdirs = "$(DESTDIR)$(plugindir)" "$(DESTDIR)$(plugindir)" ++pluginLTLIBRARIES_INSTALL = $(INSTALL) + LTLIBRARIES = $(plugin_LTLIBRARIES) + am__DEPENDENCIES_1 = + libbackground_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ +@@ -79,9 +66,6 @@ + libbackground_la-gsd-background-plugin.lo \ + libbackground_la-gsd-background-manager.lo $(am__objects_1) + libbackground_la_OBJECTS = $(am_libbackground_la_OBJECTS) +-libbackground_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ +- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(libbackground_la_CFLAGS) \ +- $(CFLAGS) $(libbackground_la_LDFLAGS) $(LDFLAGS) -o $@ + am__EXEEXT_1 = + PROGRAMS = $(noinst_PROGRAMS) + am_test_background_OBJECTS = \ +@@ -92,30 +76,28 @@ + test_background_DEPENDENCIES = \ + $(top_builddir)/gnome-settings-daemon/libgsd-profile.la \ + $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) +-test_background_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ +- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(test_background_CFLAGS) \ +- $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles +-am__mv = mv -f + COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ +- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) + CCLD = $(CC) +-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ +- --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ +- $(LDFLAGS) -o $@ ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ + SOURCES = $(libbackground_la_SOURCES) $(test_background_SOURCES) + DIST_SOURCES = $(libbackground_la_SOURCES) $(test_background_SOURCES) ++pluginDATA_INSTALL = $(INSTALL_DATA) + DATA = $(plugin_DATA) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + ACLOCAL = @ACLOCAL@ + ALL_LINGUAS = @ALL_LINGUAS@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ + AMTAR = @AMTAR@ + AR = @AR@ + AUTOCONF = @AUTOCONF@ +@@ -150,6 +132,8 @@ + FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@ + FONTCONFIG_LIBS = @FONTCONFIG_LIBS@ + GCONFTOOL = @GCONFTOOL@ ++GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@ ++GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@ + GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@ + GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@ + GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +@@ -162,17 +146,45 @@ + GREP = @GREP@ + GSD_INTLTOOL_PLUGIN_RULE = @GSD_INTLTOOL_PLUGIN_RULE@ + GSD_PLUGIN_LDFLAGS = @GSD_PLUGIN_LDFLAGS@ +-INSTALL = @INSTALL@ ++GST_CFLAGS = @GST_CFLAGS@ ++GST_LIBS = @GST_LIBS@ ++HAVE_FONTCONFIG_FALSE = @HAVE_FONTCONFIG_FALSE@ ++HAVE_FONTCONFIG_TRUE = @HAVE_FONTCONFIG_TRUE@ ++HAVE_GSTREAMER_FALSE = @HAVE_GSTREAMER_FALSE@ ++HAVE_GSTREAMER_TRUE = @HAVE_GSTREAMER_TRUE@ ++HAVE_PULSE_FALSE = @HAVE_PULSE_FALSE@ ++HAVE_PULSE_TRUE = @HAVE_PULSE_TRUE@ ++HAVE_XINPUT_FALSE = @HAVE_XINPUT_FALSE@ ++HAVE_XINPUT_TRUE = @HAVE_XINPUT_TRUE@ + INSTALL_DATA = @INSTALL_DATA@ + INSTALL_PROGRAM = @INSTALL_PROGRAM@ + INSTALL_SCRIPT = @INSTALL_SCRIPT@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ + LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBEXECDIR = @LIBEXECDIR@ +@@ -186,8 +198,10 @@ + LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ ++MAINT = @MAINT@ ++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ ++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ + MAKEINFO = @MAKEINFO@ +-MKDIR_P = @MKDIR_P@ + MKINSTALLDIRS = @MKINSTALLDIRS@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ +@@ -234,13 +248,13 @@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + X_LIBS = @X_LIBS@ + X_PRE_LIBS = @X_PRE_LIBS@ +-abs_builddir = @abs_builddir@ +-abs_srcdir = @abs_srcdir@ +-abs_top_builddir = @abs_top_builddir@ +-abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ + ac_ct_CXX = @ac_ct_CXX@ + ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -252,7 +266,6 @@ + build_cpu = @build_cpu@ + build_os = @build_os@ + build_vendor = @build_vendor@ +-builddir = @builddir@ + datadir = @datadir@ + datarootdir = @datarootdir@ + docdir = @docdir@ +@@ -282,12 +295,8 @@ + psdir = @psdir@ + sbindir = @sbindir@ + sharedstatedir = @sharedstatedir@ +-srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ +-top_builddir = @top_builddir@ +-top_srcdir = @top_srcdir@ + NULL = + test_background_SOURCES = \ + test-background.c \ +@@ -359,18 +368,18 @@ + + .SUFFIXES: + .SUFFIXES: .c .lo .o .obj +-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ +- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ +- && { if test -f $@; then exit 0; else break; fi; }; \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ + exit 1;; \ + esac; \ + done; \ +- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu plugins/background/Makefile'; \ +- $(am__cd) $(top_srcdir) && \ +- $(AUTOMAKE) --gnu plugins/background/Makefile ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu plugins/background/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu plugins/background/Makefile + .PRECIOUS: Makefile + Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ +@@ -384,32 +393,27 @@ + $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-$(top_srcdir)/configure: $(am__configure_deps) ++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +-$(am__aclocal_m4_deps): + install-pluginLTLIBRARIES: $(plugin_LTLIBRARIES) + @$(NORMAL_INSTALL) +- test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)" +- @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ +- list2=; for p in $$list; do \ ++ test -z "$(plugindir)" || $(mkdir_p) "$(DESTDIR)$(plugindir)" ++ @list='$(plugin_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ +- list2="$$list2 $$p"; \ ++ f=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=install $(pluginLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(plugindir)/$$f'"; \ ++ $(LIBTOOL) --mode=install $(pluginLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(plugindir)/$$f"; \ + else :; fi; \ +- done; \ +- test -z "$$list2" || { \ +- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(plugindir)'"; \ +- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(plugindir)"; \ +- } ++ done + + uninstall-pluginLTLIBRARIES: + @$(NORMAL_UNINSTALL) +- @list='$(plugin_LTLIBRARIES)'; test -n "$(plugindir)" || list=; \ +- for p in $$list; do \ +- $(am__strip_dir) \ +- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$f'"; \ +- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$f"; \ ++ @set -x; list='$(plugin_LTLIBRARIES)'; for p in $$list; do \ ++ p=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(plugindir)/$$p'"; \ ++ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(plugindir)/$$p"; \ + done + + clean-pluginLTLIBRARIES: +@@ -421,19 +425,17 @@ + rm -f "$${dir}/so_locations"; \ + done + libbackground.la: $(libbackground_la_OBJECTS) $(libbackground_la_DEPENDENCIES) +- $(libbackground_la_LINK) -rpath $(plugindir) $(libbackground_la_OBJECTS) $(libbackground_la_LIBADD) $(LIBS) ++ $(LINK) -rpath $(plugindir) $(libbackground_la_LDFLAGS) $(libbackground_la_OBJECTS) $(libbackground_la_LIBADD) $(LIBS) + + clean-noinstPROGRAMS: +- @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ +- echo " rm -f" $$list; \ +- rm -f $$list || exit $$?; \ +- test -n "$(EXEEXT)" || exit 0; \ +- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ +- echo " rm -f" $$list; \ +- rm -f $$list ++ @list='$(noinst_PROGRAMS)'; for p in $$list; do \ ++ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f $$p $$f"; \ ++ rm -f $$p $$f ; \ ++ done + test-background$(EXEEXT): $(test_background_OBJECTS) $(test_background_DEPENDENCIES) + @rm -f test-background$(EXEEXT) +- $(test_background_LINK) $(test_background_OBJECTS) $(test_background_LDADD) $(LIBS) ++ $(LINK) $(test_background_LDFLAGS) $(test_background_OBJECTS) $(test_background_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -447,64 +449,64 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_background-test-background.Po@am__quote@ + + .c.o: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c $< + + .c.obj: +-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + + .c.lo: +-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + libbackground_la-gsd-background-plugin.lo: gsd-background-plugin.c +-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -MT libbackground_la-gsd-background-plugin.lo -MD -MP -MF $(DEPDIR)/libbackground_la-gsd-background-plugin.Tpo -c -o libbackground_la-gsd-background-plugin.lo `test -f 'gsd-background-plugin.c' || echo '$(srcdir)/'`gsd-background-plugin.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libbackground_la-gsd-background-plugin.Tpo $(DEPDIR)/libbackground_la-gsd-background-plugin.Plo ++@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -MT libbackground_la-gsd-background-plugin.lo -MD -MP -MF "$(DEPDIR)/libbackground_la-gsd-background-plugin.Tpo" -c -o libbackground_la-gsd-background-plugin.lo `test -f 'gsd-background-plugin.c' || echo '$(srcdir)/'`gsd-background-plugin.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libbackground_la-gsd-background-plugin.Tpo" "$(DEPDIR)/libbackground_la-gsd-background-plugin.Plo"; else rm -f "$(DEPDIR)/libbackground_la-gsd-background-plugin.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-background-plugin.c' object='libbackground_la-gsd-background-plugin.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -c -o libbackground_la-gsd-background-plugin.lo `test -f 'gsd-background-plugin.c' || echo '$(srcdir)/'`gsd-background-plugin.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -c -o libbackground_la-gsd-background-plugin.lo `test -f 'gsd-background-plugin.c' || echo '$(srcdir)/'`gsd-background-plugin.c + + libbackground_la-gsd-background-manager.lo: gsd-background-manager.c +-@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -MT libbackground_la-gsd-background-manager.lo -MD -MP -MF $(DEPDIR)/libbackground_la-gsd-background-manager.Tpo -c -o libbackground_la-gsd-background-manager.lo `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libbackground_la-gsd-background-manager.Tpo $(DEPDIR)/libbackground_la-gsd-background-manager.Plo ++@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -MT libbackground_la-gsd-background-manager.lo -MD -MP -MF "$(DEPDIR)/libbackground_la-gsd-background-manager.Tpo" -c -o libbackground_la-gsd-background-manager.lo `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libbackground_la-gsd-background-manager.Tpo" "$(DEPDIR)/libbackground_la-gsd-background-manager.Plo"; else rm -f "$(DEPDIR)/libbackground_la-gsd-background-manager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-background-manager.c' object='libbackground_la-gsd-background-manager.lo' libtool=yes @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +-@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -c -o libbackground_la-gsd-background-manager.lo `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c ++@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libbackground_la_CPPFLAGS) $(CPPFLAGS) $(libbackground_la_CFLAGS) $(CFLAGS) -c -o libbackground_la-gsd-background-manager.lo `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c + + test_background-test-background.o: test-background.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-test-background.o -MD -MP -MF $(DEPDIR)/test_background-test-background.Tpo -c -o test_background-test-background.o `test -f 'test-background.c' || echo '$(srcdir)/'`test-background.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_background-test-background.Tpo $(DEPDIR)/test_background-test-background.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-test-background.o -MD -MP -MF "$(DEPDIR)/test_background-test-background.Tpo" -c -o test_background-test-background.o `test -f 'test-background.c' || echo '$(srcdir)/'`test-background.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_background-test-background.Tpo" "$(DEPDIR)/test_background-test-background.Po"; else rm -f "$(DEPDIR)/test_background-test-background.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='test-background.c' object='test_background-test-background.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -c -o test_background-test-background.o `test -f 'test-background.c' || echo '$(srcdir)/'`test-background.c + + test_background-test-background.obj: test-background.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-test-background.obj -MD -MP -MF $(DEPDIR)/test_background-test-background.Tpo -c -o test_background-test-background.obj `if test -f 'test-background.c'; then $(CYGPATH_W) 'test-background.c'; else $(CYGPATH_W) '$(srcdir)/test-background.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_background-test-background.Tpo $(DEPDIR)/test_background-test-background.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-test-background.obj -MD -MP -MF "$(DEPDIR)/test_background-test-background.Tpo" -c -o test_background-test-background.obj `if test -f 'test-background.c'; then $(CYGPATH_W) 'test-background.c'; else $(CYGPATH_W) '$(srcdir)/test-background.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_background-test-background.Tpo" "$(DEPDIR)/test_background-test-background.Po"; else rm -f "$(DEPDIR)/test_background-test-background.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='test-background.c' object='test_background-test-background.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -c -o test_background-test-background.obj `if test -f 'test-background.c'; then $(CYGPATH_W) 'test-background.c'; else $(CYGPATH_W) '$(srcdir)/test-background.c'; fi` + + test_background-gsd-background-manager.o: gsd-background-manager.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-gsd-background-manager.o -MD -MP -MF $(DEPDIR)/test_background-gsd-background-manager.Tpo -c -o test_background-gsd-background-manager.o `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_background-gsd-background-manager.Tpo $(DEPDIR)/test_background-gsd-background-manager.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-gsd-background-manager.o -MD -MP -MF "$(DEPDIR)/test_background-gsd-background-manager.Tpo" -c -o test_background-gsd-background-manager.o `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_background-gsd-background-manager.Tpo" "$(DEPDIR)/test_background-gsd-background-manager.Po"; else rm -f "$(DEPDIR)/test_background-gsd-background-manager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-background-manager.c' object='test_background-gsd-background-manager.o' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -c -o test_background-gsd-background-manager.o `test -f 'gsd-background-manager.c' || echo '$(srcdir)/'`gsd-background-manager.c + + test_background-gsd-background-manager.obj: gsd-background-manager.c +-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-gsd-background-manager.obj -MD -MP -MF $(DEPDIR)/test_background-gsd-background-manager.Tpo -c -o test_background-gsd-background-manager.obj `if test -f 'gsd-background-manager.c'; then $(CYGPATH_W) 'gsd-background-manager.c'; else $(CYGPATH_W) '$(srcdir)/gsd-background-manager.c'; fi` +-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/test_background-gsd-background-manager.Tpo $(DEPDIR)/test_background-gsd-background-manager.Po ++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -MT test_background-gsd-background-manager.obj -MD -MP -MF "$(DEPDIR)/test_background-gsd-background-manager.Tpo" -c -o test_background-gsd-background-manager.obj `if test -f 'gsd-background-manager.c'; then $(CYGPATH_W) 'gsd-background-manager.c'; else $(CYGPATH_W) '$(srcdir)/gsd-background-manager.c'; fi`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/test_background-gsd-background-manager.Tpo" "$(DEPDIR)/test_background-gsd-background-manager.Po"; else rm -f "$(DEPDIR)/test_background-gsd-background-manager.Tpo"; exit 1; fi + @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-background-manager.c' object='test_background-gsd-background-manager.obj' libtool=no @AMDEPBACKSLASH@ + @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_background_CPPFLAGS) $(CPPFLAGS) $(test_background_CFLAGS) $(CFLAGS) -c -o test_background-gsd-background-manager.obj `if test -f 'gsd-background-manager.c'; then $(CYGPATH_W) 'gsd-background-manager.c'; else $(CYGPATH_W) '$(srcdir)/gsd-background-manager.c'; fi` +@@ -514,106 +516,100 @@ + + clean-libtool: + -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-pluginDATA: $(plugin_DATA) + @$(NORMAL_INSTALL) +- test -z "$(plugindir)" || $(MKDIR_P) "$(DESTDIR)$(plugindir)" +- @list='$(plugin_DATA)'; test -n "$(plugindir)" || list=; \ +- for p in $$list; do \ ++ test -z "$(plugindir)" || $(mkdir_p) "$(DESTDIR)$(plugindir)" ++ @list='$(plugin_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ +- echo "$$d$$p"; \ +- done | $(am__base_list) | \ +- while read files; do \ +- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(plugindir)'"; \ +- $(INSTALL_DATA) $$files "$(DESTDIR)$(plugindir)" || exit $$?; \ ++ f=$(am__strip_dir) \ ++ echo " $(pluginDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(plugindir)/$$f'"; \ ++ $(pluginDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(plugindir)/$$f"; \ + done + + uninstall-pluginDATA: + @$(NORMAL_UNINSTALL) +- @list='$(plugin_DATA)'; test -n "$(plugindir)" || list=; \ +- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ +- test -n "$$files" || exit 0; \ +- echo " ( cd '$(DESTDIR)$(plugindir)' && rm -f" $$files ")"; \ +- cd "$(DESTDIR)$(plugindir)" && rm -f $$files ++ @list='$(plugin_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(plugindir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(plugindir)/$$f"; \ ++ done + + ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ + mkid -fID $$unique + tags: TAGS + + TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) +- set x; \ ++ tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- shift; \ +- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ +- if test $$# -gt 0; then \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- "$$@" $$unique; \ +- else \ +- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ +- $$unique; \ +- fi; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ + fi + ctags: CTAGS + CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ +- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ +- END { if (nonempty) { for (i in files) print i; }; }'`; \ +- test -z "$(CTAGS_ARGS)$$unique" \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ +- $$unique ++ $$tags $$unique + + GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ +- && $(am__cd) $(top_srcdir) \ +- && gtags -i $(GTAGS_ARGS) "$$here" ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ +- list='$(DISTFILES)'; \ +- dist_files=`for file in $$list; do echo $$file; done | \ +- sed -e "s|^$$srcdirstrip/||;t" \ +- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ +- case $$dist_files in \ +- */*) $(MKDIR_P) `echo "$$dist_files" | \ +- sed '/\//!d;s|